Jump to content
SAU Community

Recommended Posts

The poor front end really needed a clean-up after years of racing, so I pulled almost basically everything out, my god was it filthy. The only 2 things I had to leave on her were the upper control arms because they were in so tight, I didn’t want to damage the welded-on nut retainers, and you can’t get a rattle gun in there anyway so it would mean that’s one I’ll leave alone. They seem to be the great condition anyway, so I moved on. I tried to work out the best cleaner to remove all the muck, oil, grease and road junk, turns out window cleaner works the best using multiple brushes, including a toothbrush, unfortunately it takes small bits of the engine bay paint off, but I’ll touch that up. The following pics only really show some of what was in the engine bay and skirts after a brush down, there was tons more dirt and shit than in these pics than was actually there. I’ve started putting it all back in, loosely because I have a panel beater coming over to fix her right-hand front after clubbing the wall some years ago at Mount Cotton. I amazed after a month of scrubbing, how clean every comes up, the cross member is gloss black again.

20221102_155335[10377].jpg

20221102_155353[10375].jpg

20221102_155359[10373].jpg

20221102_155505[10371].jpg

20221102_155510[10369].jpg

20221122_150724[10386].jpg

20221205_185549[10419].jpg

20221205_185528[10420].jpg

20221205_185514[10421].jpg

20221205_185505[10422].jpg

20221205_185501[10423].jpg

20221205_185452[10424].jpg

20221122_150754[10417].jpg

20221122_150735[10416].jpg

  • Like 3
11 hours ago, Duncan said:

R series skyline - check

Engine bay cleaned with a toothbrush - check

30 years old - check

 

yep, it's ready to be shipped off to USA for about $800k

So still not enough for a house deposit in Sydney... :(

 

Keep going Neil! Giving me motivation to do the little tidy up jobs that I scrubbed off my build list after getting annoyed with them.

 

while the panel beater is around, have you thought about getting him to smooth over and remove any of the bolt holes and random holes that you don't need any more to tidy the bay up looks wise, and remove areas for dirt and crap to gather?

18 hours ago, Neil said:

Seriously did you actually think Cheryl would never get any love again, she is the only real reason I bought a Hoist, it's Her's.

Might have to drag you 2 up here when both cars are up and running properly.

Zoe is very pissed off with you, she pointed out that you own a dirty filthy Toyota. Zoe's a lovely lady with pure class.

Shhh... He'll criticise you for that Honda you're letting sleep with Zoe and Cheryl next...

18 hours ago, Duncan said:

R series skyline - check

Engine bay cleaned with a toothbrush - check

30 years old - check

 

yep, it's ready to be shipped off to USA for about $800k

No Yank is ever getting my girl. Most of them wouldn't know how to change her spark plugs, they would ask facebook.

6 hours ago, MBS206 said:

So still not enough for a house deposit in Sydney... :(

 

Keep going Neil! Giving me motivation to do the little tidy up jobs that I scrubbed off my build list after getting annoyed with them.

 

while the panel beater is around, have you thought about getting him to smooth over and remove any of the bolt holes and random holes that you don't need any more to tidy the bay up looks wise, and remove areas for dirt and crap to gather?

Sydney, I feel sorry for anybody that still lives there. 

Nah buddy, she's a race car, not a show pony, so Mr panel beater will be just fixing the o/s/f skirt area. I really just want to clean her up, so she looks clean and respectable. Her days of State and National racing are over, Cheryl is now my fun local race girl and a driver trainer.

7 hours ago, MBS206 said:

Shhh... He'll criticise you for that Honda you're letting sleep with Zoe and Cheryl next...

No way tiger, he was the one that introduced me the best mower brand ever, I have her and a Honda whipper snipper, they are both excellent, both start 1st pull, pity his is now a dirty oil leaking, gets bogged Pommy pile of shit tractor, it's that shit he makes Kel drive it.

On 17/12/2022 at 6:32 PM, MBS206 said:

Shhh... He'll criticise you for that Honda you're letting sleep with Zoe and Cheryl next...

It is good to hear that the "Honda" is just a lawn mower.

I was starting to worry that you had gone soft in your old age and purchased a "Try hard Honda" as a daily street car.

36 minutes ago, Victory said:

It is good to hear that the "Honda" is just a lawn mower.

I was starting to worry that you had gone soft in your old age and purchased a "Try hard Honda" as a daily street car.

All good Charles, whilst I do actually like Hondas, there will never be one on our Rego list, not like someone that owns a Leyland and a Toyota, that bloke has issues.

So on re-assembly, (as she needs to get off the hoist and rolling so I can service the wife’s Pulsar) I thought it prudent to replace parts that were either stuffed or needed an upgrade. So 1st off was new upper adjustable outer control arm bushes, new lower ball joints, new sway bar outer links and inner bushes. Everything else feels in great condition.  I can’t believe how good the wheel bearings and swivel bearings are, not touching them. The clutch slave cylinder was showing its age so a new one was purchased from Just Jap.

