Jump to content
SAU Community

Recommended Posts

My mechanic was insistent that it would work better with the clutch I'm getting. So I just told him to go for it.

I was going to get one anyway. Less drivetrain loss :)

Car is predominantly a daily, but used for hill climbs and track days too.

Trying to get a good balance between looks, performance and practicality/reliability.

flywheel is a waste of money

I dunno, didn't really like the feel of my Exedy HD, so thought the cushion might be a good change. Spur of the moment thing :P

haha the cushion button isnt all that good for daily driving :P

takes a bit of getting used to, Kris drove my old 32 with the cushion button and even he said was hard

took alot of abuse though, and only died when one of the springs popped out of the centre part, apparently its a common issue on them

Haha good call. He's actually not making money off the clutch. That's the price that his wholesaler gave him. It's a bloody good clutch though. Definitely overkill for what I need but meh :P

HDCB's are terrible for taking constant abuse (like a full track day). The centre and the ceramic are attached so you can't rebuild them modularly when they wear out, they suck for daily driving and are no more durable than a regular HD.

basically HDCB's are for people who want to feel like they're using a brass button without any of the durability or benefits.

You either buy an HD which is cheap to maintain, gives good grip and slips enough to daily drive, or you get your balls in a bunch and buy a brass button. HDCB is for fags.

Heavy flywheel + snappy clutch = good

Light flywheel + snappy clutch = shockloaded drivetrain

I run an exedy lightened wheel in mine, with a 5 puk. Love it.

Fantastic for track work. Doesn't get driven on the street a whole lot, but when it does its a ball.

To be honest I didn't notice the difference between gears, there is a definite pickup in revs while while under load though.

leigh fix coilpacks and then check it, if the coilpacks misfire i wouldnt bother trying anything else. Where do u live? Do u want me to check it

yeah i'll wack coilpacks in first and see how it goes. I live near Knox but yeh will see how the new coilpacks go first

HDCB's are terrible for taking constant abuse (like a full track day). The centre and the ceramic are attached so you can't rebuild them modularly when they wear out, they suck for daily driving and are no more durable than a regular HD.

basically HDCB's are for people who want to feel like they're using a brass button without any of the durability or benefits.

You either buy an HD which is cheap to maintain, gives good grip and slips enough to daily drive, or you get your balls in a bunch and buy a brass button. HDCB is for fags.

Heavy flywheel + snappy clutch = good

Light flywheel + snappy clutch = shockloaded drivetrain

this.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
×
×
  • Create New...