Jump to content
SAU Community

Recommended Posts

But then it would be boring..? :O

Sif, im sure a 220kw R33 is a pretty fun car.

Put it this way, it leaves a lot to be 'driven' rather than to be 'feared'.

how much to highflow a s15 turbo and what could be expected out of it? i did a read but would like to hear first hand and yes its for a sr

Can high flow that to some thing similar to a 2860 or 71 with good response and drivability. Can also high flow them in to G3 specifications which one member in NS made 290rwkws on pump 98 with, how ever its bit laggy for a SR20det.

Bit update on turbine designs, I'm working on another model based on .82 G3s by keeping combustion circulating longer inside the turbine housing before final exist, hopefully speeding up turbine wheel at higher rpm without increasing combustion pressure. If every thing works according to plan this method would deliver even better ending result then the current fnt setup.

Tsk tsk...you really should know better dave...looks like i gave you too much credit.....

trying to see your point but i'm guessing you don't have one :).

I think Ron may have gotten confused, because Birds said he was getting a SS1PU but then later he said hows my high flow going :D

I was slightly confused too

If I'm correct in my guessing, I'm getting the internals of an ATR43 SS1PU put into the standard turbo...so it will have the standard comp housing bored out to suit and look factory, but the aftermarket rear housing with FNT.

If I'm correct in my guessing, I'm getting the internals of an ATR43 SS1PU put into the standard turbo...so it will have the standard comp housing bored out to suit and look factory, but the aftermarket rear housing with FNT.

So will this make bit less power than ss1PU but with bit better response?

Can high flow that to some thing similar to a 2860 or 71 with good response and drivability. Can also high flow them in to G3 specifications which one member in NS made 290rwkws on pump 98 with, how ever its bit laggy for a SR20det.

Bit update on turbine designs, I'm working on another model based on .82 G3s by keeping combustion circulating longer inside the turbine housing before final exist, hopefully speeding up turbine wheel at higher rpm without increasing combustion pressure. If every thing works according to plan this method would deliver even better ending result then the current fnt setup.

What Is the spool point 4200 for 290 I would be happy with 4500 kinda have to expect that type of thing

So will this make bit less power than ss1PU but with bit better response?

Should be much the same, maybe a little less...I don't think the ATR43 comp housing is much bigger than the standard comp housing, if at all. I just wanted a more factory look so got Stao to high flow the factory comp. The rear housing is the same as the ATR43 so this is why it should produce similar results.

Apparently my turbo is now ready so I'll pick it up, install next weekend and get it tuned soon after.

OK, dont get confused..... Stao can highflow your turbo, its called a highflow...

Stao also does what he calls a PU highflow, which is pretty much the same as your regular highflow but stao puts a bigger rear housing on it.

The rear housing is similar to whats on the G3... But it will retain your stock front compressor housing. I believe it comfortably maxed out at 290 or so.

Ahh how nice it would be to start back at a stock skyline.. Simple highflow, cooler, zaust, tune. How nice it would be :rolleyes:

Whats the difference between the PU hi-flow and the G3?, i actually thought they where exactly the same except the the G3 comp cover is a big GT30-35 .70 one instead of standard.

But then i don't actually know and have never asked..lol

cheers

darren

Can someone correct/ clarify me:

Hypergear equivalent or closest match to:

Kando T67 = G3?

GT3076R = Kando TD06SL2 20G(10cm) = SS2 or G3?

GT3071R = SS1PU

R34 Hiflow / GCG hiflow = SS1

Can someone correct/ clarify me:

Hypergear equivalent or closest match to:

Kando T67 = G3?

GT3076R = Kando TD06SL2 20G(10cm) = SS2 or G3?

GT3071R = SS1PU

R34 Hiflow / GCG hiflow = SS1

Very gross comparisons.. I dont even want to do this but here goes:

T67 = 35R (will be similar in power on the average setup, on a well built setup you can expect more power from the 35r but more response from t67)

3076 = G3 (G3 will be laggier)

3071 = G2 (3071 may make more power)

2835 = SL2-20g/SS1PU (2835 should be laggier, final output about the same)

GCG/GTRS = SS1 (the staple 240kw products)

Please pick something now and but it lol

Very gross comparisons.. I dont even want to do this but here goes:

T67 = 35R (will be similar in power on the average setup, on a well built setup you can expect more power from the 35r but more response from t67)

3076 = G3 (G3 will be laggier)

3071 = G2 (3071 may make more power)

2835 = SL2-20g/SS1PU (2835 should be laggier, final output about the same)

GCG/GTRS = SS1 (the staple 240kw products)

Please pick something now and but it lol

Thanks man, interesting how they compare, where would you put the ss2 btw??

I would put the SS2 with the 3076. Both turbo's capable of 300rwkw, with the SS2 coming to full boost by about 3500, tad earlier than the 3076. I would have compared the G3 more to the GT35 turbo, it has potential of about 350rwkw and it won't make full power until about 4krpm...

The GT35 on an Rb25 motor is capable of about 450hp to 500hp. The G3 sits around there 450hp and with a bigger motor a little more. Its not a direct line but I certainly would not compare it to a 3076.

I would put the SS2 with the 3076. Both turbo's capable of 300rwkw, with the SS2 coming to full boost by about 3500, tad earlier than the 3076. I would have compared the G3 more to the GT35 turbo, it has potential of about 350rwkw and it won't make full power until about 4krpm...

Thats what I thought, as per my original post, ie-

ss2 = GT3076

T67 = G3

I would put the SS2 with the 3076. Both turbo's capable of 300rwkw, with the SS2 coming to full boost by about 3500, tad earlier than the 3076. I would have compared the G3 more to the GT35 turbo, it has potential of about 350rwkw and it won't make full power until about 4krpm...

Hey Sarge did u get your missing kilowatts after you fixed your intake pipe?? How much power u at now?

any reviews on the 50mm hyper-gear gates you sell?

The Silvia you see on youtube has one fitted and running for the past 5 years. I occationally uses them on the test car, works fine. Internal wise I've machined them to run on dual springs fully adjustable.

Size wise G3 is one trim larger then a 3076 with 2mms bigger in comp inducer and turbine exducer. I think might also be an slightly bigger turbo then a T67.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...