Jump to content
SAU Community

Recommended Posts

here is a video of the fastest auto-x run of the day, you can hear our coilpack working, then not, then working then not. soo frustrating, I can only imagine how much faster we would have gone without the miss

the ETS-pro is great, you can see at the launch that all 4 wheels are spinning, and then at the end you can see a perfectly controlled 4 wheel drift

Are there any other EFR 9180 results yet? (Besides Sierra Sierra)

And can anyone confirm that the Indy cars will be using these turbochargers and if they will be any different from the production version available to the public?

Yes - I can confirm all 2012+ Indycars use a 100% off-the-shelf EFR rotating assembly, the same exact turbine and compressor wheels / shaft / bearings that every aftermarket customer will receive. The wheels are literally 9180 and 6758s. The only difference is indycars weld the twinscroll housing to their headers, so there is a different inlet (i can post a pic if you need to see). for the twin turbo chevrolet engines, they get an external WG t25 housing for the 6758s (this is so teams can not cheat and raise the boost). same center sections however

2 races completed, no turbo failures (edit for the haters!)

Edited by Full-Race Geoff

Anyone know if Penske are running the Single turbo or the Twins?

penske is winning because of their suspension/chassis perfection imo, the turbos were within 1/2mph of one another. here is a photo, you can see the penske dampers and the twin EFR 6758, stock center section complete with internal wastegate mounting holes in these 2 photos:

575x459.jpg

575x459.jpg

575x459.jpg

575x459.jpg

chevy twin turbo:

575x459.jpg

575x459.jpg

575x459.jpg

Lotus twin turbo here:

575x459.jpg

575x459.jpg

575x459.jpg

575x459.jpg

Honda is running the single twinscroll turbo:

575x459.jpg

575x459.jpg

575x459.jpg

575x459.jpg

575x459.jpg

note: honda is the only team using "header bags" to contain the heat. chevy and lotus just use raw or coated tubular fabricated headers.

Is there any indication when the lead time will become weeks instead of months?

I do not know the answer to that question yet, BW are hesitant to give us anything until tracking numbers are ready. We will certainly let everyone know the updates we receive.

Edited by Full-Race Geoff

Geoff, are the Indy cars running antilag with these turbochargers? Also, do they have a use program i.e. after one race, throw in bin put a new one on?

A twin EFR 6258 would be cool with external wastegates... just not much room!!!!!

Geoff, are the Indy cars running antilag with these turbochargers? Also, do they have a use program i.e. after one race, throw in bin put a new one on? A twin EFR 6258 would be cool with external wastegates... just not much room!!!!!

mike, my understanding is that indycars are using their own unique antilag system, it is not the rallycar wrc style air injector valve style

everything for these teams is regimented and methodical, typically the engine and turbo are serviced together as a unit and my understanding is that they only change the turbo if they need to change the engine. anybody watching the races can clearly see there were no turbo failures or teams frantically rebuilding their motors during any of these races

excellent wastegate placement on those cars!

So Geoff, after your first outing, any regrets on your choice of turbo size and rear turbine size? Any plans to test different turbo/turbine combos on this car?

Edited by black bnr32

I am daily driving the EFR 8374 internal-wg on my 2.0L twinscroll evo street car for 2 months now so it was a lot of fun to try the external gate on my 2.6L RB26 it is another animal completely. We flogged it for 4 days straight and i drove both cars on the local streets and highway at different rpm points and loads. I know this RB26 engine/head/cam combination very well (had it for years now) so i can confidently say that no turbo has worked nearly as well as this unit. Of course i really got my chassis sorted which helps confidence at speed, but biased or not this is the best setup ive ever felt in the car. My driver for the autocross was a long time friend from engineering school who competively races 997tt porsche and mustang v8 autocross prepped cars, he calls my car "the easy button" just punch it and instantly the torque is up, very driveable and forgiving

One particular comment is this turbo's powerband works well with the 5 speed r32/33 transmission and 4.111 fd. I no longer feel obligated to swap the R34 6 speed box in (I wanted to save the 6 speed for my dedicated race car anyway). On all previous turbo setups i felt the 6 speed box was necessary. Torque comes on so much earlier and stronger with the EFR, huge improvement.

My comments/thoughts are:

-i prefer the internal wastegate EFR 8374 .92 a/r. to me this is the cleanest and lightest weight way to run this turbo. On my evo i absolutely love it - not once have i wanted external wastegates. the amount of work required to properly recirculate (2) external wastegates is no small feat. I invested HOURS into this, and will never offer recirc'd external wg's for customers... it literally takes that much time. If its a serious dedicated race car however, the external gate is the way to go.

