Jump to content
SAU Community

Recommended Posts

Hi um i dunno if this helps but i had 3 1/2" catback then i gat the epa notice, so i had a good look at what i had under the car and found a Flange plate just under the the rear axel that had the cannon attatched, so i went to an exhaust place and got them to make the back bit out of 2 1/2" with a nice big quite muffler. It cost me 140 but at least they done what i wanted other places wanted me to replace the lot for 350!. Anyway the test showed a nice quiet 80 db.

I noticed that i had no power, no noise and no fun. so as soon as i passed the test i chucked the cannon back on all better now, and when i get another notice probably next week i already have the solution!

:D

i got tested at 100dB with my Trust Power Extreme Cat back, Blitz Front pipe, and Trust Dump... went down to the local exhaust shop and got a weasly bit of 2" from the rear flange with a fairly pissy round standard muffler and they re-tested it at 85dB! only cost about $120 and very suprisingly the car doesnt seem to of lost any noticable power!! however its quiter than a standard ford laser! :D

Also, aparently Silencer plugs WILL NOT PASS according to the EPA noise tester i went to! Mine only brought the noise down to 94dB anyway but the guy said even if they're welded in they're not allowed to pass them any more! :ninja:

Does the EPA actually get the car on a hoist or take it for a drive during a full emissions test??? (obviously this is different to getting a RWC)

yeah i the fmic isnt stock, i undersatnd you cant have both. i just thought it was wierd how quick he let me go, and i also thought that you got caneried when you got a epa???

they dont need to stick around long.... once they've got ur rego they already know where to send the letter!

probly just checking if the driver was also the owner! :D

  • 2 weeks later...

This should be an easy one, but a quick question, if I buy a car with an epa on it and no rego in victoria, can I get a day permit to get it up to Canberra? or will I need to trailer it up? Car has an epa on it for excessive noise.

If the date on the notice has passed the cars rego will be suspended. That mean that in VIC you can;t get a day/unreg vehicle permit.

As all the state systems are hooked up now I would be almost certain you would not be able to get a permit to drive the car in the ACT. So you will have to trailer it up.

  • 3 weeks later...

Thanks for the info stolen_s15

It might be easier if I just post up the car's mods and if anyone can tell me which is defectable, apart from boost controller. Couldn't find any info on whether other items eg., turbo timer defectable.

HKS split dumps

HKS front pipe

HKS hipower catback (legal noise I think)

HKS adj cam gears (IN/EX)

HKS timing belt with Trust clear cover

Apexi pod air filter

Turbo timer

Nismo twin plate clutch (super coppermix)

Cheers. Much appreciated.

Clutch - No issues

Air pod - only okay if you dont have a front mount added on (GTR excepted)

Timing belt - No issues (cant see any problem with clear cover)

Catback - Legal if it meets both noise and emissions levels.

Others, no idea, but I think they are all okay.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...