Jump to content
SAU Community

Recommended Posts

Yeah but the veyron is an 8 Litre 16 cylinder engine. Not a 2.5 Litre 6.

Nytsky's engine is producing 91kW per cylinder, while the veyron is only pushing out 46kW per cylinder.

Thats a lot less strain on each cylinder. Also the veyron engine is built to the most ridiculous of tolerances in a humidity and temperature controlled room that is 100% dust free.

So your not really comparing apples with apples.

Nytsky, very awesome effort! However, what in the hell are you going to do with 546kW in a RWD car? lol

To correct you its more like 100kw per cylinder.

And the car is built for nothing else than to put a smile on my face every time I get into it.

If you look at extreme setups such as a drag car which is running thousands of HP, they need to be pulled down after each 5sec run, my mates dad has a 5sec drag car and he tells me the stories which is just mind boggling so u need to be rich with sponsorships.

Yeah I've heard it from a few guys actually but wasn't sure how true it was as to me, pulling it down every 5000km would be painful. 20000km on the other hand wouldn't be sooo bad for car which isn't a daily driver.

I was interested in buying Envy motorsports 'the jetters edge' r34gtr a while ago and he killed the sale when he told me it had its routine 5000km rebuild.

prolly a good thing you didnt man..... i would touch anything that they had touched after what happened to my best mate..... it would have been a 5k rebuilt not caz of the power!!! anyway his car is running sweet now after JEM fixed it :)

prolly a good thing you didnt man..... i would touch anything that they had touched after what happened to my best mate..... it would have been a 5k rebuilt not caz of the power!!! anyway his car is running sweet now after JEM fixed it :)

Hear, hear. I wouldn't go anywhere near them.

To correct you its more like 100kw per cylinder.

And the car is built for nothing else than to put a smile on my face every time I get into it.

:cheers:

Car sounds nuts. Love it.

just flicked though this thread 76 pages of cash burning power

if it were my car i would have burnt it years ago

pants of for persisting

enjoy the power skidz.... untill the next rebuild

buy 2015 this thing will have a 4 litre stroker and a gt7564 turbo

Top work Dave, good result from relatively low boost. Much fun to be had for a long time there.

HD video from this weekends escapades is mandatory I believe!!! :thumbsup:

Oh and good to see the usual suspects posting up absolute tripe, always makes for a laugh.

I have a GoPro that I haven't used yet, might give that a go.

Car is finally home after what feels like 2 years (not far off it).

Its bullshit to drive, the sound of the turbo is a good distraction from the lag lol.

Took a few people for a spin and we all giggled like school kids after the gates open, seriously sounds like war is happening under the bonnet :)

Much WIN!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...