Jump to content
SAU Community

Recommended Posts

For the not so good news, the brilliant bonnet struts i fitted have been working well but i use the bonnet quite a lot unlike the others i guess and it has created a weak point in the bonnet and it has now effectively collapsed... Its dissapointing as the bonnet was repainted and looked pretty good up until now -

IMG_8094_zps976d370f.jpg

IMG_8096_zps5d0ba8ab.jpg

I guess this was just a freak failure and i dont think there is anything wrong with the actual product.... They are a good price and worked well, maybe too much use :(

I wouldn't bother with the temps at the hillclimb. You're not going to get them warm enough to gather decent data, and by the time you make it back to the staging area, they are going to be cooled of any heat you did make. Did he show you how to take temps?

Nope there will be no temps taken at this event! No point and i dont have the gear as yet....

Yes he showed Carmen how to do it as she is in charge ;) Gotta get a proper pyrometer etc

Anyway, representing SAU at the Nulon Nationals means time for some Nulon oils -

Corporate-Logo-black-background_zpscc39a

IMG_8103_zps205e6b82.jpg

IMG_8104_zpsd7153d39.jpg

Gearbox was a bit grubby as usual... Am going to have to mod the breathers before the next track day as both the gearbox and diff are pushing their love juices out all over the place :no:

For the not so good news, the brilliant bonnet struts i fitted have been working well but i use the bonnet quite a lot unlike the others i guess and it has created a weak point in the bonnet and it has now effectively collapsed... Its dissapointing as the bonnet was repainted and looked pretty good up until now -

IMG_8094_zps976d370f.jpg

IMG_8096_zps5d0ba8ab.jpg

I guess this was just a freak failure and i dont think there is anything wrong with the actual product.... They are a good price and worked well, maybe too much use :(

Mat, that's generally an indicator that the gas struts are carrying too much pressure for their allocated task.

Bonnet struts don't need a great deal of pressure in them; otherwise they basically become a load point like yours have done.

This kind of damage is super common on Alloy, Fibreglass & Carbon Bonnets.

The Strut re-gas guys can set strut pressure to suit particular appilcation; this will prevent a repeat performance.

I've had hatch struts gassed at a higher pressure to allow for a rear wing before.

I think this guy will be the closest to you? They are mobile; so they come to you.

Strut Re-gas Hunter

Arie Oosterveen

Cnr Church & Foundry St

Wickam NSW 2293

Ph: 02 4961 3255

  • Like 1

Yeah that was my guess, good info mate!

Not sure if i can salvage the bonnet and just keep it for now until the car becomes more track based down the track! I want to keep the nice stock look if i can!

Mat, that's generally an indicator that the gas struts are carrying too much pressure for their allocated task.

Bonnet struts don't need a great deal of pressure in them; otherwise they basically become a load point like yours have done.

This kind of damage is super common on Alloy, Fibreglass & Carbon Bonnets.

The Strut re-gas guys can set strut pressure to suit particular appilcation; this will prevent a repeat performance.

I've had hatch struts gassed at a higher pressure to allow for a rear wing before.

thanks for that. am going carbon bonnet soon and was going to use my current struts. you might have just saved me an expensive bonnet! thank you.

Bugger about the bonnet Mat, I sure hope the struts don't kill mine.

Will be interesting to see what you think of the Nulons too.

I have been using them for the whole time I've had the 33 and the 31 now is primarily Nulon filled too.

No complaints here, improvements more than anything. :D

This is your friendly reminder.

Pletty Prease.

Lol sonofabitch! I just saw this friendly reminder... The next event is at Wakefield and i assume you WILL be coming to watch ;) Then you can grab some while you are there...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...