Jump to content
SAU Community

Recommended Posts

I still seem to be the anomaly here.

Driving to Canberra and back the lowest tank for me was 8L/100km.

Maybe it's because I don't usually use the aircon?

Awesome figures Jase! The only time I had better economy was with the Fcon in and a long trip up the Hume Hwy.

No chance I could get that with just the standard ecu. Are you running a remapped ecu and rwd with very skinny tyres at insane psi or something?

Screw you all!!! According to the stats I've been gathering, I'm averaging 14.87l/100kms. :(

I've got a full exhaust, FMIC, PowerFC and a GReddy EBC - must be the short trips and heavy right foot. I don't speed anywhere, but I love the feeling of acceleration, so that's killing my fuel economy.

Awesome figures Jase! The only time I had better economy was with the Fcon in and a long trip up the Hume Hwy.

No chance I could get that with just the standard ecu. Are you running a remapped ecu and rwd with very skinny tyres at insane psi or something?

That was on Potenzas. They were pumped up at the time but nothing ridiculous.

Only mod that I believe may have made a difference to fuel economy is the runner spacer. Ever since I chucked that in it seems more than happy to sit in 5th/overdrive from about 70kmh and up. Actually seems to have a lot more torque from say 70kmh to 90kmh than before.

Is there any way I can tell if this needs doing? I'd rather not drop $250 "just to see".

Disconnect it & use up a tankfull, see if any change?

______________

Here's stats from 3 fill ups on my C34 S1- stock everything except no cat. 'Z' 95 fuel.

05/03/12: 10.72/100km

08/03/12: 9.96/100km... first time ever getting into 9's

13/03/12: 10.6/100km... this one is the most common result

  • 1 month later...

My 34 S1 RS Four stock everything except no cat, burns about 20-23 L/ 100 km in city, and about 15-16 L / 100 km on highway. 95 fuel. I drive not faster than 110 km/h, but I like to speed up by pressing the gas pedal to the floor. Our fuel is terrible, so If I tucked your petrol, consumption would be less.

Edited by muratti

I still have the same o2 sensor in from when i bought the car. Still get 600k's before fuel light comes on. Still give it beans most days. Car is now @ 308,232klms.

NEVER buy Matilda fuel. It was PULP but found performance was down and only got 450klms to a full tank. Shell 98 all the time, everytime for me.

Edit: I totally forgot to say - At 180,000 k's I did pull the o2 sensor out. I put it in a small tub of fuel and used a new paint brush to clean the sensor tip, in through the little slits too.

Edited by Jezboosted

Is there any way I can tell if this needs doing? I'd rather not drop $250 "just to see".

EDIT: Wait, you have a VQ. You could be right on the price.

Edited by Cowboy1600
  • 3 weeks later...

I got 12.47l/100km on my very first tank with quite a bit of spirited driving, was testing the car out when i just got it.

Then 11.3l/100km on my second tank, these are with 85% suburban driving. :rolleyes:

Only mod is a cat-back but on a manual hence the low figures?

Just filled my S1 manual RB30/25. I have been driving normally - changing up at 2 -2500 revs, the odd boost on the motorway and it took 62.65 L for 448km so about 14L per 100km (mostly short trips less than 10km - four or five about twice that).

71 litres for 570 odd km's. Getting on for 150,00 km's mileage now. Have cat fuel filter fitted but seems to make little difference. Upwards of 200 km's on first quarter tank, open highway, promised much but failed to follow through in city driving. I expected better combined based on past performance.

BTW: MY rank should be VQ25DET, to whom that matters.

Edited by STAG250

I'm monitoring my fuel consumption following the road tune. It seems quite reasonalble concidering the changes I have made. Its hard to measure properly, because the Mrs trips are not long, but I'll have a crack.

Staqg250 - your Rank is based upon your post count. You start as a RB20e then progress ir RB20de, det, RB25de, det etc etc up to RB26dett with something like 10,000 posts.

A few of us smart cookies just changed it to something more suitable for M35 owners.... :P

Ok finally had a gentle driving week in my car and I've come back with 13.4l/100km, all highway. Alot higher then it used to be before the tune but with low level mods it's probably about right.

  • 2 weeks later...

I've gone back to Shell 98 octane and I am getting far better fuel economy now than when I was running Caltex Vortex 98. Last time I let the tank get down to near empty I had done 500km, and it took 61L to fill the tank. Now after a few tanks of the Shell fuel, I was on 275km at a half tank of fuel before I filled up this morning. I mostly drive country roads/highway going to and from work here in Canberra, all the while in the midst of the daily tradie grand prix.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...