Jump to content
SAU Community

Recommended Posts

Hi every one. I'm back. Here's the PU (powered up) high flow based on a R33 2IU turbo. Note how we've modified the stock turbine inlet to increase its air ratio. Its running a custom sleeve bearing 3576 CHRA. I believe it can possibly push out close to 300rwkws with external gate.

(This high flow can be done with stock R33/4 turbo's comp housing)

puhousing1.jpg

The cost to do this high flow is $1200, and its high recommended to run it with a high pressure actautor at $150 additional.

With the 76mm comp housing it should hit 300rwkws with flate 21psi. We can alter the stock turbine housings even bigger if need to. This one is currently running off a modified gt35 turbine, Thats about the biggest we can stick in there.

Here are few more Photos of Powered Up high flowed R33 turbo with 2IU turbine housing:

Note the difference in volume of modifed turbine housing on the right:

housings.jpg

pufront.jpg

purear.jpg

Cant wait to see one come through, if you can find a decent donor car to test it (mechanically 100%) i will be happy to subsidise the tune for R&D.

Cant wait to see one come through, if you can find a decent donor car to test it (mechanically 100%) i will be happy to subsidise the tune for R&D.

Damn if only I was in Melbourne :P...

Cant wait to see one come through, if you can find a decent donor car to test it (mechanically 100%) i will be happy to subsidise the tune for R&D.

*cough*

:)

Very happy with results from the new turbo (g2), well worth the money. Turbo is installed, and pulls a lot harder through-out every gear. (just ripped a m3 lol)

Excellent product and customer service, and highly recommended.

-I just wish i saved all that money instead of getting gt 3040, spending big money on injectors, fuel pump, z32 tune etc etc just to get done by cops. Now i get similar power, and i mean similar! and all i got illegal is my t piece boost controller. Very satisfied.

Here is 2 pictures of my stock turbo V G2 to compare the difference for everyone to see.

dsc00005ane.th.jpg

dsc00007pm.th.jpg

if i had cash id put my car up as a test bed for the new 2IU setup, yet need to many supporting mods to jump so soon.

Cant wait to see the results either way

Very happy with results from the new turbo (g2), well worth the money. Turbo is installed, and pulls a lot harder through-out every gear. (just ripped a m3 lol)

Excellent product and customer service, and highly recommended.

-I just wish i saved all that money instead of getting gt 3040, spending big money on injectors, fuel pump, z32 tune etc etc just to get done by cops. Now i get similar power, and i mean similar! and all i got illegal is my t piece boost controller. Very satisfied.

Here is 2 pictures of my stock turbo V G2 to compare the difference for everyone to see.

dsc00005ane.th.jpg

dsc00007pm.th.jpg

Have you had it dynoed with the turbo?

Hi every one. I'm back. Here's the PU (powered up) high flow based on a R33 2IU turbo. Note how we've modified the stock turbine inlet to increase its air ratio. Its running a custom sleeve bearing 3576 CHRA. I believe it can possibly push out close to 300rwkws with external gate.

(This high flow can be done with stock R33/4 turbo's comp housing)

puhousing1.jpg

The cost to do this high flow is $1200, and its high recommended to run it with a high pressure actautor at $150 additional.

That is just awesome. I want, and will buy as soon as my PowerFC arrives :)

How is the response of this comapred to stock? Similar?

It wouldn't be very close to stock given how big the A/R is on it...I'm sure Stao could answer better but I imagine it would see full boost by 3800-4000rpm?

Cant wait to see one come through, if you can find a decent donor car to test it (mechanically 100%) i will be happy to subsidise the tune for R&D.

Donor right here! I have an unopened RB25 with circa 100,000km on it, completely standard / never boosted except for an exhaust system and Apexi power intake. Engine receives synthetic oil changes every 5000km :) Recently installed a Blitz CS return flow, have an 040 waiting to go in and my PowerFC is due to arrive in 3 weeks from Japan. Currently sourcing a Z32 AFM and looking at options for injectors. If you can wait the time (about a month at the minimum) let us know if you guys are both interested, as I'll be getting one of these installed and tuned either which way.

Have you had it dynoed with the turbo?

Not yet, im running MINES ecu which ill try to keep in there if AFR's are safe (will check on the dyno). Id be happy to run 14 psi, so i wont get the full benefits of the turbo but than again, i want to keep standard injectors etc etc Right now I drive it around on 14 psi with few other mods and car feels great. Once i slap on the cooler, ill check my AFR.

That is just awesome. I want, and will buy as soon as my PowerFC arrives :P

It wouldn't be very close to stock given how big the A/R is on it...I'm sure Stao could answer better but I imagine it would see full boost by 3800-4000rpm?

Donor right here! I have an unopened RB25 with circa 100,000km on it, completely standard / never boosted except for an exhaust system and Apexi power intake. Engine receives synthetic oil changes every 5000km :D Recently installed a Blitz CS return flow, have an 040 waiting to go in and my PowerFC is due to arrive in 3 weeks from Japan. Currently sourcing a Z32 AFM and looking at options for injectors. If you can wait the time (about a month at the minimum) let us know if you guys are both interested, as I'll be getting one of these installed and tuned either which way.

Ask trent at status about hiflow injectors, i have a set here that i probably wont be using, will need to be cleaned and flow tested just have not gotten around to it and its looking like im going to be using a 26 head not 25 so side feed injectors will be useless to me.

Very happy with results from the new turbo (g2), well worth the money. Turbo is installed, and pulls a lot harder through-out every gear. (just ripped a m3 lol)

Excellent product and customer service, and highly recommended.

-I just wish i saved all that money instead of getting gt 3040, spending big money on injectors, fuel pump, z32 tune etc etc just to get done by cops. Now i get similar power, and i mean similar! and all i got illegal is my t piece boost controller. Very satisfied.

Here is 2 pictures of my stock turbo V G2 to compare the difference for everyone to see.

dsc00005ane.th.jpg

dsc00007pm.th.jpg

Hi

Whats the response difference or lag difference between the G2 and the GT3040?

I have a R34 GTT Auto, a brought a GT3040(GT3082) with a .82 rear housing a while ago to put on. Now i think it might lag to much with the auto.

Am thinking of selling, to get the ATR43 G2 or get the original Skyline turbo high flowed.

PS. Only just found this forum topic and have just joined SAU

quick little video 5psi untuned

give you an idea on the induction noise

Sounds awesome mate! Post up one when you get tuned for comparison :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Mixing things up - installed some leather recaros to match the leather seat covered rear seats. Interior looks pretty schmick now except for some slight wear on the steering wheel which I will monitor and address if it becomes worse or actually noticeable!  
    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
×
×
  • Create New...