Jump to content
SAU Community

Recommended Posts

Steve's R33 LM Limited Upkeep

Hi all,

I've been stalking these pages for a quite a long time now. Thought i should throw my car up for everyone to look at.

Some of you will be familiar with this car already as I purchased it from Gav in Perth. Gav had this car built by Glavsport and it has been a no expense spared build.

With that in mind I too have decided to buy things once and any changes that go onto the car will be the highest quality I can reasonably manage. You may be aware that my start with this car was somewhat turbulent as someone tried to steal it from me on the first day I drove it. (See link: Steve's Intro ).

Since then I have hidden the car away under lock and key (and other security measures). The car has just returned to me now from Racepace in Bayswater. 

We (well, not really we, more the guys at Racepace) made some changes to my car, repaired the damage from the break in and installed a new immobiliser and tracker. It's nice to have the car back in one piece and using a key to start it, rather than any flat item jammed into what was left of the ignition.

One of the biggest issues I was having was fumes coming into the cabin from under the bonnet/car. It turned out to be a twofold issue. 

1. The exhaust was pinched and suffering from E85 damage (it was a 3" mild steel exhaust) 

2. The oil catch can breather may have been letting fumes into the air vents for inside the car. 

The guys at Racepace have fabricated and installed a brand new 3.5" exhaust with V-Bands and tuned length headers to solve the exhaust problems and they also rerouted the catch can fumes into the rear turbo so they are expelled through the exhaust. 

With the new exhaust it was necessary to re-tune the car on the dyno so this was also completed. As someone who doesn't get to drive fast cars much, millions of kWs were deemed unnecessary. I asked the guys specifically if they could turn the engine down to a level it will be happy to perform at for a long, long time. 

In tuning the car the guys turned the engine up to what they deemed a reasonable level, then turned it back down as I requested. 

The net result of the tuning was: 

Full power: 505.4kW (atw) at 27psi

Final Tune: 410kW (atw) at 22psi

I've also got some pictures of the exhaust going in and a dyno run video coming soon.

IMG_4365.JPG

IMG_4364.JPG

IMG_3832.JPG

IMG_3788.JPG

  • Like 7
Link to comment
https://www.sau.com.au/forums/topic/470372-steves-r33-lm-limited-upkeep/
Share on other sites

I can do one better for you:

Made this up when I was feeling enthused one night. It's a one take on my iPhone...

I'll get some more pictures up shortly.

Edit:*** In fact you can still see the fingerprint powder if you look closely.

 

Edited by Steve85
  • Like 2

I had taken the car to a trackday at Sandown in January. 

It turned out to be a 38 degree day, my car managed to turn a full 3 consecutive laps before it began to complain. The car was not revving cleanly in morning and by afternoon was in full misfire mode (even being babied down the straights). I pulled the pin around 2pm and went home. 

I had not gotten anywhere near the limit of the tires nor the engine the whole day, which was slightly disappointing.

Racepace have diagnosed that the igniter was not coping with the heat and replaced it for me. Now I have the car back i'll be hoping to go to another day at Sandown to have a real go. So when i was driving it on the road (when is was cool) the car would be fine, but on the track in that heat it just wasn't coping.

I took a friend for a drive the other night, the thing pulls like a monster. I will add that I am convinced the diff gearing is too short. You barely have a chance to think before you need to pull the next gear (yes even 3rd to 4th) Once your in fourth and fifth you have some time, but still not as much as you might think. It also meant gear changes where longer gears would have held down short straights.

Still diff gearing can wait for a while i think.

11 minutes ago, Robzilla32 said:

I saw this beauty when I was picking my car up from RacePace. Very nice indeed.

Thanks! I use every excuse under the sun to visit Racepace instead of calling them on the phone.

So many wonderful cars in such a small place. Gareth always talks me through the work they're doing on each one. I'm like a kid in a giant toy factory...

Steve just to clarify in your original post. The catch can return hose is being re-routed to the rear turbo INTAKE pipe. The idea behind that is that the catch can catches all the oil vapour, but returns the air back to the intake and into your engine (creating a sealed legal system). This also allows the catch can system to be more efficient as well. 

Good write up though! You should definitely fill people in on the custom turbo setup and what other goodies you have hidden away!

- Matt from RPM.

  • Like 1
15 hours ago, Borci88 said:

clarify in your original post. The catch can return hose is being re-routed to the rear turbo INTAKE pipe.

Ahhh... yep. ^This. In my excitement I have gotten this description wrong. I plan to get some more details of the car written in here, just so you all know what hides in the car. And of course, i'll be updating this to reflect any work that is completed on the car to keep it in good condition.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...