Jump to content
SAU Community

Recommended Posts

I tow with my D40 Navara 2.5td manual, it rocks, fuel consumption is heaps good on highway runs, normal non towing I get 10L/100ks and when towing I can get 14L/100 maybe more if its alot of around town towing...

comfortable and drives good and handles 4WDing prett well just needs a lift kit if your into 4wd heaps...

stx or st model for all the interior electrics...

you can buy mine off me for $20K, I want to get a brand new one...

Lmfao :)..... yeah don't listen to me, but I maintain a 3.0l pootrol is appalling, and yes I've driven them. A td pajero would in fact wipe the floor with one.

Not sure why you'd want such a truck (pootrol) for a mere 2500kg?

Bang on Marlin. I am on my 7th patrol and boy am i glad I avoided the shitbox 4 cylinder. Biggest mistake nissan ever made.

Fwiw Mark my current patrol is the 4.8 petrol variant. Paid plenty for it when I first bought it but you can pick them up for dirt these days. Initially I couldnt live with the fuel economy. It was shit but some minor mods saw a marked improvement. A good header system with a 2 & 1/4 inch exhaust , and a dyno tune with an after market ecu saw not ony a huge improvement in fuel useage but a nice gain in grunt to boot. Mine is the TI variant so it has all the frilly bits to make it a civilised place to spend your time. Seats are marginal but other than that it has all the fruit.

As my work vehicle it works its arse off most days towing my tradey trailer and some heavy loads and when it isnt working it gets its arse thrashed off. Nothing slows it down to any degree including a heavy arsed hire trailer with the skyline on board and economy doesnt vary by as much as I thought it would between towing and non towing.

The tiptronic box has never complained in 5 hard years and like all my patrols before this one all you can spend on it is the usual service items and a brake pad change at around 80 k intervals.

Highly reccomended.

  • Nope 1

very hard to find the 4.2 TD's out there!

am looking at a 99 GU 4.5L Petrol Pootrol Ti with extremely low km's offered to me by the dealer who sold me the R35. Damn thing is like new inside and out. tempted...

Can't legally tow 2500.

Capable, yes. Legal? No. :(

my truck can legally tow 2.5T, as long as its braked, it says it on the tow bar and on the inside of the door.... i dont no what you are talking about.....

and yeap they are super hard to find in a 42tdi, it took me ages to find my one, i traveled to get it and payed the price for it, but in the end i got the best truck i could buy and i love it, takes the load for work, gose well, dosent drink fuel like my old Navara (4L v6), and tows the GTR like a dream. plus i got the ST model so its got all the electrics inside plus the carpet and sounds deader, and most of all Coil springs all round!!! not many utes that run that!! and if your worried about taking weight you just pump up the air bags with the on board compressor

: D

oh yea, and the 3L patrol.... = fail hense why people go here http://www.brunswickdiesels.com.au/new/stories.php

6.5L Chevy!!!!! you can get the NA version or you can get the TD version..... i kinda wish i brought the 3L and got the conversion.... woulda came in at the same price basicly

If or closer to 10 than 20 grab it up Handbrake.

I sold a '98 ST 4500 petrol manual done under 100k for 14k in 2005 so a similar Ti couldn't be worth any more now surely?

Still a lot of truck , If you need that much truck.

The 99 Ti GU has 14,300km on it. Japanese businessman owned it. locked in his gold coast 'mansion' - only drove to church once a year sort of thing with no off road use. apparently even smells new. the dealer selling it sold it to him originally.

will check it out. They are a major nissan dealer (nissan HPC) so their vouching for the Km's being genuine must mean something. I guess I will know when I see it.

do I need that much truck? Thinking of towing the 2.5 tonne worth of GTR and extras around 12-20 times a year and maybe some interstate trips. might even take it off road too. I don't know what would scare the sh#t out of my wife more. a track session in the R35 or an off road session in a 4WD.

gallery_56949_4119_12070.jpg

Ummmmm, was replying to the Crewman suggestion champ ;)

Yer they can Ben, they use the one tonner diff and the larger trans cooler from factory that is why I purchased it. It is only for the auto though the manuals can only tow 1600kg???

You guys know this, but at 2500kg GTM (gross trailer mass), you need to have 4 wheel braking on the trailer, and a separate breakaway braking system. I don't know of any hire trailers that have these features, as they are all rated to 2 tonne GTM.

Without this, you're towing illegally regardless of what your towing vehicle is rated to tow.

Just sayin'

and yeap they are super hard to find in a 42tdi, it took me ages to find my one, i traveled to get it and payed the price for it, but in the end i got the best truck i could buy and i love it, takes the load for work, gose well, dosent drink fuel like my old Navara (4L v6), and tows the GTR like a dream. plus i got the ST model so its got all the electrics inside plus the carpet and sounds deader, and most of all Coil springs all round!!! not many utes that run that!! and if your worried about taking weight you just pump up the air bags with the on board compressor

: D

in the utes? all the cab-chassis are 4.2 until 2007/8 when they no longer met emissions and got the 3.0. And they were all tdi from 2002. Its the wagons that are hard to find in 4.2 and cost twice what they're worth. I've seen 2yo seconhand ones with 100,000km on them for more than a brand new 3.0! piss off.

If you don't want the 3.0 (which don't fail anymore than Pajero DiDs, for example) then the petrol on gas is the go. 4.2 GU Wagons are a complete rip off and the slowest lump of a 4WD you can buy. You'd be far better off buying a 100 series 4.2 turbo Landcruiser.

Edited by hrd-hr30

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
×
×
  • Create New...