Jump to content
SAU Community

Recommended Posts

Stao, something that hasnt come up in a while: Variable Geometry turbos

I think last time you talked about this it was on hold due to the complexity of the task (Understandable of course) but was just wondering if theres plans to do anymore development with these this year.

In a manual we don't usually sit on the 2~3000RPMs range, how ever the autos do use that quite often and with the long gear ratio and high drive tran lose, It acts as if it needs a tinny baby turbo down low with a huge turbo up top.

Unfortunately any thing smaller on the exhaust side is going to sky rocket upper range EGT while smaller comp will reduce top end power.

Roller bearing has no effect on the SS1xx series as the bear friction in those are already sit to be minimum. It probably need a VNT valve in the exhaust housing. I might be able to get that working and driven by an actuator.

Is there a twin scroll housing option for the ss1PU?

.... you know where I'm going with this :-)

cheers

Justin

f**k yeh...a hypergear makes it to the drags..haha

and nice work scott, sound like a fun setup

cheers

darren

Here ya go man, 13.6 at 176kph. Just couldnt get the thing off the line nicely last night. Will post some videos later of what i mean.

Need to track down a weighbridge.

Have a full tank and nothing extra in the car that you wouldnt have when your at the drags.

Plenty of public weigh bridges around Perth, Landscribble.

Has anyone heard from Stao, sent a couple of emails off regarding eta on my turbo, haven't heard from him since mid last week.

Yea might do Martin. I wonder if i could adjust the rear spring settings to make it less stiff, would that help with axle tramp? I had the dampers wound all the way down (soft). The launch control wasnt doing me much good with mickey thompsons on. Rpm limit set to 4000, dumping the clutch it would grip within a second and just bog down at 2500-3000rpm, i dont get any power until 4400 lol..

Yea might do Martin. I wonder if i could adjust the rear spring settings to make it less stiff, would that help with axle tramp? I had the dampers wound all the way down (soft). The launch control wasnt doing me much good with mickey thompsons on. Rpm limit set to 4000, dumping the clutch it would grip within a second and just bog down at 2500-3000rpm, i dont get any power until 4400 lol..

With Mickey Thompsons try closer to 5500rpm launch mate.

having the dampers set all the way down isnt necessarily helping. thats not how suspension actually works.

you want the car to absorb some part of the power and to squat plus stay squatted.

having your damper set to zero is just gonna let the car bounce and rob you of power off the line whilst inducing wheelspin.

turn the dampers back up until you can feel the car solidly squat and stay down on a decent launch. A nice firm squat, not a free fall to the floor.

Here ya go man, 13.6 at 176kph. Just couldnt get the thing off the line nicely last night. Will post some videos later of what i mean.

Must not making alot of power atm for that mph, Stao should take his to drags..should do upper 120's...

cheers

darren

Yea might do Martin. I wonder if i could adjust the rear spring settings to make it less stiff, would that help with axle tramp? I had the dampers wound all the way down (soft). The launch control wasnt doing me much good with mickey thompsons on. Rpm limit set to 4000, dumping the clutch it would grip within a second and just bog down at 2500-3000rpm, i dont get any power until 4400 lol..

What was your 60ft? With worn semi slicks and circuit spec Bilsteins I ran a 12.9 @114mph with a 2.2 60ft with about 234rwkws. I didnt launch the car hard as was worried about std RB20 box. Just ride the clutch and touch the limiter in 1st if you are getting wheelspin and shift smoothly, not snatching or you just rip skids :)

LOL, thats my advice having done all of about 10 qtr mile runs in my life :) (oh my car weighed 1345kgs with 10L of fuel in it at PI weighbridge)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...