Jump to content
SAU Community

Recommended Posts

Pardon if already mentioned but I couldn't find what ECU you are using. Still stock?

It's using a PowerFC which runs everything well. I do want a racepak iq3 dash as a silver bullet for engine monitoring, shift lights, logging etc which won't work with it. Might be able to direct wire it but not a nice neat solution.

Engine monitoring is high on the agenda at the moment.

Hope the tune goes smoothly. :)

Cheers me too!
  • Like 1

I think Links also do something similar to an IQ3 that would probably plug and play with their ECUs..might be worth looking into. I imagine your PowerFC would sell easily if you were keen.

EDIT: Looks like Haltech have an IQ3 as well..

Edited by nk7

I've just started fitting 1 of these to my GTR, good thing thus far, use's cheap Bosch sensors, and is 100% stand alone.

mine was $736 with the exchange rate at the time,

http://www.race-technology.com/dash2_2_31.html

I've just started fitting 1 of these to my GTR, good thing thus far, use's cheap Bosch sensors, and is 100% stand alone.

mine was $736 with the exchange rate at the time,

http://www.race-technology.com/dash2_2_31.html

Not bad. A bit over $850 if you buy locally I believe...

Word is the tune is finished. Some of the near 25 year old coil packs didn't make the cut so a set of split fires have gone in.

Best bit is it was happily making 336/337/338 rwkw which Chris reckons you don't see often with gt-ss on 98, been wound back a bit to 330rwkw @20psi - very happy with that!

Should be picking her up tomorrow arvo.

Awesome to hear it is running and well at that! :thumbsup:

So , have you given any thought to what the next car is going to be?

Halves in an R300 kit that we can throw a S2000 motor in?

Its not the same tinkering on my car and talking to myself. I should never have left Cliff behind in Portugal, he was always there for me and I just threw him away :(

gallery_462_50_10868.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...