Jump to content
SAU Community

Recommended Posts

Those wastegate studs you are inserting will reduce the area of the wastegate making boost creep uptop same as if you've got an wastegate that is too small. Except the extend of creep is fully controllable. Insert a stud at once. Method is debatably but I've used it quite often at trents and it appears to be working well.

Also an update. This is the very first billet SS1PU core that we high flowed into a M35 Stega's OEM turbo for a Scotty's customers. The car made 300rwkws on the auto with E85 at about 20psi of boost. I'll still need to take acount in modifying the OEM wastegate assebly on those for better boost control using this core. Will upload dynosheet later.

hey there im the one u did the turbo for, car is just on caltex eflex not e85 so there is abit of room for improvement but i wont be taking that path scottys going down that path :P mine was actualy done in 4wd not rwd as i didnt have the shaft out as im a lazy bastard im very happy with how it came out its not laggy at all and ive been driving it heaps done 400kms already and it drives very much like a standard car cruises well etc but with the boot into it its just insane very happy with the result of it, i got a little vid of it as it was ramping up on the dyno it got to bout 306-307kw from what i can see but it averaged out to the above dyno graph which im more than happy with as i dont want to blow the driveline thats why i didnt want more boost into it. but none the less im extremely happy thanks again to sao and scott for all their help

Edited by sky^rkt

Further update on the SS1PU Prototype:

This is latest design using FNT .G3 turbine housing and I've trailed it with a SS1PU core. The aim is for better consistency as larger turbine housing don't creep as much heat.

After tailing handful of different FNT nozzles arrangements, this one generated the best result. It has slightly more down low, same power but much heavier punch. I'll be using this on the G3 core next, and hopping to see 300rwkws on pump with much better response.

This is also the first result based on my new Adaptronic plugin ECU, as I've removed the Nistune with Z32 AFM. Big thank to Trent contribution extra time getting every thing running 100%

power.jpg

boost.jpg

Will be retuning elusivitys car tonight with the mods Tao has recommended to help hold the boost up high RPM. Let u guys know tonight

What else did recommend besides the wastegate extension?

Interested to see if it can help hold boost up top!

What else did recommend besides the wastegate extension?

Interested to see if it can help hold boost up top!

Actually rather than the wastegate extention he recommended 2x M8 @ 50mm allen key head bolts to replace the grab screws in the rear housing, he reckons the theory is the same, more clamping force on the actuator, should keep the wastegate closed later and help hold it up at the top. For $1 each, it'll be an awesome upgrade if it works!

Im fairly sure the grub screw reduces the effective waste gate size by blocking some of its flow path

Stao should jump in right about now lol

My fully sick JJR strut brace doesn't fit back on with my PU highflow (even when i bent the shit out of it) because all of the I/C piping sits about an inch higher than stock...

Anyone know of an R33 strut bar that has more clearance?

Cool story, right bro?

My fully sick JJR strut brace doesn't fit back on with my PU highflow (even when i bent the shit out of it) because all of the I/C piping sits about an inch higher than stock...

Anyone know of an R33 strut bar that has more clearance?

Cool story, right bro?

I think you've done something wrong...

Custom piping would have been easier, or rotating the housing if possible to help fit the stock pipes? I don't think bending the strut brace will help much. lol.

Some updates regarding to the Electric turbo. lol.

Now running duel roller bearing with 44V 6KW motor spooling up to 48000RPMs. Its makes very strong thrust. If i'm holding it on a skate board I'm pretty sure it will push me forward. Should've thought of making it into a back pack for a bicycle.

Since its working I'll be testing it on E85 in about 2 weeks time.

font1.jpg

front2.jpg

I think you've done something wrong...

Well, thank you for the productive feedback. I think (and am happy to be corrected) that the turbine housing on this turbo is a different size/shape than the standard one. It seems to me that this difference in size/shape has caused the compressor housing to sit higher than the standard one. Thus, the outlet elbow and crossover pipe also sit a little higher.

But you're right, I've probably just assembled the whole thing upside down...

Custom piping would have been easier, or rotating the housing if possible to help fit the stock pipes? I don't think bending the strut brace will help much. lol.

Yeah, i was going to clock the housing however the actuator mounting prevents me from moving the housing around the amount I need. The bend in the strut brace almost worked, but it became too short to line up with the strut-top mounting holes! ;-)

So I guess the question is whether it can sustain a positive manifold pressure and, if so, whether it drains more engine power than it gives.

Well, thank you for the productive feedback. I think (and am happy to be corrected) that the turbine housing on this turbo is a different size/shape than the standard one. It seems to me that this difference in size/shape has caused the compressor housing to sit higher than the standard one. Thus, the outlet elbow and crossover pipe also sit a little higher.

But you're right, I've probably just assembled the whole thing upside down...

No need for the sarcasm mate. I'm using a much larger turbo than you and my strut brace fit fine. You are also the first person I have seen complain of this problem, ergo you've done something differently to everyone else. Unless Stao has positioned the housings wrong.

What elbow are you using from the compressor outlet, silicon? Can you upload a picture to show what exactly the problem is, maybe I'm picturing it wrong?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...