Jump to content
SAU Community

Recommended Posts

  • Replies 270
  • Created
  • Last Reply

Top Posters In This Topic

Was looking at getting someone to do full exhaust from turbo back. Would I be right in thinking if I put one of these dumps on then the hardest part for them to fabricate would be done?

nup......hardest part is the suction pipe atm!......I'm pretty sure headers will be a motor out job....if we ever do them!

nup......hardest part is the suction pipe atm!......I'm pretty sure headers will be a motor out job....if we ever do them!

Skirt!

Im pretty sure I could get the manifolds off without removing the engine, but I couldn't get the replacement custom manifold and GT35 back on. Best to drop the engine. Suction pipe is easy mate. :)

I had an issue with the last dump pipe I made, I couldn't remove the nuts on the stock dump, they had been over torqued onto the turbo, the engine will have to be dropped to get a socket onto the nuts in this case.

Skirt!

Im pretty sure I could get the manifolds off without removing the engine, but I couldn't get the replacement custom manifold and GT35 back on. Best to drop the engine. Suction pipe is easy mate. :)

I had an issue with the last dump pipe I made, I couldn't remove the nuts on the stock dump, they had been over torqued onto the turbo, the engine will have to be dropped to get a socket onto the nuts in this case.

Lol he is referring to my car.. looks like the mechanic used a breaker bar n loooooooooooong extension n tightened them good(in this case bad).

Scotty... he said he's gonna drop the engine a couple of inches n put your dump on free. im hoping to get it on there by wednesday-ish but hopefully before the end of the week :)

until then i'll just stare at it. :)

Do I need two?.... :)

I can't use the "my turbo will blow" excuse on the Mrs to get an exhaust.... DAMM! :)

LMAO this is the exact excuse i used on my parents, it wasn't believed, then my Turbo actually blew, so they paid for it hahahahahahahahah

Nothing to do with the boooost level? :)

noooo scotty nothing to do with 20psi with a stock turbo.. nothing at all..i remember dad asking what the little T boost thing was.. i made up something along the lines of. i had a split in the bosst line so i have to use that to control it so too much doesnt go through..

got a reply from the mechanic.. he can only do the dump week after next :)

he's doing it for free so i guess ill have to wait

Edited by AaronNM35
nup......hardest part is the suction pipe atm!......I'm pretty sure headers will be a motor out job....if we ever do them!

Was only talking about turbo back, so custom dump from here, then new front pipe, hiflo cat and new muffler will do it? And most exhaust places could fabricate?

Actually just went out for a crawl under the thing to check what you and others were refering to - not going near the bits before the turbo.

(If I have confusion I am sure someone will set me straight.)

"Someone" suggested as most of the restriction was in the dump, minor "modifications" of the cat/s and replacing dump would get almost as much benefit as a new 3" exhaust? I wonder how they where going to modify it....said something about a hammer.

Anyway put me down for one and let me know exact $ and when pls.

hehe thanks scott.. best investment i made so far getting that complete zorst up here from dump to muffler, as far as mods go thus far,

dont have to deal with any of this bs :P

hehe i always wanted to ask about the zorst manifold wrapping around as such. nice to know its a bitch of a job if we ever wanna go custom.. but alas screw one bank being turbo.

Edited by PetroDola
Have to get my matey onto it. he doesnt work full time at the fabrication shop anymore, so he has to do it in his spare time..

i've told him there is about 7 or so interested in it so hes pretty keen to get it started.

G'day Angus.

How are we looking on numbers now? By my rough count there's at least 10 people interested.

Mate, that's EXACTLY what I wanted to hear. I'll do some dodgy maths now to show how the dump pipe mod will pay for itself (better fuel economy) in X months and with no downside how can she say no???

Any chance of showing how this dump pipe will benefit fuel economy, and reduce costs?

lets say for every 10,000km

Any comments on this

I got this off the Interent

Sound/noise level will vary with the size of the pipe down the whole length of the system. A bigger pipe with a bigger muffler with a bigger tailpipe will make it louder. But if the system only has a larger dump pipe and a stock size pipe after that, it will stay the same and make little or no difference for power too.

Galebanks.com has a tech section with loads of info, even if he doesn't make a system for that truck, his knowledge is unparalleled.

If the standard piping other than the dump pipe remains the same will fuel economy really change?

I am still having trouble understanding with the exhaust gases exiting from the standard piping , though the pictures posted were helpful.

