Jump to content
SAU Community

Recommended Posts

1992 R32 gtst

Wheel dia= 17"

Wheel width=8" fronts 9" rear

Wheel offset 35 fronts 38 rears

tyres 235-45-17 front

tyres 255-40-17 rear

Didnt need to do any mods car was lowered 25mm

1993 R32 gtst

Wheel dia 18"

Wheel width 7.5" front 8.5" rear

Wheel offset 30 front 40 rear

Tyres 235-40-18 all round

no mods needed to fit car was lowered 50mm

  • 3 weeks later...
  • 2 weeks later...
I am buying a set of VOLK GT-C's in 18x10 but cant decide on either the +12 or the +17 fitting?

The car is a R33 GTR.

Can anyone here please suggest me which way to go.

Id go the +17 option. It will sit 0mm closer to the strut (standard inner clearance) and extend 26mm on the outside

The +12 will sit 5mm further away from the strut on the inside, and will sit 31mm further toward the guards. The whole wheel will be further out from the strut, plus the extra 1" rim width.

The +12 may give you scrub problems depending on how low or depend on the camber of your suspension setup. I have 18x10 +18 Work wheels with Tein coilovers and have never had any dramas with clearance etc.

Hope this helps... By the way GT-C's will look awesome :glare:

  • Like 1
  • 2 weeks later...

Hey just a quick question guys/girls... Do commodore stocko's fit on a R33...

Cos i got 8 of them sitting in my garage off my old mans old VN and yeh cant really be bothered to see if one fits but if someone is sure they do then u could just possibly of made my weekend :(

Please please please *fingers crossed above head eyes closed*

  • 2 weeks later...

Tried using the calculator that some of the guys has posted on this string but I have no idea what the stock offsets are for the R33 GTS-T Series 1. All I know is that they are 16 x 6.5 and they use 205/55 R16 or 225/50 R16 tyres. Someone help me out here?

Looking to get some Rays Volk TE37L and I just want to make sure the buggers fit. I think R33 GTS-Ts have 5 stud so I am going to have to rule out the 8inch there.

If they do comfortably, then SOLD! Just gotta find a place that sells them.

***MODIFIED***

Thanks n15m0. I thought its better to modify my post instead of just adding another post saying thanks.

Edited by Ride417

Hey guys,

I have been reading about wheels offsets as i am about to buy a new set of 18' Rays Ce28n's for a R33 GTST and have been recommended the following widths and offsets

18x8.5 +30 fronts

18x9.5 +34 rears

What are these going to fit like. Would the look any good in that offset. And would they have much dish on the rear?

What offsets would people recommend?

Any help would be appreciated!!

Cheers

Alan

post-16969-1168167280.jpg

Edited by al_r33
Thanks for that n15m0,

How about these wheels will they fit on easy without any mods?

RAYS Nismo LMGT-4

18 x 8.5 +30

18 x 9.5 +38

Thanks for the help

Cheers

I'm reluctant to answer you as I myself am looking at getting tht particular set :D

But since I'm a nice guy...yeah it should fit without any dramas. :/

hey peps, just got a set of super advans 2nd hand

they are 17 by 8 and 9's, not too sure of the offset but they fit really nice, but i gotta lip/flare the guards.

is it possible to lip them without respraying? and what should i pay, or were should i go to get it done melbourne?

First of all, please forgive my ignorance. I am new to this site and found it to be a great Forum and has great people!

This is a great thread and i've just gone through to read all the pages. Lots of info in there. However, not many people have posted offsets on a R34 GTT. I've got a question as per the person posted before me. Can a 18x9.5 +30 wheel fit onto my R34 GTT seriesII? My car is stock with standard wheels and suspension. I am looking at changing my wheels to one of the BEE-R/Nismo LM types.

With this settings, will I have any clearance/rubbing problems? even with full turns?

Lastly, has anyone heard about Rota wheels and where to get them in Australia? Thank you all in advance! Keep it coming! Cheers,Michael

bump, exact same interest in this :D

EDIT:

18x9.5 +25mm offset

18x9.5 +38mm offset

That is how 18x9.5 +30 will sit on the rear of a 34...sticks out bout 5-10mm...but with lowering a bit of camber and stretched 235s on there I reckon it will just fit with slight lipping needed...

Ideally you would want to get 18x9.5 +35.

post-6973-1169545140.jpg

car wouldn't be lowered, or ever so slightly.

would adjustable sway bars, front and rear help at all?

so the lower the offest number, the further it sticks out? So the +38's would go up front and +25's the rear?

i'd be thinking 265 the rear tyres, at least 255.

someone previously mentioned removing the inner guards??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...