Jump to content
SAU Community

Recommended Posts

Argh the lovely jap exhaust step down

Yep, so if it causes me a problem I'll be looking into getting whatever the quietest exhaust is I can without restricting flow :)

If you end up dropping in to Perth, I'll show you what a real free-flowing exhaust sounds like ;) Lol.

You can definitely get true 3" exhausts that are within legal limits. Best bet is custom though, don't go off the shelf stuff. With custom you can tell them exactly what you want and how you want it to sound, anyone who is good at what they do will be able to give you exactly that.

nice

good luck , once we fitted the poncams in mine got louder sounded awesome,cant wait for new set up to be finished so can know what it sounds like now

Yeah someone said it gets a deeper note, did you run Type A's or B's? Did it change the idle/drivability much?

What mods are you doing now?

If you end up dropping in to Perth, I'll show you what a real free-flowing exhaust sounds like ;) Lol.

You can definitely get true 3" exhausts that are within legal limits. Best bet is custom though, don't go off the shelf stuff. With custom you can tell them exactly what you want and how you want it to sound, anyone who is good at what they do will be able to give you exactly that.

Haha yeah ill get there this year at some stage, i am surprised we cant hear it from here from the way you describe it :P

I have a mate that is researching custom places now as he wants to quieten down the Evo for daily driving, its saving me the leg work cus i am lazy :D

HOPEFULLY have some form of updates today guys!

post-47580-0-90204800-1338185094_thumb.jpg

Update -

Boost controllers is in

044 is assembled ready to go in

Haltech wiring will start tomorrow

Wide band wiring is done, need to mount the gauge.

ECA wires are run just need to mount and connect the sensor.

The boys are completing the springs and retainers install as we speak, cams will go in next

No idea... Ill get pics etc when i go get the car (Of the old springs) to show what they meant...

HKS Exhaust cam gear was added to the list today :D

Any reason behind not heat wrapping your exhaust mani?

It will be removed and HPC coated properly with the rear housing as well..... It was bolted up and forgotten about :dry: Heat wrapping that thing would take 2 years to do!

Anyway, some random updates -

post-47580-0-07669000-1338346437_thumb.jpgpost-47580-0-19449000-1338346460_thumb.jpgpost-47580-0-94741900-1338346487_thumb.jpgpost-47580-0-21107900-1338346508_thumb.jpg

They're not wasting any time with yours man, looking good.

Ask them if they wanna fly over here real quick and rebuild my head. For free.

They are getting into it man! :thumbsup:

Ill ask the question, i am sure they will want too just cus your a top bloke :P

I am pretty keen to get Chris to heat coat the 6Boob and the rear housing... And i may still get that 4" intake pipe redone in more of a factory look, i wasnt overly happy with the finish on it...

Yeah your right you need to get more stuff heat coated : )

Did u shield the ABS unit on your setup? (assuming high mount yeah??) I am

Wondering if it's going to cause me dramas or not? And the wiring loom near the manifold is probably an issue too... PS lines? Damn heat!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
    • Does that German restaurant still exist in the old place out the NW end of Goulburn? When I say "out the NW end of"...I am really being vague. It was 1997 when I was last there, and the only point of reference I can recall is that it was on the opposite side of the main drag from the big merino. And when I say "opposite side of the main drag", I don't mean "on the main drag". It was either a couple of streets back from there, or might have even been out in the sticks a bit further. Was an old farm building or mill or somesuch. And when I say "the big merino" I might actually be thinking of a completely different part of town, because I just looked on maps and the big bugger is not where I remembered him to be! The food was good, consisting largely of various German mystery-meat sausage/loaf things and kartofflen.
×
×
  • Create New...