Jump to content
SAU Community

Recommended Posts

Pardon if already mentioned but I couldn't find what ECU you are using. Still stock?

It's using a PowerFC which runs everything well. I do want a racepak iq3 dash as a silver bullet for engine monitoring, shift lights, logging etc which won't work with it. Might be able to direct wire it but not a nice neat solution.

Engine monitoring is high on the agenda at the moment.

Hope the tune goes smoothly. :)

Cheers me too!
  • Like 1

I think Links also do something similar to an IQ3 that would probably plug and play with their ECUs..might be worth looking into. I imagine your PowerFC would sell easily if you were keen.

EDIT: Looks like Haltech have an IQ3 as well..

Edited by nk7

I've just started fitting 1 of these to my GTR, good thing thus far, use's cheap Bosch sensors, and is 100% stand alone.

mine was $736 with the exchange rate at the time,

http://www.race-technology.com/dash2_2_31.html

I've just started fitting 1 of these to my GTR, good thing thus far, use's cheap Bosch sensors, and is 100% stand alone.

mine was $736 with the exchange rate at the time,

http://www.race-technology.com/dash2_2_31.html

Not bad. A bit over $850 if you buy locally I believe...

Word is the tune is finished. Some of the near 25 year old coil packs didn't make the cut so a set of split fires have gone in.

Best bit is it was happily making 336/337/338 rwkw which Chris reckons you don't see often with gt-ss on 98, been wound back a bit to 330rwkw @20psi - very happy with that!

Should be picking her up tomorrow arvo.

Awesome to hear it is running and well at that! :thumbsup:

So , have you given any thought to what the next car is going to be?

Halves in an R300 kit that we can throw a S2000 motor in?

Its not the same tinkering on my car and talking to myself. I should never have left Cliff behind in Portugal, he was always there for me and I just threw him away :(

gallery_462_50_10868.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Given you're running a 2.8 and my 2.5 is not really like for like, I suspect there could be a bit more timing you could give it. What is the kW yield per degree you're putting through it? Here's my E85 map to give you an idea, where it was I could still get another 3~4kW per degree thrown at it.  
    • It turns out that Setrab make a fan specifically for the oil cooler which is great and I've installed it with minimal swearing. I removed my 2x 12in push fans from the front of my aircon condenser and wired them into this. My main thermo fans kick on when I use the aircon anyway and would effectively already be working as puller fans through the condensor which is infront of the rad. The push fans (understandably) didn't really do much in the config they were previously in so now they're out. Now we're on to the "Oil fan doesn't really do much either!". Yes I'll duct it next if it does nothing in heavy use which it shouldn't. But hey, the object exists and fits great and is cool. Let me have this. The car is still in the "do my fittings leak oil now? do my wheels actually rub?" phase. I did a spirited drive on them and didn't hear or feel anything. Then I got back home and noticed there were grind marks on the inside of the rims, though I couldn't see where they were touching I got out the grinder and attacked the suspects. Note: I do not know how to use a grinder. Then I realised I had dragged my new rims across my concrete driveway before I did this drive. I didn't think I had damage at that time when I briefly looked...... but remembered this occurred after I did all the angle grinding. The grinding on the wheels in some very specific spots. It's not around the whole rim for example, which lines up with dragging it across concrete more than hitting a suspension component for even 1 full rotation. So everything is currently painted and taped up and I need to test it some more to see if it really IS rubbing, but from inside the car it doesn't feel like it is. In other news I attempted to do a before and after comparison of the heads/cam upgrade thing. Dynos lie, everything is in different measurements. Here is the data from the sandown back straight. Car go faster than before. Vroom vroom.
    • Here's my base ignition. +3 correction to redline when shooting water/meth which is always on. Looking at my old ignition table, I should be able to add 1-2 degree's next time I'm on the dyno.  Let me know your thoughts. 
    • Given what I know now - same haha, but this was 12 years ago with second hand 740cc Nismo injectors in my S15 daily, I was too busy hunting elsewhere for the issue to even look at the injectors, running through some cleaner was a happy coincidence haha
    • Not a terrible idea. But if I ever had concerns that my injectors were sufficiently dirty to be causing me a problem, they would be out of the engine and onto the actual injector cleaner/testing bench.
×
×
  • Create New...