Jump to content
SAU Community

Recommended Posts

NISMO PROTO GTX-1 2500R

(IVE BEEN MEANING TO GET THIS UP FOR AGES - APOLOGIES FOR THE DELAY !!)

HERE IS NISSAN'S / NISMO'S / OMORI FACTORY'S (WELL MINE ACTUALLY) 1993/1995 R33 SKYLINE PROTOTYPE SINGLE TURBO 2.5 LITRE REAR WHEEL DRIVE 4 WHEEL STEER NO ABS SPORTS COUPE "BITUMAN SNIFFING" STRAIGHT SIX THAT PROVED TOO POWERFUL FOR A JAPANESE DOMESTIC MARKET RELEASE. ONLY 3 OF THESE EACH HAVING SLIGHTLY DIFFERING SPECIFICATIONS WERE BUILT WITH THIS CAR PRODUCTION "NO. 2" (P002) THE ONLY COMPLETE AND INTACT EXAMPLE KNOWN TO EXIST.

BEST SUITED TO WIDE OPEN SPACES THIS CAR COMES INTO ITS OWN AT AROUND 170KPH (TOP SPEED 285KPH) WHERE ITS IMPECCABLE BALANCE OF RAW POWER AND CRISP "POINT & SHOOT" RESPONSIVE HANDLING CAN BE CONSISTENTLY ADMIRED ENJOYED AND RESPECTED.

POWER - 460PS

POWER - AT THE REAR WHEELS - 273.8KW

POWER - AT THE FLYWHEEL - 375KW

POWER TO WEIGHT RATIO - 0.19KW/KG

ENGINE HARDWARE:

RB-X GT 1 BLOCK - NISMO INTERNALS - 600CC NISMO INJECTORS - GT-R FUEL RAIL AND INJECTOR CRADLE - CARBON FIBRE COLD AIR INTAKE WITH APEXI AIR FILTER - TRUST TD05 JOURNAL BUSH TURBO CHARGER - CUSTOM NISMO INTERCOOLER - EXTRUDE HONED PLENUM - PLUMB BACK BLOW OFF VALVE - NISMO 4.2L PER MIN. FUEL PUMP - SPLITFIRE IGNITION SYSTEM - APEXI POWER FC ENGINE MANAGEMENT SYSTEM - GREDDY PROFEC SPEC B II BOOST CONTROLLER - OIL COOLER - 3IN FRONT PIPE - 3IN STRAIGHT THROUGH MANDREL BENT EXHAUST SYSTEM WITH 4IN FUJITSUBO CANNON - Z32 AIR FLOW METER - APEXI ELECTRONIC BOOST GUAGE.

DRIVETRAIN:

GT-R GEAR SET - EXEDY CERAMIC 3 PUCK CLUTCH AND LIGHT WEIGHT FLYWHEEL - GT-R AXLES - NISMO 1.5 LIMITED SLIP DIFFERENTIAL WITH 4.4 FINAL DRIVE RATIO.

SUSPENSION / BRAKES:

BILSTEIN TRACK SHOCK ABSORBERS FRONT AND REAR WITH TANABE SPORT SPRINGS (LOWERED 20MM) - GT-R STRUT BRACES AND SWAY BARS FRONT AND REAR - BREMBO GT-R BRAKE CALIPERS WITH DBA 5000 SLOTTED ROTORS FRONT AND REAR - NISMO MASTER CYLINDER BRACE - ENDLESS COMPETITION BRAKE PADS.

WHEELS AND TYRES:

17IN X 9IN R33 GT-R WHEELS - DUNLOP SPEC-R 245/45/17 TYRES.

BODYWORK:

NISSAN GUNMETAL PAINTWORK (KH2) - GT-R STYLE FRONT BAR LIP AND GRILLE - GANADOR AERO MIRRORS - GT-R REAR WING ASSEMBLY WITH N1 CARBON FIBRE BLADE - BADGES DECALS AND IDENTIFICATION PLATES BEARING "NISSAN" "OMORI FACTORY" "NISMO" "GTX-1" "2500R" "RB-X GT 1" "P002" AND "PROTO".

INTERIOR:

GT-R FRONT AND REAR SEATS - NISMO STEERING WHEEL GEAR KNOB AND PEDALS - APEXI REV/SPEED METER - GREDDY TURBO TIMER - DEFI OIL/WATER TEMP/PRESSURE GUAGES - KENWOOD KDC 2020 HEAD UNIT WITH 600W AMPLIFIER FRONT SPLITS MIDS/TWEETERS REAR PARCEL SHELF 2 WAY MIDS AND BOOT MOUNTED 10IN SUB WOOFER.

WELL I GUESS THATS ABOUT IT...... OH YEAH !.....

SORRY - BUT ITS NOT FOR SALE :down:

CHEERS MALCOLM :D

post-9783-1208757733_thumb.jpgpost-9783-1208759372_thumb.jpgpost-9783-1208759749_thumb.jpgpost-9783-1208760061_thumb.jpg

post-9783-1208760410_thumb.jpgpost-9783-1208761168_thumb.jpgpost-9783-1208761710_thumb.jpgpost-9783-1208776274_thumb.jpg

post-9783-1208762118_thumb.jpgpost-9783-1208762262_thumb.jpgpost-9783-1208766628_thumb.jpgpost-9783-1208766885_thumb.jpg

post-9783-1208767672_thumb.jpg post-9783-1208767805_thumb.jpgpost-9783-1208769982_thumb.jpg

post-9783-1208768097_thumb.jpgpost-9783-1208768231_thumb.jpg

post-9783-1208768362_thumb.jpgpost-9783-1208772495_thumb.jpgpost-9783-1208768563_thumb.jpgpost-9783-1208768687_thumb.jpgpost-9783-1208814951_thumb.jpg

post-9783-1208815107_thumb.jpgpost-9783-1208815308_thumb.jpg

post-9783-1208815469_thumb.jpgpost-9783-1208816112_thumb.jpg

post-9783-1208816635_thumb.jpgpost-9783-1208816274_thumb.jpg

post-9783-1208816413_thumb.jpgpost-9783-1208822281_thumb.jpg

post-9783-1208829175_thumb.jpgpost-9783-1208829527_thumb.jpg

post-9783-1208829736_thumb.jpgpost-9783-1208832835_thumb.jpg

post-9783-1208761928_thumb.jpg

Edited by malcolm
  • Like 2
Link to comment
https://www.sau.com.au/forums/topic/215823-nismo-proto-gtx-1-2500r/
Share on other sites

wasnt this car featured in High performance imports very recently ? Lucky owner...wish I had it

Sure was - have had lots of requests to make use of the great pics Dean from HPI took and get it up on SAU for those who didnt see the magazine - malcolm - :down:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There are black hose clamps as well if you care. Plazmaman for example sells some: https://plazmaman.com/product/black-hose-clamps-premium-quality-stainless-breeze/
    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
×
×
  • Create New...