Jump to content
SAU Community

Recommended Posts

I cannot see why people are still using twin setups. If garret cannot develop a rear housing for their gtx twin range, means to me that the problem is with the rear housing. It nearly cost me an engine in 6min of track time.

The setup that Piggaz is referring to is mine.

All I can say about the setup is that I should of done it earlier and not bothered with twin -5's.

IT'S FCKN AWESOME in all areas. Just do it and you won't look back.

  • Like 1

The BW EFR turbos have a speed sensor that you can install on them to measure the rpm of the turbo. They have upper limits of course. There's a pretty fixed relationship between boost, speed and airflow (from memory, don't scold me if i'm wrong!) so it helps with safety and getting a good handle on exactly whats going on in your setup

The exact same one that sits on the back end of -5's

Ok, but that was made in the 90's. Do you know why they didn't make a newer design rear housing?

With my setup, the turbo is making noise at 2000 and at 3000 it wants to rip your face off.

The BW EFR turbos have a speed sensor that you can install on them to measure the rpm of the turbo. They have upper limits of course. There's a pretty fixed relationship between boost, speed and airflow (from memory, don't scold me if i'm wrong!) so it helps with safety and getting a good handle on exactly whats going on in your setup

Boost and flow doesn't have a fixed relationship. That's why I'm maxing out at 25psi on a 3 litre. A 4cly 2ltr would prob take 30psi before maxing out.

Keeping under the speed limit stops the turbine falling off.

The BW EFR turbos have a speed sensor that you can install on them to measure the rpm of the turbo. They have upper limits of course. There's a pretty fixed relationship between boost, speed and airflow (from memory, don't scold me if i'm wrong!) so it helps with safety and getting a good handle on exactly whats going on in your setup

ah yes my mechanic did install the speed sensor for the RPM on the compressor wheel. also recommended I get one.

he said due to the lightweight material used on BW, its a good idea to keep an eye on how fast it is spinning so you don't break it!

just post the gtx turbos up here and I'll test them for you

So you can find out 1st hand how hard they will fail and prove me right about all the shit i been harping on about in the GTX thread? Of how GTX compressors wont work with factory location housings?

Garrett put these compressor wheels in their own housings for a reason mate ;)

Honestly Pete you will be making the right move taking the EFR route.

So what if the GTX wheels turn out to be a "tad better" (which i highly doubt) will the machining costs etc be worth it? The EFR will still punch holes in them from 800rpm - 8000rpm in every single way and the money spent on machining etc goes to a manifold for the single an intake pipe, a cooler pipe change and a dump pipe.

The offset in the price wouldn't be that much different (if going IWG .92) BUT i guarantee the result and the way the car drive will be 100% better!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • That is surely the biggest gathering of Stageas in North America, ever!
    • Remember kids - if you can't afford to buy 2 GTRs......
    • I know people cry at the price of the Getrag 12-14k for a conversion now, but it really is a nice mid point. Not going to get change from 10k on a gearset installed.  $30k++ for sequential.   I know you run the risk of a damaged used one and parts are hard to get but as a street car gearbox its really hard to beat. If you enjoy a more traditional manual, its the choice no question.     
    • Time to decide what’s more import, your power level or your budget because you’re going to struggle to keep both 
    • Our Southern Highlands Cruise is proudly registered with “R U OK?” Day.  Sometimes the best way to check in on your mates is by getting out for a drive together. Sharing a common passion like cars creates the perfect space to chat, connect, and support each other.  A simple “R U OK?” can make all the difference. Let's enjoy the drive, the company, and look out for one another. PLEASE WEAR YELLOW FOR “R U OK?” DAY Sunday 14th September 2025 9:30AM Meeting Crossroads Homemaker Centre 10:00AM Cruise Departure Via Old Hume Hwy 11:45AM Arrival at Mittagong RSL Club Meet Location: Crossroads Homemaker Centre Final Destination: Mittagong RSL Club *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...