Jump to content
SAU Community

Recommended Posts

Hi, does anyone knows how much oil need for engine gear box and diff in R33 Rb25det? and what fluid is better for gear box?

thanks in advanced

can i use nissan Genuine DIFF OIL HYPOID SUPER GL-5 or DIFF OIL HYPOID LSD GL-5 in gear box or those fluids are for just differential???

thanks in advanced

Edited by guricha

Good lubricant is lifestyle lubricant, comes free in boxes of 12; if its good enough for little johnny, its good enough for the box.

lolz na, ill vouch for the castrol tranzmax z though, i use it in my r34 gtr transfer case and it fantastic. For my gearbox i use v160

  • 2 weeks later...
Good lubricant is lifestyle lubricant, comes free in boxes of 12; if its good enough for little johnny, its good enough for the box.

lolz na, ill vouch for the castrol tranzmax z though, i use it in my r34 gtr transfer case and it fantastic. For my gearbox i use v160

'lil johnny' must be doing something wrong if he needs 'lifestyle lubricants' ;)

  • 3 weeks later...

sydneykid:

If i were to buy 3 x 4L Redline Lightweight shock proof oil, could i do an R33 GTR gearbox, transfer case, and both diffs?

Is this oil suitable for all 4??I

want nothing but the best for my beast :)

Cheers.

  • 1 month later...
For a sticky.............................

What we use;

4WD Transfer = Castrol Transmax Z

Automatic Transmission = Castrol Transmax Z

Manual Transmission = Castrol Syntrans 75W-85 or Castrol Syntrax 75W-90

Differential = Castrol SAF-XA

Cheers

Gary

Hi SK

I've had a 33 for a couple years now and everything i've had to do to my car, i've been able to figure out from your posts. I'm sure you hear it a lot but just wanted to say thanks for the knowledge - you make dumb a$$e$ like me be able to work on their cars.

cheers mate

Hurf

  • 3 weeks later...

I just put the Redline Lightweight Shockproof Gear Oil in my R34 GTT. I only needed the one bottle, is this right?

Also is this oil a good oil to be using in the gearbox?? And is there any different weights available for this oil or just the one?

I've been having a grinding noise when dropping down gears at higher revs eg. 60km/h into 2nd makes a grind, 110 into 4th grinds, 3rd grinds when I shift up from 2nd at higher revs...

I changed gear box oil to see if the problem would go away but it hasn't :S I think it may be clutch related though as the grind can be felt through the clutch pedal when releasing it and the gear engages.

Could it be the clutch or thrust bearing??

Any help would be awesome!!

i believe nissan say 7.5w/30 - where the f*ck you get 7.5 i have no idea...

Marcus, do you know about www.performancelub.com? if not, all the oils you'll ever need are there.

If the 26 sees mild track use, i'd go with a 10w40 (Royal Purple, Amsoil, Redline, German Castrol)

Street use i'd be more inclined to use an 0w or 5w. 5w30 is probably you're closest to the factory specs.

I'm running 5w30 Royal Purple at the moment.

  • 3 weeks later...

Manual Transmission = Castrol Syntrans 75W-85 or Castrol Syntrax 75W-90

Differential = Castrol SAF-XA

would castrol saf-xa be fine for r32 gtst diff??

thanx heaps been trying to find this sort of info

  • 1 month later...
  • 3 weeks later...

In my R32 GTR, I've decided to run:

Gearbox: Redline Shockproof Lightweight

Front Diff: Redline Shockproof Lightweight

Transfer Case: Redline High Temp ATF

Rear Diff (LSD): Redline Gear Oil 75w90

gotta love www.performancelub.com

On a 4WD; I assume that there is a filler plug if I don't want to fill my transfer case from the shifter hole? Looking at the workshop manual it seems to be at the rear of the transfer case on the driver's side of the rear propeller shaft - is that right? Also, the service manual suggests that a sealant (Three Bond 1215 - genuine Nissan part KP610-00200) should be used when installing the drain plug - is this unnecessary? If it is necessary shoudl the same sealant be used when installing the drain plug into the gearbox as well? Thanks, Ben.

