Jump to content
SAU Community

Recommended Posts

I was an idiot today and I drove through water on this road section, I didn't have much room to go around, and as I got into it my car did lose a bit of power but after that it was fine and got home without any problems, car drove as normal.I thought my snorkel was on the top but it seems like it isn't. My car is a 2001 subaru impreza N/A? I was going to check the air filter tomorrow to see that it didn't go into the engine, and make sure my oil isn't murky. Is there anything else I need to consider? I did think about taking out spark plugs except if the oil looks clean then there shouldn't be water in the combustion chamber, and especially since I drove home without any problems after the water.

Edited by silviaz
Link to comment
https://www.sau.com.au/forums/topic/483394-so-i-drove-through-water/
Share on other sites

On 3/2/2022 at 9:16 PM, niZmO_Man said:

if it still runs like it did before you entered the water, you'll be fine.
maybe check the air filter as you said and replace it if it's soggy

Yeah it did, no issues. Will check tomorrow morning, really don't want all those years of looking after my engine to be wiped out in 5 minutes by my own stupidity, haha.

Oh man I would have been so worried that I'd broken something.

Good to hear it's still running and like the others said hopefully it's fine.

It wouldn't surprise me if some water did get in and simply burned away which is why you lost some power but not enough to lock it up.

 

On 02/03/2022 at 9:47 PM, niZmO_Man said:

hey if the engine breaks, grab a build EJ207 from All Drive Subaru hehe

All Imprezas are AWD, not just WRXs, that Subaru's thing.

Worst thing to worry about is in a couple of years time your axle splines will be welded to the hubs and you'll never be able to remove them if required - ever.

ive completely hydro locked 2 engines offroading both toyota 3.0 v6 engines that came in the pickup. pulled the plugs and cranked till all the water came out and the engines and they both came back around.  your motor is fine i wouldn't stress, change the  oil, change the air filter, keep on keeping on mate.

On 03/03/2022 at 12:04 AM, BK said:

All Imprezas are AWD, not just WRXs, that Subaru's thing.

Worst thing to worry about is in a couple of years time your axle splines will be welded to the hubs and you'll never be able to remove them if required - ever.

err off topic but, https://www.alldrivesubaroo.com.au/

I spelt 'Subaroo' wrong, but I know about Subarus heh (had a gen5 GT Liberty/Legacy manual wagon, miss that car) and my brother has a VA1 STI (my dad also has previous gen Outback). My mate built is GV STi engine at aforementioned workshop (makes 380 kW and is scary fast).

On 03/03/2022 at 8:57 AM, niZmO_Man said:

err off topic but, https://www.alldrivesubaroo.com.au/

I spelt 'Subaroo' wrong, but I know about Subarus heh (had a gen5 GT Liberty/Legacy manual wagon, miss that car) and my brother has a VA1 STI (my dad also has previous gen Outback). My mate built is GV STi engine at aforementioned workshop (makes 380 kW and is scary fast).

Have 2 WRXs myself and they are great. 2001 GDA WRX and the 2015 VAG WRX with the FA20, both in blue of course.

WP_20160915_001.thumb.jpg.c914c608840ba0a61574e1c4b015c612.jpg

The FA20 turbo is brilliant and a quantum leap over the EJ. Not quite sold on the 2022 version though.

On 3/2/2022 at 4:14 PM, BK said:

Have 2 WRXs myself and they are great. 2001 GDA WRX and the 2015 VAG WRX with the FA20, both in blue of course.

WP_20160915_001.thumb.jpg.c914c608840ba0a61574e1c4b015c612.jpg

The FA20 turbo is brilliant and a quantum leap over the EJ. Not quite sold on the 2022 version though.

AFAIK the FA24DIT is tuned a lot better from the factory, putting aside the other questionable decisions. I still don't understand why Subaru insists on shipping cars with such questionable tunes from the factory. It's fixable, but it just seems wrong to void a warranty just to linearize the torque vs accel pedal input curve.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
×
×
  • Create New...