Jump to content
SAU Community

Recommended Posts

or maybe you just refuse to concede he may have a legitimate point?, Troy.

I was rooting for the guy, preying he was going to get Vettel. The traffic for him was no different to what it was for Vettel, there was actually one moment with a car where Vettel got badly baulked and Hamo was right on him....he is having a sook because his nature is to be a whiney bitch. In the heat of battle it appears to surface when he gets a sniff....all this talk that he is the only one able to take it to Vettel....i like myguys to have a little humility. He slags off the team sayign the car is no match for RBR, yet he has won a GP and has better race pace at the last round...yet still sooks the car isnt quick, the other competitors are against him because he isnt German or the sponsors of teams.

GIVE IT A BREAK HOMO! I was just about converted...but now I am going to have to go back for rooting for Button to t-bone you :)

it's not like He was racing them for position stooge.

the back-markers having their arses lapped are supposed to get out of the way sharpish when flagged

The first driver on the scene loses a few tenths when they come up on backmarkers too so it usually evens out over a few laps but you are spot on, they need to move the hell out of the way.

Fisichella was pretty ordinary when it came to being lapped.

<snip>

Fisichella was pretty ordinary

<snip>

He was the hackiest hack that ever hacked

Im so happy he moved to the fuzz. Its nice of them both to contain as much hack as they can in the one spot for me to dislike

but anywayzzz, Saturday's retarded ignition battle looks like it should be the best one yet!

Edited by ctjet

Why the phark does anyone expect an F1 driver to be humble? I mean really. How is that in any way compatible with having the kind of self belief to know that of the billions of people on the planet they are, in fact, the fastest of all of them. Humble be fkd. It doesnt work that way.

Oh and for all you whinging about Hamo whinging you should have been around when Nigel Mansell was driving. If they gave out trophies for bitching he would have a shed full.

agreed troy. homotin is a whiney little girl. even worse he's teachers pet. he loves latching on to the stewards arses and sucking hard has he can...

"I just hope that the stewards are wary of it, and I'm sure they'll do a great job of it."

oh pah-lease. like he's pleading whiney radio calls on his team radio "chaaaaarlie, can you do something please" such a whinger.

I don't remember him ever being anything OTHER than a cockhead. he can steer ok but his idea of his talent doesn't really match the reality. he has walked into a car that since his very first steer of it has been in the top 3 cars on the grid in every year he's raced it. he should have had 3 WDC or more by now.

agreed troy. homotin is a whiney little girl. even worse he's teachers pet. he loves latching on to the stewards arses and sucking hard has he can...

"I just hope that the stewards are wary of it, and I'm sure they'll do a great job of it."

oh pah-lease. like he's pleading whiney radio calls on his team radio "chaaaaarlie, can you do something please" such a whinger.

I don't remember him ever being anything OTHER than a cockhead. he can steer ok but his idea of his talent doesn't really match the reality. he has walked into a car that since his very first steer of it has been in the top 3 cars on the grid in every year he's raced it. he should have had 3 WDC or more by now.

fkn fanboy

Friday is apparently a Public holiday during the GP in Monaco and all the shops are open to go and see how farken expensive shit is there. Thats the reason I heard for the Thursday practice.

its the annual wheel and deal day

but what a day!!

p1000413f.jpg

p1000429p.jpg

p1000430u.jpg

p1000435b.jpg

p1000501u.jpg

p1000473t.jpg

Definately going back, the place is unbelieveable

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...