Jump to content
SAU Community

Recommended Posts

The autos are pretty awesome, we had one come in that was only making 280kw but it was frying the tyres on the rollas! lol

Edited by 51NNA

Stao, sign me up, do you need a PM with details again? Or you can deliver to Jez, as I'll be asking him to fit and retune, hopefully able to pick up another 20kw and hit my 280rwkw goal? :D :D :D

Stao I will grab one of these too please. Might as well do it now before fitting the engine to the car and finding out the hard way

And the cruise home from Jez's was awesome, I'm hell stoked about how the turbo feels. Stao is right, except for a little bit at the bottom end it feels just like a small block v8, just put your foot down anywhere and it pretty much just takes off!

Also a testament to how well Jez tunes, even with shitty stop start north shore traffic I managed to average 18.2L/100km, which is half of my old average doing that trip!

Jez, I'll keep you posted on how it goes for economy, but I've definitely already noticed the difference!

Finished up at this.

Tao this is with an eboost 2 trying its hardest to keep the boost up. What are these new actuator arms u have. Have u tested them?

7d3697a8.jpg

Gee, hold an extra ~3psi boost all the way to redline and that thing will be even pokier! 260 at the top is a bloody nice figure, especially for an auto.

Autos are great for responsiveness, but they lack the all important fun pedal :)

Today we've did couple of runs on a smaller and more dynamic version of the SS1PU. How ever responsiveness gained is based on the lose of top end power, So it will remain as a prototype for the time been. The more responsive runs are from today.

power.jpg

The "dynamic" SS1PU seems a little "why bother?" Unless my eyes are deceiving me, it's brought the boost on 400rpm earlier but lost >30kw off the top? I know which I'd rather :)

Well just got the phone call from my tuner...

Ecu is corrupt. Absolutely no idea what happened, tuner says it looks like it has arced out somehow. But I had the battery out the entire time and didn't touch any wiring except for the injector plugs.

Anyway, means my results will be delayed. Also means I need to find a replacement ecu, so it's not going to have the new Stag image which means I'm going to get all the DTC's again and no VCT. Why the f**k am I into cars again??

ive got a manual s2 c34 stagea ecu here if that helps.

Bit far away unfortunately, but if we can't find one local I'll keep that in mind mate, cheers.

Sorry to hear man. Welcome to the life of cars

Yehhh :( makes me a bit glad I don't have a VIPEC or a link or something like that. Imagine if one of those expensive ECU's just gave up on you :/

Sale the nistune with z32 arm and get the adaptronic. I'm doing the same.

Tuner doesn't like Adaptronic. It would be a Link or a VIPEC if anything, but this has nothing to do with NIStune. I imagine that whatever has arced out would have destroyed any ecu, doesn't matter how expensive it was.

How did u fry the ecu? Welding?

Nope. I have no idea hey. I didn't touch anything except for the plenum and the fuel system. Removed the battery before we started and the only wiring we had to do was for the new injector plugs and extending the IAC valve loom.

It's not physically fried, everything is just corrupt. He can't even get it started because every map is just blank. He tried uploading a base map and tuning again from scratch but it does nothing, whole ECU is completely corrupt.

Why not??

Don't know, I didn't ask. I just mentioned it in a list I had and he said no, the only ones he was keen for me to go for were the NIStune, VIPEC/Link or a PowerFC.

Edited by Hanaldo

Bit far away unfortunately, but if we can't find one local I'll keep that in mind mate, cheers.

Yehhh :( makes me a bit glad I don't have a VIPEC or a link or something like that. Imagine if one of those expensive ECU's just gave up on you :/

Point is generally they dont.

R34 nistunes are hell stable, get your ecu back to Pete / Matt @ nistune they can bench test allot of the ecus.

i have a 360rwkw auto R34 in at the moment and i have only just started coming into a few issues, we are just coming into issues with the big plenum and e85... not enough accel pump adjustments to overcome a lean stumble onto stall etc but its at the extreme end of the remap scale. Was fine with std intake.

Point is generally they dont.

R34 nistunes are hell stable, get your ecu back to Pete / Matt @ nistune they can bench test allot of the ecus.

i have a 360rwkw auto R34 in at the moment and i have only just started coming into a few issues, we are just coming into issues with the big plenum and e85... not enough accel pump adjustments to overcome a lean stumble onto stall etc but its at the extreme end of the remap scale. Was fine with std intake.

That sounds like it would be wicked fun

The "dynamic" SS1PU seems a little "why bother?" Unless my eyes are deceiving me, it's brought the boost on 400rpm earlier but lost >30kw off the top? I know which I'd rather :)

Yes excellent on road. Feels like boost building up from 1RPM. Don't makes the numbers how ever. SS1PU core, slightly different FNT arrangement in the rear housing. Its 6 degrees of timing less compare to the standard turbine housing. How ever I think this FNT arrangement would be perfect for the current G3 since 330rwkws @23psi is not very archivable on stock manifold and button end.

Gee, hold an extra ~3psi boost all the way to redline and that thing will be even pokier! 260 at the top is a bloody nice figure, especially for an auto.

Autos are great for responsiveness, but they lack the all important fun pedal :)

The "dynamic" SS1PU seems a little "why bother?" Unless my eyes are deceiving me, it's brought the boost on 400rpm earlier but lost >30kw off the top? I know which I'd rather :)

If you drive a car with a GT-RS, 2835ProS and GT3076 you will understand what a smaller turbine brings to drivability vs peak hp number.

I am guessing that an SS1PU is going to deliver instant response on the street vs a larger throttle input to get the car to move.

Point is generally they dont.

R34 nistunes are hell stable, get your ecu back to Pete / Matt @ nistune they can bench test allot of the ecus.

i have a 360rwkw auto R34 in at the moment and i have only just started coming into a few issues, we are just coming into issues with the big plenum and e85... not enough accel pump adjustments to overcome a lean stumble onto stall etc but its at the extreme end of the remap scale. Was fine with std intake.

Yeh I will see how my tuner goes on Monday, he is going to try to source a new one for me then. If he can then I will just pay for it because I'm impatient. If not then he is closing down until the 21st of May as he is getting married this week, so I'll have time to send the ECU back to Matt. I've contacted Matt to see if he might know what could cause the corruption, as everything was perfect a month a go when I last drove the car. Installed the Plazmaman and ID1000's and now it's busted :(

And the cruise home from Jez's was awesome, I'm hell stoked about how the turbo feels. Stao is right, except for a little bit at the bottom end it feels just like a small block v8, just put your foot down anywhere and it pretty much just takes off!

Also a testament to how well Jez tunes, even with shitty stop start north shore traffic I managed to average 18.2L/100km, which is half of my old average doing that trip!

Jez, I'll keep you posted on how it goes for economy, but I've definitely already noticed the difference!

I would suggest swapping the BKR for BPR7ES and see if it will take more timing. The BKR's were an issue last time on the dyno .

Yes excellent on road. Feels like boost building up from 1RPM. Don't makes the numbers how ever. SS1PU core, slightly different FNT arrangement in the rear housing. Its 6 degrees of timing less compare to the standard turbine housing. How ever I think this FNT arrangement would be perfect for the current G3 since 330rwkws @23psi is not very archivable on stock manifold and button end.

What numbers do you think an FNT G3 would achieve?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...