Jump to content
SAU Community

Recommended Posts

Tring to buy a R32 GTR RB26 front cut, only probably is tring to find somewhere to store it for a month or 2 without the wife finding out!!!

Any idea's

If my car doesn't sell soon i'll sell ya the 26 from mine with the loom to go straight into your stag.

Tring to buy a R32 GTR RB26 front cut, only probably is tring to find somewhere to store it for a month or 2 without the wife finding out!!!

Any idea's

Also bought some fancy brake fluid

Send wife? PO Box 2161 Boulder WA :) Or has this already been suggested? Sorry, haven't read whole thread.

OK.....I'll bite.

Cooling

HDI FMIC

Phenolic runner spacer

Nismo low temp thermostat

Custom(fisher) 3" intake

V35 manual radiator

Twin Trans coolers

TB spacer(lol)

Powerduct( :D )

catch can(s)

Turbo

High flow original to GT30/71

HDI EBC

Handling

Bilstein shocks

Eibach springs

324mm DBA rotor

R32GTR callipers with brackets

Hawk pads cut to size

Body

19" Lenso rims

R33 GTR N1 scoops

fully sic Nismo strips(custom fading ;) )

eyelids

Exhaust

Dump pipe....some japanese one

Complete Exhaust from Charlstone

ECU

Haltech platinum interceptor.....soon to go for a replacement reflashed ECU

Interior

Twin headrest DVD players

DTV

English conversion

On the horizon

Sway bars

Custom Airbox Suction pipe setup

Brembo's

Paddleshift's

Gearbox rebuild with stage 2 shift, 3,500 stall(depends on reflash outcome) and MVB

Bonnet pin's so I can lock the bonnet closed and give the key to my wife to STOP ME!!!!!!!!!

post-37023-1272098351_thumb.jpg

Edited by Jetwreck

I put the new cover on the motor, just got it back from the powder coaters.

stagea_cover.jpg

unfortuntely at the same time I found the old cam breather hose had a split so it has a temporary blue replacement.

I put the new cover on the motor, just got it back from the powder coaters.

unfortuntely at the same time I found the old cam breather hose had a split so it has a temporary blue replacement.

That looks awesome

That looks awesome

I'm guessing you don't mean the crappy blue breather!

Great work again from Craved Coatings on the cover... I picked up the cover on SAU, it was hand sprayed from a can. Craved sand blasted then powder coated in in crinkle finish black - looks mint :P

I was gonna ask where you got that coilpack cover from, Duncan - good find!

And yeah, Chris @ Craved Coatings is doing some awesome work, and he's definitely putting the hard yards in! I think he sleeps (much) less than I do!

I finally got rid of the stock exhaust, to replace it with a 3" X-Force stainless steel system, with a new dump pipe and 3" high flow cat con.

The guys at C-Red even gave me a silencer with it if the neighbors complain ^_^. Idont know why i didnt do it sooner! ^_^

I put the new cover on the motor, just got it back from the powder coaters.

stagea_cover.jpg

unfortuntely at the same time I found the old cam breather hose had a split so it has a temporary blue replacement.

That black bit on the cam cover is dear as poison. Just got one from Nissan. Nearly $40.

Luv that cover.

Edited by 66yostagea

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...