My mechanic (GTR specialist) is quite happy to do (bit reluctant) the gearbox and both diff fluids I've mentioned, but insists will only put in the genuine Nissan Matic-D ATF in the transfer case (I won't argue with him, he worked at a Nissan dealer for 7 years so I will go with what he says). Did alittle research into it and it seems most jap tuners say to only use the genuine Nissan Matic-D in the transfer cases. Then again it's suggested Matic-D is nothing more than Castrol ATF/Mercon IV.

I think this is a interesting read (copy and paste from elsewhere, Matic-D and the special powersteering fluid mentioned are the same part-number)

Have a document from Nissan NZ, which came from Mr.K.Shindo of Nissan Japan.

It outlines his thoughts on fluids that should not be replaced by aftermarket products.

1. Transfer case fluid

Nissan Matic D is strongly requested because high torque is applied to transfer unit.

2.. Transfer case (ATTESA E-TS-PRO Actuator) : It is not acceptable to use DEXRON III fluid.

> Only Nissan Power Steering Fluid Special use is required.

Today I received the technical information from our design department.

1. The difference between the DEXRON III and Nissan Power Steering Fluid Special

The viscosity characteristic of Power Steering Fluid Special is lower than that of ATF DEXRON III and the resistance to wear is also improved. Each viscosity is the same level at 100 deg.C and the former viscosity is designed to have the lower value for under 100 deg.C than the latter viscosity.

This characteristic is aimed to rotate an oil pump located in ATTESA PRO

actuator easily at the extremely low temperature (Around -30 deg.C or -40 deg.C)

2. What will happen if a customer puts DEXRON II or DEXRON III into the ATTESA PRO actuator reservoir in the trunk ?

The 4WD performance will be largely decreased at the low temperature because the viscosity value of DEXRON II or III is extremely high compared to that of Power Steering Fluid Special ;

As the rising characteristic of 4WD torque transfer becomes worse, it takes the longer time to transfer the driving torque to the front wheels. There is a possibility that the 4WD cannot be achieved in the worst case.

When I asked for fluid for my transfer case at Nissan in Rockdale (who proport to sell to imports and provide Nismo gear) I was told that any automatic transmission fluid would do. I asked abour gearbox oil, thy told me that they ony sell in quantities of 20 litres and did not have the specified viscosity.

Castrol recomend Castrol Transmax Z, so do Sydneykid and Duncan; just my two bob, but that'll do me!

Moodles 2; can your mechanic get 2 to 4 littres of Nissan Matic-D ATF or is he getting it in large quantites being a mechanic and all?

Moodles 2; can your mechanic get 2 to 4 littres of Nissan Matic-D ATF or is he getting it in large quantites being a mechanic and all?

My mechanic gets really good prices from the Nissan dealership he used to work at, I'm not sure how how many litres he got all I know he priced it for me as $50, all I know it's enough to cover the ATTESSA (0.5l if duncan is right) and transfer case (1.5l), so I guess 2-3litres.

edit: plus he owns a R32 GTR as well so probably brought for his supply as well.

Your comment about needing 1.5 litres got me to thinking as Duncan has suggested that the transfer case takes 2.0 litres. I looked in the workshop manual and it suggests 1.8 litres. For the record I put 2.0 litres in mine last night (I could not get the filler plug out and thought it would be just as good to pour in the exact quantity). I didn't notice any real problems today; but I guess the difference between 1.8 litres and 2.0 litres is relatively small!

For fluids the manual recommends

Transfer case (page CH-59) - 1.8 litres of Nissanmatic fluid D [approx. 1.8 litres]

Manual transmission (page CH-23) - Nissan gear oil MP-G special GL-4 #75-90 [approx 4.1 lites]

Front final drive (page CH-125) - Nissan gear oil hypoid GL-5 85W-90 [approx. 1.0 litre]

Rear final drive (page CH-125) - Nissan gear oil hypoid LSD GL-5 80W-90 [approx. 1.5 litres]

I have no personal opion as to the products and quantities; but I thought I would provide reference to the manual to round out the discussion.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
×
×
  • Create New...