Jump to content
SAU Community

Recommended Posts

Pretty sure they are all based onE85 runs are on External gate with high mount manifold.

Recent results are, yes.

But the G3 is an 'old' design. Original results (the ones I used when I bought my turbo) were on the stock manifold, internal gate, and 98 pump fuel. Just wanting to see if I can compare my turbo to these results without estimating, I don't think I can.

Highmount/external by looks, i want to see internal gate 56T vs 58T on stock manifold, thats what most people have/buy..

Also going back to the 56t, originally you where saying the 58t needed cams for more power from memory,

but going back to 56T and still giving samish results, have you actually run out of turbine flow?

cheers

darren

Doubtful... Its close to a 90 trim 60mm wheel.

Just want to give Stao some props on his turbos. I recently installed an ATR28G2 SS1PU to my sr20. Car has 180k and is unopened with all the usual bolt on's. I was running 18 psi and getting 226rwkw, no cams and it felt pretty good. I just whacked on a bellmouth dump and upped pressure to 20 psi and the car pulled 236rwkw.

What really blew me away was the change in mid-range from about 4500rpm, it feels like a different turbo, noticeably more torque. I winder what it will do with cams, New HG, head studs and 24 psi?? All I can say is great product, great performance and great price,keep up the great work Stao..

great to see another good SR SS1PU result!

who tuned it Morgan?

Tom at PZP. That guys awesome, knows his stuff and always has the time to answer questions.

I cant recommend him enough.

Highmount/external by looks, i want to see internal gate 56T vs 58T on stock manifold, thats what most people have/buy..

Also going back to the 56t, originally you where saying the 58t needed cams for more power from memory,

but going back to 56T and still giving samish results, have you actually run out of turbine flow?

cheers

darren

The turbine can flow plentiful, it is a larger trimmed turbine originally engineered to use with small housinged high flows.

With the stock exhaust manifold, I can't get any thing pass 322rwkws on e85 (-40kws=98 power), and that is a SS2 turbo making 375rwkws on a proper high mount externally gated. So there isn't much more I can do apart from modifying the actual manifold or build turbos that shifts boost curve band n forward.

To compare result with pump 98 internally gated simply:

Power:

High mount E85 result - 40Kws from E85 - 15Kws External gate

So the new G3 would make:

376 - 40 - 15 = 321rwkws On pump 98 internally gated with a free flow exhaust manifold and exhaust setup.

Using factory manifold it will cap maximum power output to the 280rwkws mark. But

Factory log manifold produces better response, in comparison by 150rpms. So G3 can do 280rwkws @ 20psi by 3750RPMs.

Latest G3 results look unreal... :woot: are ther still plans for a 73mm comped td06 l2.

Nice work Stao

Probably a 76mm wheel with complete G3 housing assembly. If I can get the SL2 to produce 376rwkws without revving passing 7000rpms with 20psi by 3500rpms would be pretty sweet.

Just want to give Stao some props on his turbos. I recently installed an ATR28G2 SS1PU to my sr20. Car has 180k and is unopened with all the usual bolt on's. I was running 18 psi and getting 226rwkw, no cams and it felt pretty good. I just whacked on a bellmouth dump and upped pressure to 20 psi and the car pulled 236rwkw.

Thanks for the feedbacks. Will be looking forward to see you results with some cams.

Probably a 76mm wheel with complete G3 housing assembly. If I can get the SL2 to produce 376rwkws without revving passing 7000rpms with 20psi by 3500rpms would be pretty sweet.

That sounds good.cant wait

Didn't that fab dude that does all the lobster pipes, go a a easy 350rwkw on 20psi on standard mani on a G3 on E85

ages ago?, now he has a ss2 , and he wasn't the only one?

Out of interest any thoughts why do you think the 56t performs so well compared to 58T if your not out of turbine flow and theres no restrictions else where?

cheers

darren

Edited by jet_r31

Yes that is Abe. He's spent lots of time die-grinding all the ports of the stock manifold. Can't get his result with a stock manifold.

58T in theory should be making more because it has larger inducing area. How ever the car was out dated for a service using 8000km old engine oil. Recent runs were done straight after a service. Have to admit my car drove heaps better with fresh oil too. That part is arguable.

My main concern is better transition and throttle response, and the current version satisfy that criteria.

I'm going to try out the atr28g2 soon on my sr20det soon once I get a fnt housing off stao big boost 22 to 24 psi e85 Poncams

Just want to have one more run to see the best time I can get with the kando and Ill do the turbo swap over

Hopefully it will make similar power than I am now on less boost and better response cause the fnt and bigger compressor than the tdo5h18g

I'll get Unigroup to print me a back to back comparison and post it up once done and I'll be testing it put at wsid aswell

Edited by hy_rpm

Yes that is Abe. He's spent lots of time die-grinding all the ports of the stock manifold. Can't get his result with a stock manifold.

58T in theory should be making more because it has larger inducing area. How ever the car was out dated for a service using 8000km old engine oil. Recent runs were done straight after a service. Have to admit my car drove heaps better with fresh oil too. That part is arguable.

My main concern is better transition and throttle response, and the current version satisfy that criteria.

Yeh i 100% agree you've done the right thing, just had me a bit puzzled on the outcome really

cheers

darren

Ok. as already been posted in the 400rwkws group, I've also trailed the ball bearing ATR45, or also called the ATR43 G4 profile for the Rb bolton series. This turbocharger is not responsive but ended up making 431rwkws @ 26psi. Pretty scary, foot down in 3rd and 4th, feels like the incoming air resistance is about to tear the whole car apart. It jumps from 120km/h to some where around 210km/h (stock cluster) in a blink of an eye. The RSR tyres held pretty wheel with a little wheel spin in 3rd and held all the way through 4th. mid top torque is crazy. I think this turbo can pull some series quarter mile times.

Dyno sheet:

atr45power.jpg

atr45boost.jpg

Tuning video:

I've pretty much decided to go with a Hypergear highflow service for my car, but wanted a bit of final confirmation/recommendation before I proceed...

The car:
'99 C34s2 RS4-S Stagea

Mods:
Greddy Front Mount Intercooler
3" Full stainless steel Fujitsubo exhaust and stainless steel front pipe with 3" Venom 200cpi hi-flow cat
Nistune ECU
Turbosmart Boost Tee
Nismo High-Flow Volume Fuel Pump
HKS Panel Filter

Possible future mods: Z32 AFM and larger injectors

My thoughts are to go for the PU Highflow service, to give me some headroom for future mods. Is there a better option?

I'm looking for good response and useable power. The car is my daily driver, not a track car.

See below the graph from my most recent tune...

Also - I'm on the look out for an OP6 to send in for this, so that I can keep driving my car.

Jaustechdyno22012013_zps1e67fb92.jpg

Edited by Marshstag

I think the SS1PU is abit small for the Stagea as the engine is tolling a much heavier car. I think the billet SS2 or the roller bearing G3 would be a perfect turbocharger for this vehicle if it has to be a brand new turbocharger. Alternatively highflowing standard OP6 turbocharger is also a good option.

I'm in a similar boat (geddit, boat? :D ) and will go the SS2 or, more likely, G3. It's not a daily so I'm not concerned about lag which is why I'm leaning towards the G3.

I just need to sort out my injector choice before buying the turbo. My kingdom for a simple 1000cc injector solution for a Neo!

I just need to sort out my injector choice before buying the turbo. My kingdom for a simple 1000cc injector solution for a Neo!

What's so hard to work out? The Neo is already 14mm topfeed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...