Jump to content
SAU Community

Recommended Posts

Hi guys building a r33 gtr was completely stock when purchased due to be completed within 2 weeks looking for a good tuner who does everyone recommend ? I’ve narrowed it down to birrong and Croydon open to others this is my  list mods include -9 turbos gtss x force dumps, tomei mainfold, hks front pipe, hks hard intake pipping kit, hks fuel rail, 800cc sard injectors,tomei fuel reg, Walbro 450l fuel pump, catch can, Apexi cat, tomei adjustable cams, haltech platinum pro ecu. I am chasing 330-350kw on pump fuel 98 I think this realistic I guess the turbos are the limiting factor here 

Link to comment
https://www.sau.com.au/forums/topic/477459-gtr-tuning-build-advise/
Share on other sites

3 hours ago, Chrisko33 said:

Hi guys building a r33 gtr was completely stock when purchased due to be completed within 2 weeks looking for a good tuner who does everyone recommend ? I’ve narrowed it down to birrong and Croydon open to others this is my  list mods include -9 turbos gtss x force dumps, tomei mainfold, hks front pipe, hks hard intake pipping kit, hks fuel rail, 800cc sard injectors,tomei fuel reg, Walbro 450l fuel pump, catch can, Apexi cat, tomei adjustable cams, haltech platinum pro ecu. I am chasing 330-350kw on pump fuel 98 I think this realistic I guess the turbos are the limiting factor here 

Is this the list you are thinking of getting or what is already installed?

2 hours ago, Leroy Peterson said:

Sounds like a solid wishlist from 2002 so probably already installed?

 

2 hours ago, KiwiRS4T said:

Is this the list you are thinking of getting or what is already installed?

It’s whats currently being installed at the mechanics at the moment, I know it’s a old school set up but I wanted to keep it low mount set up and twin turbo and I’ll be happy if it’s around near 350atkw 

  • Like 2

Internet rumours, anyhow that's personal preference.

With what you have you'll get a healthy 320 to 330kW, maybe a bit more depending how much timing your tuner puts in.

Replace that Jap crap cat with a venom 5" inch body one, more flow means more power and the ability for the motor to accept more timing.

The thing about old school setups with old school fuel and old school items is...

 

... they're tried and tested, and work. Even if they aren't the worlds greatest result, they work, and will continue to do so. 320kw bolt on package in a GTR is plenty to have fun with, day in, day out, enjoy car etc.

  • Like 1

Hey Mate,

I have a very similar setup as you as looking to have fitted up.  I've running twin HKS GTRS (dash 10's, which are super laggy) plus 1000cc injectors, platinum pro, HKS EVC, NISMO intercooler, E85 fuel lines, external surge with twin 404's, plasmaman fuel rail and Tomei pon cams and cam gear.

I probably wouldn't go the Tomei manifold unless it's the cast model.  The stainless has a tendency to crack (which mine has) and then can play around with startup idle from time to time.  Plus I don't think that there is actually that big a gain over the standard manifolds.

I've running duel mapping for 98 and E85.  On 98 I'm making 305RWKW (at 19psi) and on E85 405RWKW (at 27psi).  Since you're running the Platinum Pro it can't hurt to have both E85 and 98 maps setup anyway.  It's then your decision whether you use E85 or 98 but at least you have the option. 

All my tuning work has been done by Adam and the boys at JEM and I can't fault their workmanship and expertise when it came working on and tuning my GTR.  

 

The setup isn't for everyone's taste, as most on the response, however, I like you I wanted it setup similar to the way it would have been done back in the day. 

 

Where abouts in Sydney are you?

I've had multiple cars inspected, worked on, tuned and troubleshooted including my R34 with -9s and supporting mods on power FC at MRC in Seven Hills in western sydney and very happy with his work, feedback and attitude towards tuning.  Have been back several times for other mods and troubleshooting and am happy to have found a good one-stop-shop in Mark.

3 hours ago, BlueThirtyFour said:

Hey Mate,

I have a very similar setup as you as looking to have fitted up.  I've running twin HKS GTRS (dash 10's, which are super laggy) plus 1000cc injectors, platinum pro, HKS EVC, NISMO intercooler, E85 fuel lines, external surge with twin 404's, plasmaman fuel rail and Tomei pon cams and cam gear.

I probably wouldn't go the Tomei manifold unless it's the cast model.  The stainless has a tendency to crack (which mine has) and then can play around with startup idle from time to time.  Plus I don't think that there is actually that big a gain over the standard manifolds.

I've running duel mapping for 98 and E85.  On 98 I'm making 305RWKW (at 19psi) and on E85 405RWKW (at 27psi).  Since you're running the Platinum Pro it can't hurt to have both E85 and 98 maps setup anyway.  It's then your decision whether you use E85 or 98 but at least you have the option. 

All my tuning work has been done by Adam and the boys at JEM and I can't fault their workmanship and expertise when it came working on and tuning my GTR.  

 

The setup isn't for everyone's taste, as most on the response, however, I like you I wanted it setup similar to the way it would have been done back in the day. 

 

Hey mate thanks for sharing we have close setups, I’ve actually been doing a bit of reaserch on JEM they have very good reputation from what I can see Adam seems like a good guy and at this stage he the number one pick. Would you change to -9 if the -10 is that laggy ? I was very close to getting the -5 but after looking at reviews I wanted more responsiveness 

1 hour ago, JGTC said:

Where abouts in Sydney are you?

I've had multiple cars inspected, worked on, tuned and troubleshooted including my R34 with -9s and supporting mods on power FC at MRC in Seven Hills in western sydney and very happy with his work, feedback and attitude towards tuning.  Have been back several times for other mods and troubleshooting and am happy to have found a good one-stop-shop in Mark.

Ok I’ll probalby have a chat with them for sure what power did you get out of the -9? 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...