Jump to content
SAU Community

Recommended Posts

1 bar? :sick: Pretty poor when road cars can safely run higher boost :rant:. Not that we'll ever see 5-bar 1300 bhp engines again, more's the pity

don't know why so many people get hung up on boost. champ cars made over 800hp with less than 3psi. just need some revs. 1.6L V6 pulling big revs on 1 bar boost could make enormous amounts of power with current electronic systems. they'll certainly be running restrictors to cap power.

Boost is only a measure of restriction...

And 500KW at 5,000RPM and 1000KW at 10,000 is the same amount of go fasts... ... ... :P

Torque people... It's all about torque... :P

Ok, I will take the second engine and you take the first, and we shall race....

Torque people... It's all about torque...

Garbage. This is the most persistent misconception in the history of performance vehicles.

Power and gearing is what determines acceleration and top speed, NOT the torque figure. You can make up for a lack of torque with shorter overall gearing, but you can never make up for a lack of power the same way.

If torque mattered more than power for foot-down stonk, you'd look at torque-to-weight ratios to compare performance potential, but it's power-to-weight that matters.

It's funny then how my 260kw 1800kg R35 GTR was able to beat my 380kw 1600kgs R34 GT-R in a straight line drag race.

So power-weight isn't everything.

Anyhoo - HRT has been sold to the Japs. Kings of the turbo 6's. Let's see what happens to them now.

Garbage. This is the most persistent misconception in the history of performance vehicles.

Power and gearing is what determines acceleration and top speed, NOT the torque figure. You can make up for a lack of torque with shorter overall gearing, but you can never make up for a lack of power the same way.

If torque mattered more than power for foot-down stonk, you'd look at torque-to-weight ratios to compare performance potential, but it's power-to-weight that matters.

power and torque, forever linked.

BUT Cmon Hoss, dem 2.6 litres just dun hav enuf of the tork to be fast not like me 454 V8.

It's funny then how my 260kw 1800kg R35 GTR was able to beat my 380kw 1600kgs R34 GT-R in a straight line drag race.

So power-weight isn't everything.

Anyhoo - HRT has been sold to the Japs. Kings of the turbo 6's. Let's see what happens to them now.

nissan??

rb16??

You never know.

Remember what RBR was before they were Redbull... and how successful they were.

Well any similarity between anything called HRT and a proper race team is entirely coincidental.

For that matter any similarity between a race team owned by an investment bank and a successful race team is entirely coincidental. Look at how "Renault" are going backwards for instance.

Renault pioneered the turbo charged formula one motor.

Nissan on the other hand have never even built an F1 motor of any sort.

So what would Nissan possibly be able to help them with?

this is true. one can only dream.. i was just happy to see infinity on the rb6 this year..

So ... does anyone rate Ricciardo a long term chance?

In the short term at least I think he's going to give Liuzzi a real touch up. And Buemi and Alguersuari will be thumb-wrestling for the remaining seat at STR next year

Personally I'd love to see him make the next step (ie out of a shitter and into a top 10 car). But unfortunately it is probably as big a step as getting a start in the first place. Far too much luck involved...always has been.

BTW Liuzzi is no hack, and I'm not convinced Karthekeyan was either. Put anyone in a shitter and they will have a hard time too

yep, and Luizzi has heaps of F1 experience. You can bet he'll be motivated to beat the hotshot rookie too. Ricciardo is good, but don't expect too much for the first few races is my tip. I'd say racing the HRT will be a very different kettle of fish to testing the Red Bull.

Ricciardo has to be looking good as a long term prospect. He's still slated for Torro Rosso next year, which is the same path RBR put Vettel through. He's got the opportunity and certainly seems to have the speed & ability.

Edited by hrd-hr30

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...