Jump to content
SAU Community

Recommended Posts

I'm replacing the front tyres on the E39 tomorrow because one of them has a few gouges out of it. There is so much tread still on them but they're also 9 years old and the rubber is super hard. 

This falls within the guidelines of 10 years old that I've read which surprises me given their condition. 

I'm curious about whether you guys care about tyre age or just judge the tyre based on condition? How old would you consider too old?

Link to comment
https://www.sau.com.au/forums/topic/486127-how-old-is-too-old-for-tyres/
Share on other sites

Personally I wouldn't put tyres over 4 or 5 years old on any of my own cars. Once they go hard the grip characteristics completely change. As per most things it only matters in an accident and that's when you most want them to do their job!

  • Like 2

Yeah - 4 or 5 years is the limit for decent tyres.

Pedestrian grade tyres with 400 TW ratings start out hard and don't start to suffer until they are somewhat older again. But the stickier decent stuff? Nup. My current ADO9s are < 2 yrs old, 17000km in, only have about the minimum 2mm of tread depth left, and they are.....not what they used to be. They are clearly much harder now than when new. Whether that is heat cycles (unlikely, for a road tyre), different compound between top and bottom of tread, or actually aging out (in less than 2 years!!!) is not really able to be discerned. But I'd credit actual aging as being at least part of the cause.

I've got an old pair of ~50% worn AD08Rs in the shed that I really need to get rid of. They started feeling waaaay too hard to put back on the car after a couple of years sitting there.

  • Like 1

Also, a tip for young players 

Check the dates on new tyres before they fit them, I always ask this question at the tyre shop, as they have tried to put "new" tyres on one of my cars a few years ago, but the build date was about 3 years old

  • Like 1

If the tyres were fitted when new, I wouldn't expect much over 5 years of use. Especially if the car lives outside full time. 

If the tyres had been stored under ideal conditions and are being purchased new, I'd fit a set of already 5 year old tyres if I only expected to get 1 to 2 years of use out of them. 

I've purchased many a set of new (but quite old) tyres from St George Tyres when I just needed some decent rear tyres to drift on. 

Here is a pretty crazy example, can't say I've ever bought 11 year old tyres from them before though lol. 

https://www.stgeorgetyres.com.au/momo-tyres-245-45-17-outrun-m3-official-product-by-momo-italy.html

  • Haha 2
21 hours ago, PranK said:

I'm replacing the front tyres on the E39 tomorrow because one of them has a few gouges out of it. There is so much tread still on them but they're also 9 years old and the rubber is super hard. 

This falls within the guidelines of 10 years old that I've read which surprises me given their condition. 

I'm curious about whether you guys care about tyre age or just judge the tyre based on condition? How old would you consider too old?

10 years is really pushing it. At 7-8 years you need to inspect frequently for signs of dry rot.

1 hour ago, joshuaho96 said:

10 years is really pushing it. At 7-8 years you need to inspect frequently for signs of dry rot.

I've got 15 year old tyres on a car in my garage, holding air (holding it better than the daily driver does!) and no signs of rotting/cracking/drying out. Oh, and they've only been garaged the last 3. Before that they sat in a couple of different paddocks/yards, and even spent about a week underwater too.

However, weather and other environmental factors can really change how quickly they start to dry out and crack.

My understanding is that UV tends to accelerate the aging process. If the car has been garaged, then you could probably get away with extending beyond 10 years.

FWIW, in 2015, I had tyres on my 180B SSS that had a 3-digit code (2 for week, 1 for decade), ending in 0, so could have been more than 30 years old, but still worked fine. I did replaced them very quickly, though, once I discovered what the code meant!

Ok got some old tyres for you guys...my car has been sitting around un-driven for about 6 years now.

I had it on the original rims with the shitty compliance tyres it got it with back in 2006, which were manufactured in 2004...

Sidewalls eventually rotted and split open, obviously no air in them and the rims were holding the car up.

Just swapped them with some 17" Work rims and tyres which are probably 10+ years old too but at least holding air

IMG_20250222_165543.jpg

IMG_20250222_165617.jpg

IMG_20250222_174409~2.jpg

  • Like 1
  • Haha 1
1 hour ago, Ozdavroz said:

Ok got some old tyres for you guys...my car has been sitting around un-driven for about 6 years now.

I had it on the original rims with the shitty compliance tyres it got it with back in 2006, which were manufactured in 2004...

Sidewalls eventually rotted and split open, obviously no air in them and the rims were holding the car up.

Just swapped them with some 17" Work rims and tyres which are probably 10+ years old too but at least holding air

IMG_20250222_165543.jpg

IMG_20250222_165617.jpg

IMG_20250222_174409~2.jpg

I am now intrigued to go check the dates on the tyres on my Skyline...

We need a game of who has the oldest tyre still holding a car up, and successfully holding air (for longer than a 2 weeks I feel is successful air holding).

 

I feel your tyres may be beating mine :(

2 hours ago, Ozdavroz said:

Ok got some old tyres for you guys...my car has been sitting around un-driven for about 6 years now.

I had it on the original rims with the shitty compliance tyres it got it with back in 2006, which were manufactured in 2004...

Sidewalls eventually rotted and split open, obviously no air in them and the rims were holding the car up.

Just swapped them with some 17" Work rims and tyres which are probably 10+ years old too but at least holding air

IMG_20250222_165543.jpg

IMG_20250222_165617.jpg

IMG_20250222_174409~2.jpg

Went looking at mine, reading off the tyre, presumably these are 1st week of 2003. Still hold air (I haven't had to pump them up in over 12 months!)

 

PXL_20250222_103140228.thumb.jpg.b69a72861d9be2acef7880f8d53a73c5.jpgPXL_20250222_103349285.thumb.jpg.effffed8b1e7ef751183223cb8c3e392.jpgPXL_20250222_103357847.thumb.jpg.6ae9c122892af223103c9e18656b97c9.jpg

 

I couldn't quickly find the date on the front tyres, they were fitted around 2008 to the rims, so probably not quite as old, but they have a lot more dry rot cracks in them. Still hold air. :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Mixing things up - installed some leather recaros to match the leather seat covered rear seats. Interior looks pretty schmick now except for some slight wear on the steering wheel which I will monitor and address if it becomes worse or actually noticeable!  
    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
×
×
  • Create New...