Jump to content
SAU Community

Recommended Posts

To be fair, this motor has well and truly had the nissan let out before now, and was making 3x the power the engine was designed for.

Johnny let me know if the car hasn't made it back home yet and you need a hand

  • Like 1

"To be fair, this motor has BUILT BY JOHHNY THE SAVAGE, and was making 3x the power the engine was designed for.

Johnny ALSO JUST WENT FULL SEND WHEN IT WAS PROBS SUFFERING OIL STARVATION LIKE MANY RBs DO AT THE TRACK"

Fixed your post Duncan ?

  • Haha 1
31 minutes ago, Duncan said:

Johnny let me know if the car hasn't made it back home yet and you need a hand

Thanks for the offer Duncan, but got the car back to my mate's warehouse last night at about midnight. Had to wait for him to head back to Sydney unload his car, then head back out to get my shit box - luckily the trailer has a winch because if it didn't I would have probably dumped the car there.

28 minutes ago, ActionDan said:

"To be fair, this motor has BUILT BY JOHHNY THE SAVAGE, and was making 3x the power the engine was designed for.

Johnny ALSO JUST WENT FULL SEND WHEN IT WAS PROBS SUFFERING OIL STARVATION LIKE MANY RBs DO AT THE TRACK"

Fixed your post Duncan ?

LOL... correct, Haltech told me many times to stop driving but I just rolled into the pits and restarted the car - watched for oil pressure and straight out to the track again. Probably did about a good 60+ laps.

 

  • Like 1
1 minute ago, reaper said:

Time to buy a beemer ;)

I like your thinking :)

Did look at the V8 E92 M3 in Manual on Carsales this morning in bed, very affordable - I think might be a future classic too, of course I won't touch the SMG version because they're full of issues.

19 minutes ago, ActionDan said:

I know you will share them so I look forward to pics of the carnage. 

 

Sure will, should be interesting what we find/see

10 minutes ago, Dose Pipe Sutututu said:

I like your thinking :)

Did look at the V8 E92 M3 in Manual on Carsales this morning in bed, very affordable - I think might be a future classic too, of course I won't touch the SMG version because they're full of issues.

*cough* rod bearings are apparently a general maintenance item *cough* 

  • Haha 1
40 minutes ago, Dose Pipe Sutututu said:

I like your thinking :)

Did look at the V8 E92 M3 in Manual on Carsales this morning in bed, very affordable - I think might be a future classic too, of course I won't touch the SMG version because they're full of issues.

The e92 actually has a dct which is fine. Smg was an e46/e60 thing and absolute garbage.

That being said id always go manual for more fun :D

F80's are getting cheap and imo are a fair step above an e92 with a few key areas taken care of.

  • Like 2
5 hours ago, GTofuS-T said:

tis a shame, if it wasn't for the haltech you might have had the engine failure on the track offering much more street cred and gram likes

didn't put a hole through the block and through the body work.. no IG likes or won't be all over Snapchat

 

5 hours ago, reaper said:

The e92 actually has a dct which is fine. Smg was an e46/e60 thing and absolute garbage.

That being said id always go manual for more fun :D

F80's are getting cheap and imo are a fair step above an e92 with a few key areas taken care of.

The reason I like of like the E90/2 M3 more is because it's rare(?) being a V8, it could potentially be a classic in say 10~15 years time.. who knows right?

 

  • Like 2

Now you know why I’m avoiding circuit work

unless something is dry sumped it’s SO not worth the damage to the motor, why risk big dollars for a few mins of fun 

roll racing and street duties is good enough for the motor to last a LONG time 

4 hours ago, BakemonoRicer said:

Now you know why I’m avoiding circuit work

unless something is dry sumped it’s SO not worth the damage to the motor, why risk big dollars for a few mins of fun 

roll racing and street duties is good enough for the motor to last a LONG time 

 

Just run an oil accumulator for a bit of cheap insurance. 

  • Like 2
2 hours ago, WR33KD said:

Needed a head drain.

I don't think that's the issue, however it may have helped with either draining back more oil or just simply reducing crank case pressure and allowing oil to flow down through the galleries.

There's a fundamental issue with my oil pickup (AWD motor with modded RWD ASR sump) where the pickup has been moved forward to suit the RWD sump.