Just trying to work out whats true and trying to learn.....thanks

Edited by samuri
Any chance of showing how this dump pipe will benefit fuel economy, and reduce costs?

lets say for every 10,000km

Any comments on this

I got this off the Interent

Sound/noise level will vary with the size of the pipe down the whole length of the system. A bigger pipe with a bigger muffler with a bigger tailpipe will make it louder. But if the system only has a larger dump pipe and a stock size pipe after that, it will stay the same and make little or no difference for power too.

Galebanks.com has a tech section with loads of info, even if he doesn't make a system for that truck, his knowledge is unparalleled.

If the standard piping other than the dump pipe remains the same will fuel economy really change?

I am still having trouble understanding with the exhaust gases exiting from the standard piping , though the pictures posted were helpful.

Just trying to work out whats true and trying to learn.....thanks

If you are trying to work out how to reduce fuel consumption with a M35 Stagea you are looking in the wrong direction and the wrong car.

Replacing the stock dump pipes achieves 2 things

1) Removes a restriction by increasing the diameter of the pipe and removes narrow opening at the turbo.

2) Removes a catalitic convertor that is a huge restriction.

Benifits:

1) Improved power in low to mid range. (not dyno tested as too expensive to keep getting a dyno run for each change I have made)

Negatives:

1) Slightly louder at the dump pipe but not an issue.

2) A little more heat transfer to the floor of the car. (I have just rectified this by thermo wrapping the dump pipe)

Hope that helps.

Cheers

Andy

Any chance of showing how this dump pipe will benefit fuel economy, and reduce costs?

lets say for every 10,000km

Any comments on this

At least 10 people have a dump pipe of some description on their their cars, ALL of them have reported a performance gain. The extra power/torque allows you to use a smaller throttle opening in any given situation (i.e. hills, pulling away from lights) to achieve the same end result.

I got this off the Interent

Sound/noise level will vary with the size of the pipe down the whole length of the system. A bigger pipe with a bigger muffler with a bigger tailpipe will make it louder. But if the system only has a larger dump pipe and a stock size pipe after that, it will stay the same and make little or no difference for power too.

One word; Bollocks.

Galebanks.com has a tech section with loads of info, even if he doesn't make a system for that truck, his knowledge is unparalleled.

Maybe so, but he doesn't have FIRST HAND experience with THIS car. Look at the guys reporting positive results in THIS forum.

If the standard piping other than the dump pipe remains the same will fuel economy really change?

Yes; I could be wrong, but I think so far, I'm the only one to fit the dump pipe ONLY; with the standard exhaust.

My opinion; It makes a HUGE difference to the car, responsiveness, reduced throttle opening required, POWER, TORQUE, honestly it's like a different car. Fuel economy, a little, but it's not like you're suddenly going to be getting 6l per 100km. This car weighs around 1700kg (minimum) not a Prius by any means.

I am still having trouble understanding with the exhaust gases exiting from the standard piping , though the pictures posted were helpful.

Just trying to work out whats true and trying to learn.....thanks

The best thing you could do is; look at the forum, trust the guys who have done the mod, read their feedback, follow their lead. First hand experience form the guys on this forum is worth it's weight in gold.

Cheers, Dale

EDIT, bah! Andy beat me.

Can you see the pattern forming?

Edited by Daleo

The stagea exhaust seems pretty atypical - in most exhausts the dump would definitely not be a significant restriction. what samuri says stands true in the majority of cases however based on several pieces of anecdotal evidence and the pretty pictures of a big hole becoming a really little hole (ie, the stock dump and 1st cat on the last page) i'm more than happy to accept that a better flowing aftermarket dump is going to make a discernible difference.

Any chance of showing how this dump pipe will benefit fuel economy, and reduce costs?

lets say for every 10,000km

Any comments on this

I got this off the Interent

Sound/noise level will vary with the size of the pipe down the whole length of the system. A bigger pipe with a bigger muffler with a bigger tailpipe will make it louder. But if the system only has a larger dump pipe and a stock size pipe after that, it will stay the same and make little or no difference for power too.

Galebanks.com has a tech section with loads of info, even if he doesn't make a system for that truck, his knowledge is unparalleled.

If the standard piping other than the dump pipe remains the same will fuel economy really change?

I am still having trouble understanding with the exhaust gases exiting from the standard piping , though the pictures posted were helpful.

Just trying to work out whats true and trying to learn.....thanks

Andy and Dale are right on the money here Graham.

The best thing you could do is; look at the forum, trust the guys who have done the mod, read their feedback, follow their lead. First hand experience form the guys on this forum is worth it's weight in gold.

Couldn't agree more.

Edited by iamhe77

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...