Jump to content
SAU Community

Recommended Posts

  • 1 month later...

Here is my result only running 8psi for run in tune. Motor is a 2630 forged bottom end, built head fully ported oversize valves ect. Running a forced performance super 94 with 1.14 exhaust housing on 6boost t4 twin scroll 4" exhaust also haltech plug-in pro on e85

20160831_173822.jpg

  • Like 2
ImageUploadedBySAU Community1405245838.185875.jpg

140000km bottom end

N1 oil pump

Std rb25det head with internal vct mod

850cc injectors

Greedy copy inlet manifold

Hybrid exhaust manifold

Precision turbo intercooler

Gtx3076r .82 rear with tial 44 mm gate of the snail

Eboost street

16psi 285kw through an auto with cam issues. Time for an adjustable exhaust wheel to see what happens


e4346d19286ef53e7babf4d51f8333ab.jpg
Retune with gtx3582 at 23psi
  • Like 2

 

Spool and CP bottom end with extended crank collar and billet gear pump

R33 S2 head with Tomei 256° cams and internal VCT mod

RIPS intake, 6Boost mani, 50mm gate and ProBoost GTX35 (.82 rear)

A1000 pump, 1200 FPR, 1200cc injectors

Haltech plugin with 3bar MAP, Air temp and Wideband

LS2 coilpacks

Running 98 for the moment

WP_20160808_19_58_31_Rich.jpg

WP_20160808_19_59_25_Rich.jpg

  • Like 2
  • 3 weeks later...
  • 1 month later...

What power would i be making roughly ?

rb30 standard block

rb25 head 262 cams 

fully forged internals

gtr3788r turbo 40mm gate

1000cc injectors

twin 044 bosch fuel pumps

front mount 

turbo back 4 inch dump to 3.5 

ffp and all other small mods 

 

Edited by ncrdbl
more to add
14 hours ago, ncrdbl said:

What power would i be making roughly ?

Dude, this is the COMPLETE OPPOSITE of results.  This is for sharing results, not asking what it should make.  Get it tuned, share the result and then we'll all know the answer :)   If you want to discuss the setup or how well its matched or should perform, start a suitable thread.

  • 3 weeks later...

Hi all...recently tuned my; 

Vl turbo with RB30/25 neo head

- Built bottom end - forged pistons, rods, N1 oil pump, studs 

- Ported head- type B tomei poncams, 

- Front mount intercooler 

- Forward facing plenum

- 2 x 044 fuel pumps

- 6 boost manifold 

- GTX 3582

- Bosch injectors 2000's

I have been building this car for years which has been an ongoing project/hobby... it's a 5 speed manual, running 24 psi on e 85. 

 

 

 

Screenshot_2016-12-09-23-06-12.jpg

  • Like 3
18 hours ago, Rb30/25 said:

Hi all...recently tuned my; 

Vl turbo with RB30/25 neo head

- Built bottom end - forged pistons, rods, N1 oil pump, studs 

- Ported head- type B tomei poncams, 

- Front mount intercooler 

- Forward facing plenum

- 2 x 044 fuel pumps

- 6 boost manifold 

- GTX 3582

- Bosch injectors 2000's

I have been building this car for years which has been an ongoing project/hobby... it's a 5 speed manual, running 24 psi on e 85. 

 

 

 

Screenshot_2016-12-09-23-06-12.jpg

What comp ratio as this buid is almost exactly the same as mine. i have 1000cc injectors thats all that is different and ecu.

I have 9:1 compression and microtech....the combo works well

3 hours ago, lcxu105 said:

What comp ratio as this buid is almost exactly the same as mine. i have 1000cc injectors thats all that is different and ecu.

  • 2 months later...

Not sure why I never got around to posting in here since I've had an RB30 in the stagea for 8 years now....just got it back from Unigroup after they sorted an exhaust restriction so I thought it was time to post up

This is from my rb30 stagea

* Rb30 bottom end with forged pistons and rods

* Standard stagea head

* eboost 2 @ 19psi high boost

* Garret GT35R with 0.63 housing (the baby one)...I think!

* Generic front facing plenum and stainless high mount manifolds

* Larger injectors but stuffed if I know what size or brand.

It makes 200awkw @ 4000rpm and 250@6250 with 19psi. Comes on nice and early which is what I was after.

stagea-dyno-2016.jpg

  • 1 month later...

GTX3584RS 1.01

26psi

Max of 7800rpm

 

There is more in it but decided to leave it there for reliability and longevity. I have no doubt 30-32psi would deliver 560-570kW, possibly more.

 

Made 421kW at about 19psi - lazy curve whilst setting up boost control, so 10psi slowly creeping up to 19ish

 

IMG_8080.JPG.e96f6811e1ba4f82eb844b9502afefc0.JPG

 

  • Like 2
  • 1 month later...

RB3025 Neo

-260deg 9.15 poncams                     - GT3076 0.82rear with 44mm tial, 3 1/2 inch exhaust, 100 cell cat, Sinco topmount                                    - walbro 416l/ph , 1000cc x spurts   - p fc, AVC-R , E85

- Injectors at 85%, pump almost maxed plus other parts at limit, maybe a play with cam gears later but it pulls hard already.

 

         

 

                                                                                             

20170526_221840.jpg

 

Edited by AngryRB
  • Like 1
  • 2 weeks later...

Worked on the boost control set-up, added 1psi in the mid range, and a bit more (1-2degrees) timing up top.

Dyno overlay isn't 100% accurate but it's close enough

Results:

IMG_8573.JPG

  • Like 1
  • 2 months later...

R33 series 2

Head: Rb25de (r32) with Rb26 springs still stock cams

Block: stock o-ringed rb30de with new rings and bearings 

Turbo:garret GT3082 .82A/R exhaust housing 

ECU: microtech lt10s

Fuel: E85

stock exhaust manifold modded to fit external gate

1200cc injectors

custom inlet plenum

290ish kw @ 18psi with 799nm

funny enough made the same peak power on the same boost with this turbo on my rb25det with poncams and pump fuel

This setup has a heap more low/mid range but

 

 

dyno.jpg

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...