Jump to content
SAU Community

Recommended Posts

Good pick up Duncan and Neil.

I also have been let down by faulty tyre pressure gauges in the past and I now have two - a digital unit and an analogue unit. I pump the tyres up with the digital one and check them with the analogue on - only then am I confident that the tyre pressure is correct.

Tyres are just too expensive to run them at the wrong pressure.

  • 4 weeks later...

This coming weekend see's us off to Tamworth for round 5 for the NSW Champs.

Alan (turboed Austin Healy) and I are fighting hard for the class win and he beat me at the last one and beat last year at Tamworth as well, so I have to pull my finger out.

Will be interesting to see how the car goes now with proper tyre pressures.

I am now running a GTR rear spoiler, so adjustability should help on one of the flatest climbs on our calendar.

We have unfortunately spent way too much money on non race car stuff recently, more on the tow car. Melinda was sick of buying ice all the time,so we bought an Engel 12/240 40 litre fridge and we now have a new navman with Hema 4wd tracks loaded. I'm getting worried about the wifey.

 

 

Cheers

Neil

 

 

 

 

 

 

  • Like 1
On 21/06/2016 at 7:33 PM, Neil said:

I've always wondered why I've had lack of rear traction,

Duncan decided to fit his TPMS onto my wheels for the last run at the last hillclimb and checked them with his hand held gauge just to make sure they were working properly. We checked it with another guys gauge just to make sure.

Turns out my tyre pressure guage was reading 7 pounds lower than fact. What a waste of those soft slicks, might have to re-visit them after I wear out the current Hankooks.

Cheers

Neil.

Well that's a shit go!

Just so you know, I find those BMW ones quite accurate, and when they give up, the gauge part can clear about 2metres of flight on a 42PSI tyre...

  • Like 1
18 hours ago, MBS206 said:

Tell Mel, in a few weeks I'll come up and we can go test out that Hema!

Good luck in Tamworth too!

We should invite Fatz as well, then I can say I pulled a cruiser and a 4 ring circus out of the mud. The hema maps are strange, 2 locations today, 1st one took us through private property with lots of goats, cows, sheep and dogs all cruising where ever they liked and the 2nd one stopped us at a locked gate after a billion river crossings. Think I'll have to invest in a snorkel next, Mel is getting out of control with all this 4wding shit.

 

Great to report though the patrol did her usual thing and cruised up here with out any problems. Now It's Cheryl's turn to do her stuff.

Cheers

Neil.

 

18 hours ago, MBS206 said:

Well that's a shit go!

Just so you know, I find those BMW ones quite accurate, and when they give up, the gauge part can clear about 2metres of flight on a 42PSI tyre...

I have another BMW one if you so desire.

17 hours ago, BOZ22N said:

Good luck buddy!

Thanks mate, I'm gonna need it.

It's a pity your build thread pics don't work anymore, I would have liked to show one of the guys son's your car this weekend.

 

Cheers

Neil.

 

5 hours ago, Neil said:

I have another BMW one if you so desire.

All good mate, going to grab some deflators for it. My poor legs and knees don't like being kneeled down the whole time.

 

And yep. HEAPS of off road maps hit locked gates or private property. Had the same issue before when following other maps, ha ha.

I need a snorkel too, been through a few water crossings I shouldn't have and risking an engine, ha ha.

Have fun at Tamworth, hope you beat the other guy... if not you can always lend him your tyre gauge ;)

Great day of racing today, I didn't win my class, but I had a ball.

Allan in the Sprite beat me by 6 tenths, so good luck to him. :D

http://racing.natsoft.com.au/637374993/object_361324.87Q/View?1

22nd outright is a pretty cool result in my book.

Things to attack in the future shall be wider rear rims and harder springs.

Pleasing to note that the GTR rear spoiler and correct tyre pressures help immensely, now maybe I might go back to a big front splitter again.

 

Cheers

Neil.

  • Like 2
12 minutes ago, fatz said:

I though to become the state hill climb champion you just had to turn up

 

two people in the same class this shit is nail biting 

 

Love sugar tits

Kiss it ya bitch, but the fact remains, I'm out there doing it and your sitting behind a keyboard. 

 

Cheers

Neil.

  • 2 months later...

