Jump to content
SAU Community

Recommended Posts

im sorry but did we go over how to seperate the side-blinkers also? i have the clear ones and ofcourse i want those to match black also...

do i do it the same way... with heat and such?

im sorry but did we go over how to seperate the side-blinkers also? i have the clear ones and ofcourse i want those to match black also...

do i do it the same way... with heat and such?

What i want to know is how the hell can they charge $450 for a set of full clear R32 blinkers

like them=

post-14512-1155446179.jpg

And i know their is a place somewere hidden in japan that can make th full clear plastics for the winkers, EVEN the orange curb marker built into the winker plastic!

like this-=

post-14512-1155446018.jpg

The only question is WHO makes them!!!! then we can all change them over to CLEAR with no gay little orange curb light,

:thumbsup:

anybody seen the headlights on yahoo auction japan. the ones that are all mesh with a small round light in the corner... ill try to find a pic... found it..

bl2451-img500x375-1155803770r32_2.jpg

bl2451-img500x462-1155803765r32_1.jpg

guess i should ask does anybody have them, and have a better pic?

Do you think it will be good if we only replace the stock projector with an hid projector?

So i will keep the stock h3c bowl and put an hid cutoff shield with an hid projector.

Then, buying an hid h3c bulb kit.

is that a good? i'm just thinking that it will be easier, but i'm not sure how the h3c hid kit will light up.

  • 2 weeks later...
  • 2 weeks later...

i'm doing the same retrofit, but i'm using the e46 projector.

i have the same problem as you, the projector are smaller in lenght. So i will have to cut the back, in order to fit the ballast adapter wire to the bulb.

i got my over cooked ones out, and fitted a fresh set of headlights, and decked them out with blue angel eyes,! looks nice i think!

If anyone wants to get a set of angel eyes, be sure not to get squid rings, or LED eyes... they suck

They cost me about $170 and 2hours of fitting! but look trick!

post-14512-1158749915.jpg

i started my retrofit using E46 projector. They are very similar to the honda euro.

here are some pics.

e46 projector

IMG_1496.jpg

e46 projector with the bracket

IMG_1498.jpg

IMG_1499.jpg

IMG_1500.jpg

fitted inside the headlight

IMG_1497.jpg

IMG_1492.jpg

Back of the headlight.

IMG_1495.jpg

IMG_1493.jpg

now i will have to screw the projector to the bracket and use soem jb weld.

Then cut the back of the headlight, so i can fit the bulb adapter

i got my over cooked ones out, and fitted a fresh set of headlights, and decked them out with blue angel eyes,! looks nice i think!

If anyone wants to get a set of angel eyes, be sure not to get squid rings, or LED eyes... they suck

They cost me about $170 and 2hours of fitting! but look trick!

I am looking to get some, where did you get em from and can you get like other colours??

Sir D, I totally agree with you on that one. for some reason, nissan feels that the reflectors are better than projectors. For halogen lighting, they might very well be right.

All the r32s/s14/s13 with the projectors have absolutely shit light output. The r33 reflectors actually have pretty good light output compared to the r32 ones.

PS: My gtr lights are almost here. woohhooo. then comes the hardbit - trying to fit them. I might have an excuse to get gtr front bar, bonnet and possibly even guards just to fit these lights on.

lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Are you suggesting that the kit did a cheap and nasty job of just jamming the wheel in between other things and caused the misalignment? I mean, we normally do this with an integrated crank trigger wheel, not something bodged on. It's not 1995 any more.
    • I mean, given the number of BMWs you own their tolerance for improper torque is rather low. The number of torque + angle spec bolts and non-reusable bolts in one is nuts.
    • Atmospheric vent requires something that doesn't use a MAF for load. You would need a standalone ECU for that.
    • Hey all,   I’ve got an RB25 with a trigger kit that includes a crank wheel, and I’ve hit a wall trying to sort a timing belt tracking issue. The belt either rides right on the edge of the cam/crank pulleys or walks slightly forward once the engine starts. It tracks okay-ish for a moment, then creeps right to the edge—and honestly, it’s stressing me out.   I’ve spent hours removing and reinstalling the belt, double-checking everything:   Tensioner setup is good, checked multiple times Idler pulley and washers are all in the correct places Followed the RB25 timing procedure step-by-step     The only thing I changed was the rear crank washer—I swapped the OEM one for a Neato version, and it made things worse. The belt now sits even more forward than before. I’m beginning to think the crank trigger wheel itself (from the trigger kit) is the issue—poor design or slightly off dimensions.   What’s strange is that with the previous belt setup, it actually ran fine for a couple of years—around 4,000 to 5,000 miles, even with hard driving and high RPMs. But even then, the belt was always riding right on the edge, and I know that’s not ideal or safe long term.   At this point, I’m debating whether to:   Machine a few mm off the crank trigger wheel to bring it back in line, or Replace it entirely with a better-designed unit     Only thing is, I already have the Cherry Hall sensors, bracket, etc.—I just want to replace the wheel only, not the entire kit. Anyone know a brand or supplier that sells just the crank trigger wheel on its own?   Would really appreciate any feedback—especially from anyone who’s run into this exact issue and found a reliable fix.   Thanks in advance.
    • Hi...a little refresh. Is Nistune gonna be enough to run BoV? Or do i need some proper ECU? 
×
×
  • Create New...