Jump to content
SAU Community

Recommended Posts

Run your ball bearing cores with your new billet TD06s, I'm sure that will turn plenty of eye balls.

That can be done. As long as it increases response without the singing the Dingo bell song like Trent's 2530 then its good :P .

I hope this is the right place and apologies if this is covered in a FAQ somewhere, I couldn't find it. Btw the car is an R34 GTT auto with a stock turbo and Nistune, currently at 200rwkw.

With a power goal of 250-280rwkw, and good response rather than outright peak power, what's the difference between an SS2 highflow and a comparable ATR bolt-on turbo? Pricewise they seem roughly on par and the supporting mods would be very similar, is that correct?

Since its a OP6 R34 turbocharger, standard high flow will get you goal with pretty decent response.

Thanks Stao. Would one of the ATR profiles offer a comparable response? Just in case I wanted to keep the OEM turbo as is for putting things back to stock later.

For this power range on the SS1PU would be a pretty responsive turbo for your application. That generally makes around the 260rwkws mark in a manual, I'm unsure the Auto/Manual trans lose as I haven't had results of it from a Auto yet.

Alternatively you can use the SS2 it is not as responsive, but still reasonable, and I've had two customers making 260rwkws on autos. Reference:

http://www.skylinesa.../page__st__2440

and

http://www.skylinesa.../page__st__4800

This is another interesting point. J-Rod made 340rwhp with his G2.5, and I beat him in all the runs we had.

J-Rod. Get your car to Kwinana, I want a comparison! :P

I actually went to the drags as soon as i got my car tuned.

I dont have the sheets anymore but i believe i was getting a poor 14.4-14.6 (not 13)

I really suck at launching from stand still.

( might not even be that it was a while ago )

Once i get my 255s on the back im going to goto the drags to practice launching for race wars :)

Edited by jay-rod

I actually went to the drags as soon as i got my car tuned.

I dont have the sheets anymore but i believe i was getting a poor 14.4-14.6 (not 13)

I really suck at launching from stand still.

( might not even be that it was a while ago )

Once i get my 255s on the back im going to goto the drags to practice launching for race wars :)

What sort of trap speeds were you getting?

any one tried to launch in 2nd gear. wouldn't get get rid of the wheel spin in fist and saves gear shifting time?

Puts a lot of strain on the clutch so make sure you have a good one before doing this

I was walking the car off the line with about 3, 000rpm and was a long way from a launch as I was protecting my clutch and gearbox. Even with 2.3-2.5 60ft times I was still running between 12.9 and 13.5 with 234rwkws from a torqueless RB20. My car is 1335kg plus driver with 15l of fuel.

Why are so many cars with 250rwkws in the mid 14s? Is it the way they make power or torque falls off?!?!?

any one tried to launch in 2nd gear. wouldn't get get rid of the wheel spin in fist and saves gear shifting time?

Basically if you launch hard enough so you dont bog down you light up the tyres hard and if you dont light them up youll bog so doesnt really help.

Why are so many cars with 250rwkws in the mid 14s? Is it the way they make power or torque falls off?!?!?

I can't imagine how people are ending up with those times, as I'd mentioned earlier I let a mate drive my car before it was tuned for more boost (probably making 260-270kw @ hubs with a GT3076R at the time) for a single run after I had pretty much hit a wall for the day at mid/high 12s - he had a stock turbo R33 GTS25t and ended up launching at too low rpm, completely bogged then when it hit full boost it lost traction/revved out like a demon compared to a stock turbo then he had a bit of a freakout going for second and ended up in neutral, took a couple of shots and third then went on his way. That lot still resulted in a 14 flat, which was the only 14 the car ran with the GT30R on it in the 4 years it was on the car.

The rest were 12s, low 13s and the occasional mid/high 13 I did on complete fails - I am curious as to why these are resulting in average times and lower-than-expected trap speeds. Are they internally gated? Perhaps they don't build as much boost on the road as on the dyno or something - like the boost builds more lazily or something?

The rest were 12s, low 13s and the occasional mid/high 13 I did on complete fails - I am curious as to why these are resulting in average times and lower-than-expected trap speeds. Are they internally gated? Perhaps they don't build as much boost on the road as on the dyno or something - like the boost builds more lazily or something?

Mine is externally gated, I believe Luke's is still internal.

Yep, mine is internal with a hybrid lowmount manifold and tomei 256 poncams . watching it lately its making 17psi by 4500 and holding to redline (7500 i think).

You need an SS2. I'm hitting 17 around 3500

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • 2 spots that my exhaust guy joined the 2 pipes together  Made a big difference. I'm now able to live with it. I can make it louder if I want by removing the HKS caps.
    • Hi all, considering clutch upgrade to support 1130 engine hp from 1650cc injectors on e50 at 85% duty cycle (1650 x (11.85/14.7) x 85%). Narrows down to these three as they can be converted to use gm 26 spline input shaft if I ever want to use transmission with that input shaft (orc1000f and r3c easy/cheap just change center hub; tr2cd pricier must change clutch discs). Pricing orc1000f similar to tr2cd, r3c about usd 200 pricier. Orc1000f triple plate 200mm. Tr2cd twin plate 215mm. R3c triple plate 215mm. Claimed max torque : orc 1000f 723 lbs ft; tr2cd 800 lbs ft; r3c 1100 lbs ft. Why orc1000f triple plate but claims lower max torque vs tr2cd twins? Is orc1000f underrated? Any info maxing out these clutches? Info on street/traffic driveability/pedal feel? Thank you for any info on them.
    • Some troubleshooting, connect up a timing light/gun with a proper ignition lead on coil 1. Hold the revs at 4~4500rpm and see if your timing is all over the shop, scattering off its tits. If so, there's a high chance your CAS is fked. But I read you have a Link ECU ready to go in, why not just skip all this and put that in - will make troubleshooting so much easier.  
    • Misfires when the car is fully warm are generally attributed to the coils (and/or the igniter, on cars with a separate igniter). They can stop working properly when they get hot for a number of reasons. Either electric/electronic, or from thermal expansion opening up gaps and allowing HV leakage. Seeing as you have replaced the coils, that could/should rule them out. But I wouldn't always assume so. Were the coils genuine? Or is there a chance you have bought some counterfeit Chinesium shit? Then we're back onto loom connections. They can fail when warm/hot for the same reasons. Inspections, cleaning of contact surfaces, ensuring that terminals are fully inserted, etc etc, are all justified. The same (heat effects) holds true for the other electrics and their connectors. AFM & CAS, primarily. If you try that Chinesium AFM, drive it around on low load until it is properly hot, but do'nt give it more load than you have to, except when you need to see if it will still miss. I'm dead serious about the untrustworthiness of the calibration of those copy AFMs. Injectors are unlikely to get hot unless the fuel is coming back around hot. You could try squirting them with compressed air or freeze spray to cool them back down to see if they are maybe the cause.
    • Alright, all the plugs looks good. Noticed that it starts to get bad when the car is up to temp, that's when things starts to misfire hard. next to do is Injector cleaning and such. Got in touch with a shop to do work on the injectors next Monday also help on diagnosis.
×
×
  • Create New...