Jump to content
SAU Community

Recommended Posts

10 hours ago, TurboTapin said:

There's also another Australian company that makes R32 billet final drives. I can't remember the name though. 

Neat Gearboxes
https://www.neatgearboxes.com.au/

1 hour ago, GTSBoy said:

Neat Gearboxes

 

1 hour ago, robbo_rb180 said:

 

Yes, that's the one! Thanks. I remember going Speedtek over Neat due to the price but clearly it didn't pay off.

Fun fact, PRP started distributing Speedtek parts back in August. Now there's no mention of them anywhere on their site. I don't want to speculate but all I can say is it didn't take long for that partnership to go awry. 

  • Like 1
  • Haha 1
6 minutes ago, TurboTapin said:

Fun fact, PRP started distributing Speedtek parts back in August. Now there's no mention of them anywhere on their site. I don't want to speculate but all I can say is it didn't take long for that partnership to go awry. 

Wow you're right!

Google still shows it, but when you click on it, it takes you to empty pages.

Amazing.

Yes, well, this is going to be a perpetual problem for people in the civilised world who have a good idea for a product, but choose to get it made in China because you can't beat the price. The quality out of Chinese manufacture is so wildly variable that it is almost impossible to trust it. You might have the world's best quality out of production from Factory A, and you might have it for a year or two, but suddenly, and without warning, your production is moved to Factory B and you don't notice because mostly it's just as good as Factory A. But then the nightshift at Factory B suddenly goes wonky and 50% of your product starts to have bizarre quality problems. But you don't know about it until they start failing in service. If you're not doing quality inspection sampling at a statistically significant rate, you might grab samples only from the dayshift and they all look fine and you can't tell why you're getting failures. Then, maybe you raise your eyebrows to the company doing they manufacturing in China and they respond with "no problem here" while secretly making changes to the back end, and maybe your production goes back to Factory A for a couple of months (unlikely, because they've got some new guy's stuff being made there and he's still on the honeymoon), or maybe the sack the nightshift boss or maybe you get your production moved to Factory C because they suspect that you suspect that things have gone to shit and that you will pull your production contract from them and they start to care even less.

The only way to produce in China is to have your own people there, accountable to you and you only. And that can't happen if you're a small transmission specialist. Hell, my company is massively bigger than these gearbox/diff guys' businesses and we don't have the resources to run our own operation in China (nor anybody from here willing to go live there to oversee it!!).

9 minutes ago, Dose Pipe Sutututu said:

Wow you're right!

Google still shows it, but when you click on it, it takes you to empty pages.

Amazing.

If ever you want a good laugh, go read the comments on PRP's Facebook post about the partnership with Speedtek. 

  • Haha 1
24 minutes ago, TurboTapin said:

If ever you want a good laugh, go read the comments on PRP's Facebook post about the partnership with Speedtek. 

Got a link, I am keen for some morning entertainment

 

Bon took me a little while to figure out how to get a link from a Facebook post. Just to clarify the comments are on the original post about them partnering up with Speedtek. Not much love it seems. 

‼ NEW BRAND RELEASE ‼ We're thrilled... - Platinum Racing Products | Facebook

  • Like 1
  • 2 weeks later...

My assembler called today and it's confirmed the 2nd Speedtek pinion is in fact toast. He assembled it quickly with the 4.08 final drive to confirm. Worst news is Speedtek isn't answering my emails. I'll give it another few days and then start harassing them by phone. 

Good news, my diff should be ready this week. He just had to finalize a few things as he put it to the side for another urgent project (He seems to prioritize funny car/top fuel work). I'm also still waiting on the delivery of another 4.08 S13 LSD diff to take apart this winter to presumably toss in another 3.3-3.6 final drive by myself as to learn. I will not be repeating this experience again.

Aww Speedtek, how I'm unimpressed... 

Edited by TurboTapin
21 minutes ago, GTSBoy said:

Fixed your post for North American English.

In Quebec we call them "sac bananes". Banana bag in english lol

Edited by TurboTapin

If you get a gear set of Neat just be aware that they are a Gleeson cut and need to be setup differently. I know a guy who killed one of theirs in 10 laps because his diff shop set it up like a normal helical cut.

The guys at Neat are very helpful and will explain the differences.

2 hours ago, Komdotkom said:

If you get a gear set of Neat just be aware that they are a Gleeson cut and need to be setup differently. I know a guy who killed one of theirs in 10 laps because his diff shop set it up like a normal helical cut.

The guys at Neat are very helpful and will explain the differences.

Thanks for the heads up! I'll take a Gleeson cut over a Chinesium Cut that Speedtek uses all day everyday. Jokes aside, for transparency, Speedktek did finally respond and seems ok with a refund. I'll confirm once it's done. 

  • Like 3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Remember kids - if you can't afford to buy 2 GTRs......
    • I know people cry at the price of the Getrag 12-14k for a conversion now, but it really is a nice mid point. Not going to get change from 10k on a gearset installed.  $30k++ for sequential.   I know you run the risk of a damaged used one and parts are hard to get but as a street car gearbox its really hard to beat. If you enjoy a more traditional manual, its the choice no question.     
    • Time to decide what’s more import, your power level or your budget because you’re going to struggle to keep both 
    • Our Southern Highlands Cruise is proudly registered with “R U OK?” Day.  Sometimes the best way to check in on your mates is by getting out for a drive together. Sharing a common passion like cars creates the perfect space to chat, connect, and support each other.  A simple “R U OK?” can make all the difference. Let's enjoy the drive, the company, and look out for one another. PLEASE WEAR YELLOW FOR “R U OK?” DAY Sunday 14th September 2025 9:30AM Meeting Crossroads Homemaker Centre 10:00AM Cruise Departure Via Old Hume Hwy 11:45AM Arrival at Mittagong RSL Club Meet Location: Crossroads Homemaker Centre Final Destination: Mittagong RSL Club *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yep, its been down for a while, as I understand it it will be back soon.
×
×
  • Create New...