-since im already on the external wg twinscroll T4 config, im extremely interested to know what the 9180 does to the powerband? that will probably be the next turbo i try, if its as "magical" as the indy guys say i might keep it there and not go to internal wg 8374

-my next major change is to use the proEFI ecu and get wider rear fenders. On the 275 street tires it is easy to do 4 wheel burnouts from the EFR turbo and ETS-Pro center diff controller. Using the proEFI traction control combined with the efr turbo and ets-pro i believe we can have one of the fastest street tire cars in the USA, my goal is to run the 315/30/18 and then pro-efi traction control to put it all down. i cant imagine any rwd cars being competitive there, we will see! maybe if we can get our act together and make it to WTAC 2013

Yes give that 9180 a go on some pump fuel please Geoff. The only equivalent would be a 67mm S400SX correct? But from what you have outlined that is more of a class drag racing turbocharger.

Finally booked my car in for a tune next week.

Should have results for the 6258/SR20 combo next Tuesday. :)

Ohhh I'm excitement!

If I don't BIN my SR before then you may sell me! Here's hoping man.

P.S. I take it that the wiring stuff we discussed worked out?

Didn't get around to wiring it in unfortunately. :(

And being one of those things that could quite easily turn into a massive clusterf**k, I've decided to put it on the back burner for now. Got a track day on the 16th, which I am not under any circumstances going to miss...

As it is, the car still hasn't been started in 12+ months...

Tune will be with the low pressure actuator for about 14psi, then after track day, LQ9's will be going in, 18 psi actuator fitted, and tuned for 20ish psi.

i've also been trying to find info and results of the EFR turbos and stubbed on this last year but haven't kept up to date so 46 pages later....

i've emailed full race regarding set up for my SR so supper keen to see how you go dave. reckon the experance you have will judge if i go ahead.. or go just for a GTX28 good luck

Tuned by Willall Racing today. So after a long year, I can finally report some results.

Mainline dyno.

BC 262 cams. (I think they may be larger, it sounds real angry at idle).

140-145 compression across the board.

E85 with SARD 850cc injectors.

Blitz SBC-S boost controller.

Custom made thick walled S/S manifold.

And finally, there's an air leak somewhere. Inlet manifold I think, gets up to 17psi nice and quick, drops to 15psi, and holds. Probably a handful of KW to be liberated there.

Anyway, results,

261 @ 17psi (bleeding off to 15). Full boost somewhere around the 3,400rpm mark. It always wants to get onto boost, cruising at 90km/h in 5th gear and you just have to breath on the pedal and it comes onto boost. Comes on nice and strong, but even with my dodgy 11 o'clock at night eye alignment, it's very controllable. And yet, it'll quite happily chalk 255's in 3rd.

And it sounds f**king brilliant.

Gonna get it smoke tested if I can find someone that does it, seal up that leak, and put it back on the dyno.

I've asked the tuner (Donnon) to email the dyno sheet, so hopefully I'll be able to get that up in the coming days. :)

Tuned by Willall Racing today. So after a long year, I can finally report some results.

Mainline dyno.

BC 262 cams. (I think they may be larger, it sounds real angry at idle).

140-145 compression across the board.

E85 with SARD 850cc injectors.

Blitz SBC-S boost controller.

Custom made thick walled S/S manifold.

And finally, there's an air leak somewhere. Inlet manifold I think, gets up to 17psi nice and quick, drops to 15psi, and holds. Probably a handful of KW to be liberated there.

Anyway, results,

261 @ 17psi (bleeding off to 15). Full boost somewhere around the 3,400rpm mark. It always wants to get onto boost, cruising at 90km/h in 5th gear and you just have to breath on the pedal and it comes onto boost. Comes on nice and strong, but even with my dodgy 11 o'clock at night eye alignment, it's very controllable. And yet, it'll quite happily chalk 255's in 3rd.

And it sounds f**king brilliant.

Gonna get it smoke tested if I can find someone that does it, seal up that leak, and put it back on the dyno.

I've asked the tuner (Donnon) to email the dyno sheet, so hopefully I'll be able to get that up in the coming days. :)

Congratulations on the result, but the No.s seems low for what its got.

I have a Garrett GT2871 56T in .64 rear in my 180SX SR20det with Tomei Pon cams and that made 260rwkws on 18psi with pump 98 fuel. 261rwkws on E85 is propabably just pass 230rwkws on pump. Whats that turbo equivalent to in Garrett range?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
    • hahah when youtube subscribers are faster than my updates here. Yes some vid from the day is up, here:  Note that as with all track day videos it is boring watching after the bloopers at the start.  The off was a genuine surprise to me, I've literally done a thousand laps around the place and I've never had instability there; basically it rolled into oversteer, slipped, gripped and spat me out. On the way off I mowed down one of the instructor's cones and it sat there all day looking at me with accusing cone eyes as I drove past. 1:13:20 was my fastest lap, and it was in the second session, 3rd lap.  It (or me!) got slower throughout the day as it got hotter.      
×
×
  • Create New...