I have also been playing this crazy game of soaking stuff in vinegar, works a treat, but you can go too far, my god it cleans crap off, but if you leave bolts ect for too long it will take the excellent coating off the factory bolts.

I bought 7 x 2nd hand stainless steel baymarie trays off facebook marketplace up here for 10 bucks each, they make great parts trays and can withstand the vinegar/oils, basically anything. Awesome purchase.

Having the mini lathe has come in so handy, My Cusco bmc stopper has 12mm mounting holes, well 11.6 to be precise but the skirt has 6mm holes, so I made up 2 stepped spacers out of 6061 aluminum to sort that out. So much fun using the lathe.

 

20221220_235220[10466].jpg

20221207_121030[10438].jpg

20221210_155730[10447].jpg

20221210_155757[10446].jpg

20221220_234146[10464].jpg

  • Like 2
  • 2 weeks later...

I've spent the last 2 weeks just going through all the parts I have and sorting out what's good, what's spares that I'm going to keep and want's up for sale and what's going back on Cheryl. Thought I would find and clean the turbosmart bov and it was filthy, so I pulled it apart and cleaned it up. 5 stars to them, such a well-made unit, the piston and bore are beautifully made and came up a treat. Unfortunately, the same can't be said for its intercooler pipe, check out the damage I did to it, lucky I have spare. So out with the hole saw and cut the adaptor off, into the lathe and I machined all the welding off, so much fun. This little lathe comes in so handy, I also made an oversize 11mm exhaust manifold stud for my neighbour's rb20 drift car after all his mates said the head would have to come off, even cutting my own thread, now that's a 1st for me. The replacement intercooler pipe is longer and I'm thinking how the hell am I going to run a bead around it after I cut it. Onto to ebay and there's tons of them but 400 buck plus, and that's is not happening, then I find this one for 160 bucks and thought why not try it, they state aluminum pipe 16mm to 102mm at 3mm. I tried it on a 30mm pipe, and it actually works.

Enough for now, enjoy 2023 everybody.

20221226_234754[10473].jpg

20221226_234800[10474].jpg

20221223_175035[10472].jpg

20221226_234835[10475].jpg

s-l1600.jpg

20230103_213328[10477].jpg

  • Like 1
16 hours ago, Duncan said:

Nice, there's never a bad time to buy new tools. Have you got someone local to TIG the BOV back onto the new pipe?

Actually, I do and it's my next door neighbour. He makes roll cages/trailers for his mates and people that he barters with to do stuff he can't. He's an awesome welder, mig, tig, stick and plasma. I often go over to watch and learn, I'll be doing my own soon. My back neighbor restores older cars, has a cool homemade spray booth made out of a big shipping container and Ian 3 doors down can panel beat like a demon, so it's like moving to car building heaven. How the hell did I stumble across these blokes I'll never know. I hold up my end up with technical advice, cool tools, labour and practical solutions. The rb20 drift car would not be running as sweet as it does without me. It's all a win win for all 4 of us. Life is great.

  • Like 3

Hi Neil. I have been a silent reader on SAU for a number of years. My particular interest is Skyline GTST suspension set ups for Track. I have just sent u an email so I can grab some of your insights. I love this thread in regards your work and views.

Thank you Bruce 

On 1/11/2023 at 2:06 PM, McLoft said:

Hi Neil. I have been a silent reader on SAU for a number of years. My particular interest is Skyline GTST suspension set ups for Track. I have just sent u an email so I can grab some of your insights. I love this thread in regards your work and views.

Thank you Bruce 

My Interest is understanding firstly the optimum/ acceptable position of the rear lower control arm. Can it be parallel to the ground to achieve acceptable roll center? Then having established lower control arm position, what would be optimum camber and toe for suspension on a track car. The rear end is not on a skyline so i cant do wheel to arch measurement. Thanks

 

Edited by McLoft
26 minutes ago, McLoft said:

My Interest is understanding firstly the optimum/ acceptable position of the rear lower control arm. Can it be parallel to the ground to achieve acceptable roll center? Then having established lower control arm position, what would be optimum camber and toe for suspension on a track car. The rear end is not on a skyline so i cant do wheel to arch measurement. Thanks

 

This is how my 180sx is. I have also set up nissan IRS in nissan minitruck style builds to have full travel of the suspension with low static heights of around 70-80mm

180sx is 1200kg with driver
255/40/17 semi slick

You want it worst case parallel but I have found it slightly angled down towards outside is better.
I run rear camber 2.3 degrees, Toe in 0.9-1.2mm eash side
Ride height of around 105-112mm.

Apologies for hijacking 
 

Edited by robbo_rb180

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...