Jump to content
SAU Community

Recommended Posts

Used for the past two years:

Potenza GIII 255/40ZR17

Dunlop FM901 235/45ZR17

Rate both sets of tyres, the GIIIs are quite grippy and provide excellent traction in both wet and dry, whilst the FM901s are very predictable with good feedback.

Does anyone know if the FM901 successors- Direzza DZ101 - are available in a similar size? I can't seem to find anyone who stocks them locally, and I'd love to try them out.

Failing that I will be running Goodyear Eagle F1 GS-D3 on the front. They've received good reviews (eg Motor magazine) and several friends have them and rate them quite well, incl on the track too.

Just some info on maxxis for anyone who's interested.

Maxxis are a rubber technology company that have been in the bicycle tyre market for a fair while, they actually sponsor Steve Larsen who is ranked no. 1 in the US for cross country cycling. Their HQ is in the U.S.

They've only started braching out into car tyres in the last few years, hence the price. Their car tyres are manufactured in taiwan.

I've got victra 235/40 r17 on the front and victra 255/40 r17 on the back of my line and they're fantastic for the price.

anyway, just thought i'd put in my 2 bobs worth.

Edited by Ol_Mate

All,

This is a very interesting and long topic.

I am looking for new tyres now and narrowed it down to 2.

1. Pirelli pzero nero's

2. Yokohama AVS V102's

Any body used these tyres?

Prices arnt too bad either!

im running DUNLOP SP3000A`s there GReat for a standard GTS-t grip really well in dry and wet but have slipped then in the wet ...

Once u get more power there not as good but other than that there good for the lowwer power cars..

BUT my shocks r gone so it could be them not the tyres...

IT sounda like the TOYO T1R`s R the way to go ...?

From what I was told by some tyre shops, the Dunlop SP Sport 3000A is an average tyre. Probably 5.5 to 6/10 for overall performance. But it's not very expensive and it's made in Oz.

since they wieght of all skylines are in the 1300 - 1600kg range I reckon the recommendations are pretty relevant.  Suspension mods make much more difference to tyre performance that power.

Unless you mean rear traction problems out of big power cars? 

Either way, if you buy a sports car, modified or not, buy the best tyres you can afford for it, they make more difference to performance than any other mod.

I mean traction ,handling,and braking nproblems with 2 and 4 wheel drive cars.

I have Potenza S-03's on my car (R34 17" GTT rims)

R33 gtst, with basic intake/exhaust mods, and still original suspension with around 90k on the clock.

They're quite expensive I suppose, to a fair few other tyres out there, but they grip pretty darn well in the dry, probably let more down in the rain, although its not hard to tell why when you look at the tread pattern.

I'm not sure if i'll buy them again, they're wearing quite well, and they have next to no road noise compared to other tyres I've had on (Goodyear eagle F1's)

  • 2 weeks later...

using some sumitomo htz or something like that - 215/40/17 ...... only been using them for the last couple of days cos i just changed my rims and they came with....

before that was using nexan not sure which ones 225/50/16 fronts and 225/50/16 kuhmo ecsta bot weren't too bad the kuhmos were a bit worn out they came with the car when i got it

Here are the tyres I have had experience with;

326's

I don't really need to comment. Standard magna 195 rubber was better than 326's in 235. You could easily break 3rd gear (it was manual) in the wet...... Redefine scary torque steer.

Firenza's

195/50/15

These were on a mirage that saw a LOT of track work. We went through 2 sets.

Dry: 6/10

Wet: 6/10

If you have to buy cheap tyres get these.

These are a really impressive tyre and on the track they would last 5-6 laps before over heating but that said the car is light. From the feedback I have heard, on bigger cars they have less grip than the likes of s03's as you would expect but everyone agrees that they are incredibly predictable and provide plenty of feedback. I just had a report from my dad who has an my03 and reports the same thing. (i told him not to buy tight arse tyres for the rex but he wouldn't listen)

Goodyear Eagle F1's

195/50/15

Dry: 5/10

Wet: 6/10

I didn't rate these as much as the firenza's surprisingly.

Falken Azenis ST115

225/45/17

Dry: 7/10

Wet: 9/10

These were on my 99 wrx and these saw track work and 20,000km of daily driving and I loved them. They were predictable and the sidewalls were stiff.

Dunlop SP9000

205/55/16

Dry: 3/10

Wet: 4/10

These are on my current s15 on the standard wheels and I HATE them with a passion. There is hardly any grip and the sidewall is soooo soft. There is almost no feedback at all and probably due to the profile they are very slow to react.

I would go as far as to say that the Simex (or whatever they are) that the car came with were better.

Maybe Duncan they are better in a lower profile and with extra width but I just cant speak strongly enough about how bad they are.... I can't wait to destroy them at the track in a couple of weeks :D

It may be that I liked the st115's just because I had a wide tyre on a rex which has so much grip anyway but I would buy them again at the right price.

James

ROADSTONE DH-55

Dry - 7/10

Wet - 2/10

Value For $ - Didnt buy them, came with the car :)

Probably the worst wheels ever. The tyreson my gf's beat up '87 magna are probably better. In the wet they tend to spin a lot and i start drifting around corners alot! Spun out twice.

Goodyear Eagles

Dry - 4

Wet - 0 - these tires are absolutely dangerous. it's nearly impossible to steer with them on the front in the wet. i was running 205/65/r15's. they're not even fit for daily driving.

Well, Just got new tyres yesterday

Tyres that came with the car Nankang EX505's 225/50 R16

Dry 5/10

Wet 2/10

Value ??

These were crap. They would understeer at around 2km/h round a bouts, getting the rear out was EASSY. Did a hill run though, they were OK for that. 60km/h at a 45 degree turn, i would start to understeer...and my cars pretty well balanced (ie doesnt tend to do either under or oversteer)

New tyres

Hankook K104's in 225/45/17

Ill keep everyone posted, so far they are much better.

hey nfi was it these tyres?

fs_sp_sport_9000.jpg

because they are some of the best road tyres I have used!  We'll have to go for a spin sometime to compare :rofl:

Hmmm... the Dunlop SP Sport 9000 is supposed to be Dunlop's best tyre in it's road range

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
×
×
  • Create New...