Jump to content
SAU Community

Recommended Posts

Yeh, but with the plenum and E85 with the baby 256/8.5mm Poncams to try in the stocker with Procams for the built motor, I want to see how long a 300rwkws RB20 will live....my money is a long time...so want the opportunity to test the thinking :)

Not that silly an option Fran!

I'd like to lick it Roy...... you sending it up too? :P

Usual conditions apply... happy to see it go to a good home. Only I want to wait and see if i will need it in case the plenum is crap and all the ravings reviews I have read on them are about as good as some of the other fanboy reviews on parts I have wasted money :)

Its a Plazmaman. Now that I have my SARD 700cc injectors I went to dummy fit it all to my spare manifold and just realised that GTR fuel rails do not fit RB20s. :whistling: So looks like the SARD will be going into the std RB20 fuel rail...i hope they fit :)

med_gallery_462_50_40138.jpg

And some Whiteline rear arms which will take most of the weekend to paint :ninja:

med_gallery_462_50_316572.jpg

dont stress brus, i can get a billet rail made, only need the centre to centre measurements for the injectors and the injector o ring size you want to run. i could even dummy one up here.

heres some pics of some rails we have made.

Its a Plazmaman. Now that I have my SARD 700cc injectors I went to dummy fit it all to my spare manifold and just realised that GTR fuel rails do not fit RB20s. :D So looks like the SARD will be going into the std RB20 fuel rail...i hope they fit ;)

med_gallery_462_50_40138.jpg

And some Whiteline rear arms which will take most of the weekend to paint :ermm:

med_gallery_462_50_316572.jpg

post-20078-1289473956_thumb.jpg

post-20078-1289473983_thumb.jpg

I like the whiteline idea. more info for those that know what it is but do not fully understand teh effects of it.(bear in mind I have hicas and I'm keeping it.)

They are only really needed if you are running sticky tyres and need to run more camber then you can otherwise get out of offset bushes. I like how they still use bushes rather then rose joints. Sure they may not be as hardcore but I am old and dont want noisy suspension, just noisy engine :blush:

Also, the Procams that I picked up out of a blown motor are no good. It seems that whilst the scoring may be able to be repaired the keyway on the exhaust cam which drives the CAS has been snapped off somewhere along the line. SO if someone wants an inlet cam that may be able to be saved, or a pair of Tomei Procams that they want to give to their local cam profiler to copy then if you pay postage then they are all yours.

I will sell you the Tomei solid lifters you require to run with these cams on an R32 RB20/RB25DE :down:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...