Jump to content
SAU Community

Recommended Posts

  • 2 months later...

Would a ding like the one on this car prevent roadworthiness? The one on the back door most specifically, the paint would probably buff off.

cp5324997492350916733.jpg?height=700&asp

Edited by bucket_boy101
  • 1 month later...
  • 3 months later...

I've just bought an R34 GTT and I'm looking for some original rubber brake and clutch pedal covers for a roadworthy. I know in the past aftermarket bolt-ons have been denied, and I don't particularly want to pay $150ish dollars for genuine GTR ones. Any help would be much appreciated.

I spoke to the mechanic today who will be doing the roadworthy and he said bolt on type of pedal covers would need to be bolted THROUGH the pedals, not bolted on using brackets as most aftermarket kits have, or alternatively, grip tape/skateboard deck tape is acceptable, as long as the pedal has a grippy surface it will pass. So I spent $5 at a bike shop on a 90mm x 500mm strip of scooter deck tape. I'll have enough left over to re-cover both pedals 5 times over. He is also happy with coilovers as long as they are a quality brand (mine are Teins) and not a backyard job. Car is booked in for Monday, happy days!

  • 4 months later...


Got a question for everyone, i was in a quiet carpark tonight and was revving the car stationary a bit (its fairly loud) and a unmarked ford transit van pulls out of nowhere with 6 cops in it, two come out and say what the hell are you doing..


long story short they didn't check my license or anything.. just said your car dosnt sound normal I'm going to take your rego down and pass it on to a highway patrol to check over your car so expect a letter in the mail !!


Do you guys think the cop was bluffing? does a why patrol come to your house to check your car or? any help will be greatly appreciated.


there is nothing stoping a cop coming around and checking your car. strange if they had that much of a concern that they didnt get the HWY Patrol car to come there on the spot. but i suppose all you can do is wait now.

You'll most likely get an EPA notice in the mail, organised BY hwy patrol courtesy of him forwarding your details to them. Which means going to a noise test. Unless he got lazy later on or forgot about it, you'll get a notice.

I was in a quiet carpark tonight and was revving the car stationary a bit (its fairly loud) and a unmarked ford transit van pulls out of nowhere with 6 cops in it, two come out and say what the hell are you doing..

I would have said the same thing... :P

  • 3 weeks later...

Ok, so I tried to get a roadworthy today, and it failed because when you put the headlights onto high beam, the low beam lights switch off.

According to Vic RW standards, the low beams need to stay on when you're on high beam.

AFAIK, this is normal for the car, but the workshop guy said absolutely no room for negotiation on this.

WTF? Anyone had any experience with this?

uwot?

Skylines (and lots of cars) do this from factory... as you pull the stalk towards you, highbeams come on and then (less than a mm later) lowbeams go off...

I assume to limit power draw or overheating of the headlight casings?

They got complianced just fine like this...

I'd ask him to point out where in the Vicroads regulations it specifies headlights and high beams must come on at the same time. Nothing in VI26 stating that at all.

https://www.google.com/url?q=https://www.vicroads.vic.gov.au/~/media/files/documents/safety-and-road-rules/vsi26_1212_web.ashx%3Fla%3Den&sa=U&ei=a8xlVOGCCIO0uASmn4H4Dw&ved=0CAYQFjAA&client=internal-uds-cse&usg=AFQjCNGnCFP--oDZ6hARnPy2LHeNtUDf2Q

Nothing in ADR 46/00 about headlight/high beam coming on at the same time either if you wanted more proof that dude is talking out of his arse :P

http://www.comlaw.gov.au/Details/F2006L02294

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Johnny is sad now... Because you didn't get Bosch Motorsport ABS.  
    • Hey keep the ideas coming, I'm always keen on projects! But, problem fixed!  I got a cheapie ozito scope from Bunnings and had a good look in and around the bearing and sensor hole. I couldn't see a smoking gun but the bearing looked a bit strange, especially when comparing with a new one. I thought the cover had come off the bearing magnets.  Sorry for pics of a screen, I didn't have an SD card.     Good thing I had the old one to inspect. So, given I'm like a pit crew with wheel bearings and luckily I had a spare bearing because I f**ked up my parts order, I decided to just smash it out. Got the old one out in about an hour. So much easier when the parts haven't had a chance to rust together yet. 😂 And, well, found the problem.    In the second pic at about the 8 o'clock position, you'll see what I think is the tip of the old sensor.  The new sensor has definitely been rubbing but it's all intact, just a little shiny so I'm hoping it's fine.  The car brakes perfectly now and no errors.  I think the job took about 2.5h in the end. 👍🏻 I really appreciate the help in here as usual. Thanks guys.
    • I was only looking because I saw some drops on the ground but it wasn't alot. Recently had it serviced will ask the mech to confirm. Find it strange that it looks standard though, can see in another photo of a random box 
    • So...not sure if you know if that has always been there or why you went looking. It could be old damage from a clutch explosion, or even just the gearbox got dropped somewhere along the line. Basically, you should seal it up to stop oil and dust getting into the bellhousing, but it doesn't matter too much and is not structural. I'd suggest something like a glob of JB Weld. BTW what gearbox oil are you running, I would guess the breather has been spewing it everywhere.
    • Hey Duncan thanks for your reply. Sorry mate I know the photos are shit.  Took another photo for reference. Seems the casing does have a hole in it looking on the net, fluid seeping out. Added a photo   
×
×
  • Create New...