Jump to content
SAU Community

Recommended Posts

Haven't got a car to look at just now but I think you need to pull up the plate at the bottom of the door and pull the door rubber back to remove the trim to get at the ecu and there are a total of 2 or 3 I think nuts to remove. Then undo the 10mm bolt in the middle of the plug and pull the plug out and then remove the ecu.

33 minutes ago, kimbod said:

That looks like someone has done that so it can't be removed.

Yup.  Looks like the nuts have been ground down in some weird arsed way.  Your best approach would be brute force and violence.

13 minutes ago, Dose Pipe Sutututu said:

why would you want a PowerFC in a GT-R, get something modern/better

I'm with him.  PFC is a f**king terrible idea in 2018.  Was a terrible idea in 2008!

I did this job in my 34R, yours has been modified incorrectly - As those should be 10mm bolts. 

You will need to brute force those pop rivets/shear bolts? as gently as you can to not damage the underlying bracket. 

As mentioned, it would be much better to use something newer. I had decent results with Haltech plug in, but there's lots of options. Ideally something that removes the AFMs if possible. 

If that's not an option, choose your tuner carefully as PFC+AFM has been known to result in various drivability issues. Ideally only use it for lower power goal.

Good luck.

 

 

There’s a few ways to get them out,

you can cut a slit through the middle and use a screw driver,

you can file 2 flats either side of the head and use vice grips to turn them 

or you can use a center punch and hammer to turn them 

1 hour ago, r32-25t said:

There’s a few ways to get them out,

you can cut a slit through the middle and use a screw driver,

you can file 2 flats either side of the head and use vice grips to turn them 

or you can use a center punch and hammer to turn them 

18V angle grinder and just remove the bits that annoy you!

4 hours ago, Dose Pipe Sutututu said:

why would you want a PowerFC in a GT-R, get something modern/better

just wanted something cheap to try stop it from running ridiculously rich on 98... currently get maybe 185ks out of a tank

 

3 hours ago, iruvyouskyrine said:

Car is no good if the ECU can't be taken out, will give you $20k for it as is.

ahaha two hours ago when i was still struggling to get it out i would have accepted that 

1 hour ago, ActionDan said:

I did this job in my 34R, yours has been modified incorrectly - As those should be 10mm bolts. 

You will need to brute force those pop rivets/shear bolts? as gently as you can to not damage the underlying bracket. 

As mentioned, it would be much better to use something newer. I had decent results with Haltech plug in, but there's lots of options. Ideally something that removes the AFMs if possible. 

If that's not an option, choose your tuner carefully as PFC+AFM has been known to result in various drivability issues. Ideally only use it for lower power goal.

Good luck.

 

 

i live in perth any recommendations for a good tuner? i don't really have a power goal in mind i just want it to run smoothly on 98 and reduce the black soot on my poor white car

 

1 hour ago, r32-25t said:

There’s a few ways to get them out,

you can cut a slit through the middle and use a screw driver,

you can file 2 flats either side of the head and use vice grips to turn them 

or you can use a center punch and hammer to turn them 

Vice grips were the way to go, could slit it wide enough to crack the loctite

10 minutes ago, amrithd27 said:

just wanted something cheap to try stop it from running ridiculously rich on 98... currently get maybe 185ks out of a tank 

Sounds like a problem that could be either:

  • Faulty AFMs
  • Wrong Injectors installed
  • Stock O2s are rooted

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...