Jump to content
SAU Community

Recommended Posts

Hallo,

Yes I have a stupid RB that spits power steering belts when I smash the limiter at 8600rpm, clearly at a RPM Nissan engineers never envisaged a pleb spec RB25 would reach. RB26 motors don't seem to spit belts as often as they run a 4 rib belt, where as a R33 RB25 uses a 3 rib (I moved all my R33 ancillaries onto the R34 RB25 NEO motor).

I know there are options such as deleting the power steering setup altogether or running one of those FPG power steering replacement kits (very sexual) but I'm not keen on either option - mainly due to effort required & cost.

I can't recall when Ross released their power steering idler kit - however it might just be the solution I'm after. It essentially just adds an idler on the power steering bent to stop the silly deflection at high RPM. In theory it seems to make sense and "should" stop power steering belts spitting off when I smash the limiter OR just rev out the car at high RPM.

I'm more so keen on:

  • thoughts, if this will actually solve my problem or just a pretty looking engine ornament (stares virtually at @GTSBoy)
  • actual installs of it, I can't seem to find any installed photos of it on the web
  • Is it actually worth the $370 or so

Nissan RB Power Steering Idler Kit – performanceheaven

Nissan RB Power Steering Idler Assembly | Ross Performance

 

Thanks everyone!

(Yeah finding new ways to waste money, I've turned into @The Bogan)

 

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/484333-ross-power-steering-idler-kit/
Share on other sites

5 minutes ago, Dose Pipe Sutututu said:

It doesn't seem to be a popular item, hence I was curious on feedback

Guess I'll order it soon, hopefully have it sorted before All Jap Day in May.

I guess it's one of those things that doesn't happen to everyone but it isn't unheard of either.

Never personally had a problem with any of the 26s doing it but if it ever happens it'll be the first thing I'd fit.

  • Like 1
6 minutes ago, BK said:

Never personally had a problem with any of the 26s

You have a lower chance of the belt exiting off the pump as it's a 4 rib, for whatever reason Nissan decided to go to a 3 rib on the R33 GTS-t, but then back to the 4 rib on the R34 GT-t.

Maybe then decided to use a 3 rib pump to pay homage to R-3-3 LOL...

  • 4 weeks later...

Let's see if it actually does anything!

Another option is to just decrease my limiter but that also means I would need to grab 5th gear down the straight, not too keen on that.

I like to kiss the limiter in 4th and be ready to coast then ease on the brakes.

 

PXL_20230202_013652329.jpg

  • Like 1

Installed, haven't started or run the car yet.

Will do so once I've dropped/changed the oil, spanner/bolt check on everything on it.

Ignore the oil mist, it was from the last event when I ran the car without a seal on the oil cap. I thought the cap was a bit loose, but never really clicked.

The kit looks/feels quite good too, just fitting it with the factory fan & shroud in place was a bit fun. I dabbed a bit of loctite on everything too.

 

PXL_20230207_032447467.jpg

PXL_20230207_032430409.jpg

PXL_20230207_032420956.jpg

  • Like 4
31 minutes ago, GTSBoy said:

Just do a long smoky burnout on the street. Cheaper and easier than breaking it at track and just as good for testing the idler and the gearbox.

Bonus, if you get it confiscated, then you can stop bitching about it.

soz to break it to you, I'm not a roll racer or drag racer. 

I really need to find a new hobby that doesn't involve this car and spending money.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...