Jump to content
SAU Community

Recommended Posts

Finished work tonight in Ferntree Gully, was headin back home on Burwood Hwy and saw a white series 2 r33, plates were tmg772 i think. Sweet rims on it and it had an SAU sticker on the right rear 1/4 panel, so i kno the guy's on here lol. Cruised side by side for a bit then he turned up stud rd and i went straight

Saw a silver R34 with the plates ''RB26N1'' crashed in the front yard of a house down Freeman Av in Burnisde tonight. Pretty messed up dont know how the hell they managed to get it where it was.. anyone from here? I was in the white R31 that drove past twice.

Hey Jessie, wat were u doin on my side of town!! :blush:

Yeah that was my brother.

Unfortunantly, Yes..the dickhead was being a dickhead again :)

.. and he is ok.

Trust me its not the first time he has crashed a car...

He was lucky to survive the last one and he still drives around like a hoon?

Kris ur not exactly the most innocent driver on the roads ur self. What he did was wrong and hopefully dsnt happen again..i guess some ppl just have shit for brains

Silver R34 GT-T with WA plates [iVUS] on Barkly St, Footscray around 2 pm. Azn driver.

Silver R33 GTS-T? with standard plates and pink/purple decals on side on Russel St, CBD around 2:50 pm. Azn driver.

Silver R32 GTS? with standard plates on Dynon Rd, West Melbourne at around 3 pm.

Spotted Silver R33 GTR (I think) on Nepean Highway (Brighton) at about 8pm tonight, and I think he had SAU stickers too. We both cruised through a booze bus at about the same time, obviously a busy night for the cops to let two lines through like that! :D

that was me I'm pretty sure... you were in the white 34 with black wheels... LMGT4's? car looks very cool:)

yep not often you roll up to one and they let you go, I slowed right down as I was expecting to get waved in but they were already full

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...