It's been a while since I've up-dated this thread, since Tamworth we ventured up to Raymond terrace where Alan handed me my arse by a full second, but with Canberra being the next round and a quick open run I thought I would buy some new tyres. We had booked Leyburn Sprints up in QLD in between so I ordered a set of Hankook 255's instead of the 235's and they seemed to work better. I thought it would be a good idea to do some testing before the Canberra round so I booked a day at Marulan. Things were going great on a track that I knew, the wider tyres were working a treat, but Cheryl decided to start arguing. Turns out the Bosch 040 pump has been picking up a load of black shit from the bottom of the tank and was blocking the pick-up. Replaced it because I was worried it may have been damaged from starvation,chucked her on the dyno and all was good again. Seems I now have 255 kilowatts not 235, dyno's are so full of bullshit. We turn up to Canberra and she's fouled the plugs big time, Duncan and I changed them and she was purring like a kitten again. Had a great fight with Alan all day and happy to say I got the trophy. So with 1 round to go at Huntley I can't be beaten for the Championship. I'm thinking I'll revert back to the smaller tyres and save the bigger tyres for the weekend after which is the Australian Hillclimb championships in Victoria.

Work never stops though, I decided to lighten the front reo so with my trusty hole punch kit I saved almost a kilo,

 

20161013_213506.jpg

At Marulan I was out with a dirty Evo that was more than happy to cut corners and throws rocks at me. Look at the treatment my poor chinese oil cooler copped.

 

20161013_213604.jpg

 

So I decided to dump it and change to a serec cooler I've had been meaning to run for ages

 

20161013_213838.jpg

 

 

Cheers

Neil.

 

 

 

  • Like 2
15 minutes ago, fatz said:

 

Neil you should buy a evo they are fasterererrrrrrr 

Sad but true.

But they are oh so soul-less. Just press the right button for the track you are on and let it go

Please Gents, no talk of dirty evo's in my build thread.

Only a retarded fool would give up a Skyline and buy a such a ugly toilet of a car. Such a male should have all their genitals removed with a blunt knife so there's no chance of re-attachment. 

Cheers

Neil.

  • Like 4

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • All the best with it mate. Hopefully no dramas. I found quite a few issues when i pulled mine out eg fkt trans and engine mounts, throwout bearing, i had not been aware of, so 'any car maint' can be worthwhile it seems.
    • I think it's the alternator, there's some cracked shit going on with the rectifier. But so far, seems to be fine again? No sparks, no weird arcing when the leads went on. I ran this past a mate, he said he had similar issues before and his auto sparky replaced the alternator. All I know is, car works, car not on fire lol.
    • Brother-in-law's workshop. And I'll be doing. Family doesn't get priority over long running customer jobs. It wouldn't normally take so long to get to a task of mine, but there was a series of unfortunate events involving the dyno (blowing it up) that caused a serious backlog in the normal workload, that has toaken literally forever to get out from underneath. I can't do, or more to the point, choose not to do, jobs at home that require tools I don't have or would leave me without my daily if something goes wrong that thwarts me. Gearbox out on the floor with chassis stands is not palatable when I can use a hoist at the shop. But I've only had the box for a few weeks. It's the injectors and AFM that have been waiting on access to the dyno.
    • Thanks for mentioning it on the forums! Much appreciated Jen and I likely can't make it this weekend, but looking forward to see what you folks cook up in the future. Enjoy!
    • Welp, I have been driving it around (a bit) and messing with idle and return to idle characteristics. This is all well and good until I discovered my starter motor... is nearly dead. This is unfortunately after I booked my exhaust and tune in. This is the new section of my exhaust, after losing my mind with vbands and clamps. Yes I now have 4 mufflers. The two middle ones are 5in body 3in pipe round straight through mufflers or incorrectly named 'resonators' whatever you want to call. How does it sound? Muffled.   Car runs richer now in low load. Is it restriction? Or lack of exhaust leaks. I also figured out a way to make the Analog Readout match the serial WB Readout. All of this requires a car to you know.. *start* to tune the maths, which was not ideal when I needed it to get to the exhaust shop and back. It started when cold. 30 mins after the car got home, it was time to get stuck into it. Unfortunately this thing has no identifying marks on it at all. I contacted Mal Wood and asked if he could send me a replacement and he asked me to remove it because they've changed starters with their kits a few times over the years. I asked other companies with LH LS starter conversions and they all use different starters unique to their kits. I did find CAE performance supply Mal Wood - But they are out of stock for this starter for the next 3 weeks. The tune is booked for Friday 30th. Here's hoping the local starter motor repair place (which interestingly has a 5 star review from Trent @ Chequered) can get this rebuilt/sorted out so I can get it on and put the car on the dyno. Here's hoping!
×
×
  • Create New...