Jump to content
SAU Community

Recommended Posts

Never had shoulder issues until doing MP, I avoid it, given the amount of people who comment similarly, I wonder if the body really likes that movement at all.

I did the movement for 9 years without issue; was probably the first exercise I ever did at the gym. Very important to start light though and don't go hero on it just because you can lift more - it probably needs flawless technique more than most exercises and your supporting muscles need time to build up too.

Start light...with an empty bar or broomstick if you have to. It's important that you have the flexibility and mobility to pull the movement off before you even consider putting a working weight on there. It doesn't take that long to get used to it; from my teaching of it, usually about 3-4 sessions before someone has a decent balance while pressing the bar overhead and maybe 8-9 before they develop the mobility to touch the bar on their neck (based on someone with poor mobility to begin with).

My 2c.

The seated version has advantages in terms of control/ isolation. Good if you are keen to work the shoulders for growth development and don't want to think too hard. Not so hard.

However, Standing press adds extra in terms of developing balance, core and suporting strength and requiring it.

People have no business really doing it without the following;

* proper thorasic spine extension . Can you extend properly? (wall slide tests on youtube)

* Scapular stablillity? (shoulder flexion test check it )

* Do you know how to brace your core

People don't learn to brace their core. This is an explanation might not be a good one.

Take a big breath of air into your belly and lock it there.

Your rib cage needs to be locked by contracting your abs.

Tighten/contract glutes

Raise up shoulders/ elbows to create a lat shelf , contract lats.

If you were taught by someone without covering these basics , then you were taught wrong. Thats before I'd explain the press.

Behind the neck press standing, is a characteristic of not having much clue with what I have seen in the past at gyms. Let alone picking the weight up off the dirt to do the movement. I won't say 'cleaning' the weight as it never looks anything like it.

Start light...with an empty bar or broomstick if you have to. It's important that you have the flexibility and mobility to pull the movement off before you even consider putting a working weight on there. It doesn't take that long to get used to it; from my teaching of it, usually about 3-4 sessions before someone has a decent balance while pressing the bar overhead and maybe 8-9 before they develop the mobility to touch the bar on their neck (based on someone with poor mobility to begin with).

This sounds like me, I do it and have sheit mobility slowly increasing my weight up and started off by not pushing myself too hard

I usually do a few sets of seated dumbbell shoulder press then move onto the standing barbell

Edited by UNR33L
  • 1 month later...

I'll have you know, I'm the owner of a fully fledged $120 Dunlop Mountain Bike I got from Big W... which I rode for maybe a month before my insistence on trying to ride everywhere in top gear saw me bend the sprocket on the rear gear set =\ Quality craftsmanship right there...

Also, I lost a bet in spectacular fashion when I failed to achieve 100km/h on the exercise bike digital speedo. The caliper/resistence system exploded and I launched off the bike around the 95km/h mark (I doubt it was accurate but it's a good story).

So I've got plenty of manly man bike experience.

Next you'll tell me you wear lycra shorts...

EDIT: Nice Dualie

Edited by ActionDan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...