Jump to content
SAU Community

jp spec s15 vs aus spec s15

Guest SXU29T

By Guest SXU29T,
in Engines & Forced Induction

 Share

Recommended Posts

cameron Mentor

cameron

Posted
Posted
That would explain why a slightly moded jap spec will spank an aussie version with the same mods. however start changin the oz spec engine managment and u have the identical car!

Don't forget guys with the aus version S15 if you go for an aftermarket ecu,

Eg: Apexi Power FC you have to switch wire 30/31 on ecu wiring harness to run the fuel pump & i think the CAS.

:D

marchGTR Collaborator

marchGTR

Posted
Posted

jap spec has bigger injectors, and a 6 bolt roller bearing turbo compared to the aussie 5 bolt. the steering wheels are nicer in the jap spec, the exhaust in both is very simiar and from my experience the difference in boost is minimal if at all different. ice performance have told me that the most they are able to speeze out of the aussie spec is about 180rwkw and jap spec more like 215rwkw. I have witnessed first hand two of my freinds going at it. one had a stock japspec the other an aussie spec with catback exhaust, and the japspec raped it everytime

  • 14 years later...
Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted

Australia is also hotter and has shitter fuel, so the ADM version has less timing in it. Another reason why you see stock turbo JDM S15 crack ring lands when kids ram in 1 bar of boost with the stock ECU/tune and go to Mexico.

admS15 Grand Master

admS15

Posted
Posted

Jdm makes 184kw@fly. Adm makes 147kw@fly.

As noted above Jdm has more timing advance.

Jdm has digital climate control, adm is analogue.

The Jdm's imported where the pre Adm years so i think that was 99 and maybe early 2000.

I wouldn't worry about which one, just buy the best condition example you find. Personally i favour the Adm version as there is less chance of the odometer being wound back and less chance of rust due to climate conditions. They are things to definitely check for on either model.

Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted
7 minutes ago, r32-25t said:

Aussie versions of cars also end up with factory immobilizors where the Japanese ones won’t 

Then you install a JDM ECU, swap the 2x CAS pins and 1x fuel trigger and off you go - or BYO Haltech/Link/MoTec/ etc.

Poor effort on the NATS lol.

The Bogan Grand Master

The Bogan

Posted
Posted
1 hour ago, admS15 said:

Jdm makes 184kw@fly. Adm makes 147kw@fly.

As noted above Jdm has more timing advance.

Jdm has digital climate control, adm is analogue.

The Jdm's imported where the pre Adm years so i think that was 99 and maybe early 2000.

I wouldn't worry about which one, just buy the best condition example you find. Personally i favour the Adm version as there is less chance of the odometer being wound back and less chance of rust due to climate conditions. They are things to definitely check for on either model.

My stock NA 86 makes more @fw than the ADM S15.

I don't want to talk anymore about this though......

 

I like my 86, but I lay awake at night thinking of what could have been.......

 

 

 

tumblr_mhzg9zdhDv1rv8zdao1_500.gif

admS15 Grand Master

admS15

Posted
Posted
My stock NA 86 makes more @fw than the ADM S15.
I don't want to talk anymore about this though......
 
I like my 86, but I lay awake at night thinking of what could have been.......
 
 
 
tumblr_mhzg9zdhDv1rv8zdao1_500.gif.7f98fd2241950a639881384e5e19a808.gif
Yep, except an s15 can make 200rwkw tuned and around 220rwkw on e85.
  • Sad 1
The Bogan Grand Master

The Bogan

Posted
Posted
5 hours ago, admS15 said:
5 hours ago, mlr said:
My stock NA 86 makes more @fw than the ADM S15.
I don't want to talk anymore about this though......
 
I like my 86, but I lay awake at night thinking of what could have been.......
 
 
 
tumblr_mhzg9zdhDv1rv8zdao1_500.gif.7f98fd2241950a639881384e5e19a808.gif

Yep, except an s15 can make 200rwkw tuned and around 220rwkw on e85.

As stated, I don't want to talk about it.

 

Sadly I missed a ultra low km one owner ADM when I was looking.

 

The thing was like new, stored, it had 5000km on it if I recall right, it sold for $28k I believe, which I would have paid.

It was red, a yellow one, exact same condition, owned by the same guy sold about 2 months prior.

I doubt I will ever see one in that condition again.

Bugger

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
    • TurboTapin
      Most women will agree that parking is the most taxing part of driving

      By TurboTapin · Posted

      What a time to be alive!!
×
×
  • Create New...