Jump to content
SAU Community

Recommended Posts

Hi guys building a r33 gtr was completely stock when purchased due to be completed within 2 weeks looking for a good tuner who does everyone recommend ? I’ve narrowed it down to birrong and Croydon open to others this is my  list mods include -9 turbos gtss x force dumps, tomei mainfold, hks front pipe, hks hard intake pipping kit, hks fuel rail, 800cc sard injectors,tomei fuel reg, Walbro 450l fuel pump, catch can, Apexi cat, tomei adjustable cams, haltech platinum pro ecu. I am chasing 330-350kw on pump fuel 98 I think this realistic I guess the turbos are the limiting factor here 

Link to comment
https://www.sau.com.au/forums/topic/477459-gtr-tuning-build-advise/
Share on other sites

3 hours ago, Chrisko33 said:

Hi guys building a r33 gtr was completely stock when purchased due to be completed within 2 weeks looking for a good tuner who does everyone recommend ? I’ve narrowed it down to birrong and Croydon open to others this is my  list mods include -9 turbos gtss x force dumps, tomei mainfold, hks front pipe, hks hard intake pipping kit, hks fuel rail, 800cc sard injectors,tomei fuel reg, Walbro 450l fuel pump, catch can, Apexi cat, tomei adjustable cams, haltech platinum pro ecu. I am chasing 330-350kw on pump fuel 98 I think this realistic I guess the turbos are the limiting factor here 

Is this the list you are thinking of getting or what is already installed?

2 hours ago, Leroy Peterson said:

Sounds like a solid wishlist from 2002 so probably already installed?

 

2 hours ago, KiwiRS4T said:

Is this the list you are thinking of getting or what is already installed?

It’s whats currently being installed at the mechanics at the moment, I know it’s a old school set up but I wanted to keep it low mount set up and twin turbo and I’ll be happy if it’s around near 350atkw 

  • Like 2

Internet rumours, anyhow that's personal preference.

With what you have you'll get a healthy 320 to 330kW, maybe a bit more depending how much timing your tuner puts in.

Replace that Jap crap cat with a venom 5" inch body one, more flow means more power and the ability for the motor to accept more timing.

The thing about old school setups with old school fuel and old school items is...

 

... they're tried and tested, and work. Even if they aren't the worlds greatest result, they work, and will continue to do so. 320kw bolt on package in a GTR is plenty to have fun with, day in, day out, enjoy car etc.

  • Like 1

Hey Mate,

I have a very similar setup as you as looking to have fitted up.  I've running twin HKS GTRS (dash 10's, which are super laggy) plus 1000cc injectors, platinum pro, HKS EVC, NISMO intercooler, E85 fuel lines, external surge with twin 404's, plasmaman fuel rail and Tomei pon cams and cam gear.

I probably wouldn't go the Tomei manifold unless it's the cast model.  The stainless has a tendency to crack (which mine has) and then can play around with startup idle from time to time.  Plus I don't think that there is actually that big a gain over the standard manifolds.

I've running duel mapping for 98 and E85.  On 98 I'm making 305RWKW (at 19psi) and on E85 405RWKW (at 27psi).  Since you're running the Platinum Pro it can't hurt to have both E85 and 98 maps setup anyway.  It's then your decision whether you use E85 or 98 but at least you have the option. 

All my tuning work has been done by Adam and the boys at JEM and I can't fault their workmanship and expertise when it came working on and tuning my GTR.  

 

The setup isn't for everyone's taste, as most on the response, however, I like you I wanted it setup similar to the way it would have been done back in the day. 

 

Where abouts in Sydney are you?

I've had multiple cars inspected, worked on, tuned and troubleshooted including my R34 with -9s and supporting mods on power FC at MRC in Seven Hills in western sydney and very happy with his work, feedback and attitude towards tuning.  Have been back several times for other mods and troubleshooting and am happy to have found a good one-stop-shop in Mark.

3 hours ago, BlueThirtyFour said:

Hey Mate,

I have a very similar setup as you as looking to have fitted up.  I've running twin HKS GTRS (dash 10's, which are super laggy) plus 1000cc injectors, platinum pro, HKS EVC, NISMO intercooler, E85 fuel lines, external surge with twin 404's, plasmaman fuel rail and Tomei pon cams and cam gear.

I probably wouldn't go the Tomei manifold unless it's the cast model.  The stainless has a tendency to crack (which mine has) and then can play around with startup idle from time to time.  Plus I don't think that there is actually that big a gain over the standard manifolds.

I've running duel mapping for 98 and E85.  On 98 I'm making 305RWKW (at 19psi) and on E85 405RWKW (at 27psi).  Since you're running the Platinum Pro it can't hurt to have both E85 and 98 maps setup anyway.  It's then your decision whether you use E85 or 98 but at least you have the option. 

All my tuning work has been done by Adam and the boys at JEM and I can't fault their workmanship and expertise when it came working on and tuning my GTR.  

 

The setup isn't for everyone's taste, as most on the response, however, I like you I wanted it setup similar to the way it would have been done back in the day. 

 

Hey mate thanks for sharing we have close setups, I’ve actually been doing a bit of reaserch on JEM they have very good reputation from what I can see Adam seems like a good guy and at this stage he the number one pick. Would you change to -9 if the -10 is that laggy ? I was very close to getting the -5 but after looking at reviews I wanted more responsiveness 

1 hour ago, JGTC said:

Where abouts in Sydney are you?

I've had multiple cars inspected, worked on, tuned and troubleshooted including my R34 with -9s and supporting mods on power FC at MRC in Seven Hills in western sydney and very happy with his work, feedback and attitude towards tuning.  Have been back several times for other mods and troubleshooting and am happy to have found a good one-stop-shop in Mark.

Ok I’ll probalby have a chat with them for sure what power did you get out of the -9? 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...