I suspect on full noise around big high speed corners (back straight before the last turn at Wakefield) all the oil us rushing back and because the pickup is right at the front it's being exposed to air thus tripping the engine protection.

Oh wells, see what happens. This will be on the backburner for a while as we're getting ready to sell our house.

16 hours ago, Dose Pipe Sutututu said:

The reason I like of like the E90/2 M3 more is because it's rare(?) being a V8, it could potentially be a classic in say 10~15 years time.. who knows right?

 

Agree, same reason I lusted after one for a while. 

Sometimes I think I should just buy the thing, enjoy it for 1 year or 2 then move it on and realistically my chances of seeing the failure I am fretting about would be slim. 

10 hours ago, BakemonoRicer said:

Now you know why I’m avoiding circuit work

unless something is dry sumped it’s SO not worth the damage to the motor, why risk big dollars for a few mins of fun 

roll racing and street duties is good enough for the motor to last a LONG time 

Dry sump isn't the be all and end all, I've seen dry sumped cars spin bearings too due to poor setup of the dry sump system. Nissan's suffer excess crankcase pressure so equalizing that is paramount. In the CA, which is still an original bottom end, I just did it with a mess of pipes and 2 separate breathing systems (top and bottom) problem solved. It could be done neater but it was a proof of concept at the time. I also tested crankcase evac kits (Morosso) and did not have good results. 

Accumulators don't address the root cause, they just throw oil back in when the issue is most prevalent. They also fail, have seen spun bearings on cars fitted with them. Nothing is fool proof. This is why we have engine protection....

6 hours ago, Unzipped Composites said:

 

Just run an oil accumulator for a bit of cheap insurance. 

See above.

3 hours ago, WR33KD said:

Needed a head drain.

Would've helped no doubt. 

44 minutes ago, Dose Pipe Sutututu said:

I don't think that's the issue, however it may have helped with either draining back more oil or just simply reducing crank case pressure and allowing oil to flow down through the galleries.

There's a fundamental issue with my oil pickup (AWD motor with modded RWD ASR sump) where the pickup has been moved forward to suit the RWD sump.

I suspect on full noise around big high speed corners (back straight before the last turn at Wakefield) all the oil us rushing back and because the pickup is right at the front it's being exposed to air thus tripping the engine protection.

Oh wells, see what happens. This will be on the backburner for a while as we're getting ready to sell our house.

I dont think there's any prizes for guessing this will be an oil starvation issue ?

Good luck with the house sellz, get dat paper then see where you're at. 

Have you got a new place sorted already? 

  • Like 1
1 hour ago, ActionDan said:

Have you got a new place sorted already? 

No LOL ...

When we wanted to buy a place, ANZ couldn't get our loan sorted - in fact they took 129 days from application through to settlement to re-finance our investment & current place. Ended up cracking the shits and told them to forget about the pre-approval for the next property and went with FirstMac and they approved us in 3 days!

Now we are fully funded, ready to go - there's nothing to buy :(

Spoke to a few people in Real Estate and they said I should list/sell our current property before the supply picks up, means there's a bit less choice for buyers and we'll get the money we want. I did however put in the contract we are able to rent it back for up to 3 months if required. Here's hoping the right property comes up this week, we go put a deposit on it and there's a big garage/hoist outback for the shit box lol.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
    • Welcome!  Can't go wrong with a Stag.
    • Looks good. Nice height.
    • Hey all, a little help from the Stagea hive mind plz.. I'm days away from buying either a 2002 Stagea 250tRS AR-X Four, premium leather, power seats and all the old switches etc that go with it, or a 2002 Stagea 250tRS VR-X Four AERO, pov pack, cloth seats etc, with coil overs, sports zorst, comes with original zorst and suspension and parts. (I think I've got the models right?) Both are VQ25DET, have 160000kms, both straight no rust both with $2000+ in recent servicing receipts, both ride on aftermarket 18" rims. The Aero has a replaced turbo as well. I like the cool factor of the Aero car but the AR-X has never been modified. Neither have been driven hardly at all in the last 5 years. Any thoughts on which one or does it come down to personal preference? davemoto 
×
×
  • Create New...