Jump to content
SAU Community

Recommended Posts

Congratulations to...

Aussie_Delivered_R32_GTR for its selection as the R32 GTR ADM representative at the GTR FESTIVAL in May.

Thanks Terry,

I'm really looking forward to this event.

Ironically the car hasn't been out since the 25th Anniversary in August 2014!

Fresh petrol won't hurt.

Bob.

That's great information - Thank You. I was a little suspicions as I also identified that the NSW registration history did not match their advertised story of the vehicle history. They may have an explanation for this though. But I am now better informed of the facts.

How did you know the exact month and colour? Is there a VIN code table that has a break down of the VIN layout and relevant codes so that they can be fully interpreted? I have tried to search to find it and haven't had much luck as there are too many references to VIN. :)

Thanks again

You need to find out more about how the car was imported; because nissan Oz was selling GTRs in 91/92 you can't import them yourself. About the only valid way for that car to be registered is if it was a Personal Import. Check the VIN with DOTARS to find out how it was complied.

I imported a 91 but it is only for race/rally use and can't be fully registered

Under the new rules you can't import them, but there are plenty of imports built around that time that are completely legal

link to proof? the rules have always been that low volume import is not possible when the manufacturer imports them. they can only come in:

Full homologation. Only nissan oz ever had this and only for 91/92 models.

1989 rule - was 15 year old until it was changed to stop all the post 1989 jap goodies coming in. Will become a 30 year old rule in 2019.

Personal import - if you can prove you owned it for 2 years (used to be 1) overseas

SEVS/RAWS etc if the manufacturer didn't import it at that time. So 89, 90, 93, 94 models are OK. 4 cars came in before 91 through scuderia veloce, the rest came in post 93.

Race/Rally - can't be registered except restricted/rally rego

Parts - has to be cut in half at a minimum.

Thanks Terry,

I'm really looking forward to this event.

Ironically the car hasn't been out since the 25th Anniversary in August 2014!

Fresh petrol won't hurt.

Bob.

Haha... And I think it'll be good to have "SAU" stickers on don't you (for MotiveDVD)?

link to proof? the rules have always been that low volume import is not possible when the manufacturer imports them. they can only come in:

Full homologation. Only nissan oz ever had this and only for 91/92 models.

1989 rule - was 15 year old until it was changed to stop all the post 1989 jap goodies coming in. Will become a 30 year old rule in 2019.

Personal import - if you can prove you owned it for 2 years (used to be 1) overseas

SEVS/RAWS etc if the manufacturer didn't import it at that time. So 89, 90, 93, 94 models are OK. 4 cars came in before 91 through scuderia veloce, the rest came in post 93.

Race/Rally - can't be registered except restricted/rally rego

Parts - has to be cut in half at a minimum.

we are talking about information that is now over 10 years old, but under the old system (green metal compliance plates) the rule stated the r32 skyline was eligible, which meant all variants and year models were eligible, just like the 300zx all turbo models were eligible

Under the new system that is not the case, you can only bring in year models that Australia did not sell new

Not exactly...........

The restricted R32's are only if manufactured between July 1 1991 and June 30 1992.

Consequently you could/can import them outside of these dates.

Cheers......... Bob.

post-78207-0-53449600-1454840897_thumb.jpg

Not exactly...........

The restricted R32's are only if manufactured between July 1 1991 and June 30 1992.

Consequently you could/can import them outside of these dates.

Cheers......... Bob.

under the new rule that is correct, under the old rule it was open slather
  • 2 weeks later...

I finally found someone willing to lend me an ADM rear number plate infill panel.

Im already looking at getting some reproduced.

Would anyone be interested?

  • Like 2

yuppp

Yes please

As soon as I firm up the prices and arrangements, ill let you guys know what is going on :)

The originals are made out of a thick rubbery kind of material, but the reproductions will be made from fiberglass, however carbon may be an option too.

  • Like 1

I just put up an "EOI" in the group buy section for these number plate panel infill copies:

http://www.sau.com.au/forums/topic/463043-eoi-adm-r32-gtr-rear-number-plate-infill-panel-copies/

  • Like 1
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
    • I started removing the tank a while back with the intent to give it a proper clean. Got to a bolt that I couldn't undo completely due to a diff being in the way, so just said f**k it and siphoned the gluggy old fuel out and called it a day. Looking it the tank it looks less corroded than the one in the pics for that billet hanger from Frenchy's anyway. Isn't it the fuel filters job to worry about this stuff? I scraped off most the crusty shit of the hanger but will give it another go before reinstall coz maybe the fuel and return pipes are also full of gunk  
    • Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
×
×
  • Create New...