Jump to content
SAU Community

Recommended Posts

Hi All,

Well, I've been thinking about making this thread for a while now, so I thought I'd just go for it. Straight away, I apologise if the updates are not so common, the photos are a bit shit or you came here thinking it is a 1000hp GTR build thread. It will show my story turning a stock car into a different daily drive. The main use of the car is a daily for my Mrs, much like other peoples stageas I guess. I hope you enjoy it, but mainly it'll be something for me to look back on and figure how stupid I wasblush.gifAnyway here we go-

THE CAR -

Its a MY05 Nissan Stagea 350RX Four. Bought from Northshore Prestige on 21/8/2010 with 45068 km. Stock as a Rock. Colour- Silverstone WV2, which only came in the series 2 M35's. It has options of reverse camera, and the popup screen with satnav/tv/trip comp/sushi hunter. The motor is a VQ35de, same as V35/Z33 spec. It as a 5 spd Auto, with a electromagnetic Attesa AWD system. I had it on the dyno stock as, it turned out 147.3kw at all 4 wheels- not a bad figure.

Mods so Far-

The very first thing to get fiddled was the tiptronic auto. Nissan in their wisdom thought it a great idea to make the upshift action a push away form the driver, instead of a pull backwards. Out with the centre console, an a snip of the wires, plug them back together, and it makes sense to drive- I'm not down shifting when I want to upshift any more.

Then the memory gets a bit hazy as to the order of things. I bought R32 GTR 4 pot front brakes wanting to fit them. The stock front brakes are woeful. They are 350Z touring spec items, which just don't hold up to a 1650kg car. The new brakes sat in my garage for ages- they didn't sit behind the stock 17" wheels.

Next to come about the same time were some uprated springs thanks to Jetwreck, and in the same couple of weeks uprated sway bars (GB from went on front and rear thanks to Daleo. These two items made a MASSIVE difference to how the car felt. Cornering is now much flatter, car feels more connected to the road. Springs are stiffer, and lower. Thanks to lowering, the stock wheels with +45 offset looked ridiculous. They sat way in the guards- something needed to be done!

Twas about this time where a HKS turbo kit suitable for 350Z's came into my life. I had nil intention of buying a turbo kit/car, but you know that point where you see something for a insanely low price, and you just buy it- well, that was me. The kit came with everything from pod filter to cat converter. All manifolds, dump, wastegate sump, etc. It runs a HKS GT3037s with a 1.12 rear, and a 60mm External gate. All thats missing was the injectors, fuel pump, and engine management. I got it, and stashed it in the garage. I couldn't fit it right away, even though I wanted to. It was like Christmas opening all those boxes!

Next up was a bit of exhaust fiddling. Looking around the US G35 sites, like 350-tech, G35 driver etc etc, it seemed a popular upgrade for V35/G35 sedans to pop on a coupé midpipe. Looking at my car, the hangers looked identical. I put in a few calls, and Northshore had a 350Z midpipe sitting around. It was the same but a little short- I got it extended a bit, and slapped it on. Great. Its just a resonator, as opposed to that massive mid-muffler that we seem to have. Great budget upgrade for exhausts, larger pipe diameter, SO much lighter than stock- and a great growly note.

I then ordered some wheels- long story, but I got stuffed around by one company for 10 weeks, before giving up. I ordered some SSR Type F's from JDM Concept. 19x8.5 +22. I got the size from BBenny, whose Enkeis are the same size, and fit very nicely. I went for the Matte Black, gold and silver just were not doing it for me. I then went O/s for work for 2 months, and O/S on holiday for 1 month.... it was all quiet...

On getting back, I sorted tyres- tirerack was the go here. Continental tyres 225/40/19- over they came from the US. I finally had the wheels on! The R32 GTR brakes went on shortly after- adapter sleeves from Scotty, and PMu pads from somewhere in QLD. Great upgrade. Much more confidence in the brakes now.

Then came the stuff to get ready for the turbo kit- Transcooler from PWR, with a thermostat from Jetwreck thumbsup.gif (not installed yet), who also installed the Transgo shift kit that he's been doing- legend! I now feel the GB should hold up to what I'll put into it. Shifts are great- smooth when on part throttle, and firm but not harsh on WOT.

And thats pretty much where it sits today. I've got the GSS342 Walbro, and some 600cc injectors on the way. Posts/Pics on the turbo kit to come-

thanks.gif

6102147089_e1faf2a2b7_z.jpg">

Edited by PN-Mad
Link to comment
https://www.sau.com.au/forums/topic/379412-pnm35-build-thread/
Share on other sites

Twas about this time where a HKS turbo kit suitable for 350Z's came into my life. I had nil intention of buying a turbo kit/car, but you know that point where you see something for a insanely low price, and you just buy it- well, that was me. The kit came with everything from pod filter to cat converter. All manifolds, dump, wastegate sump, etc. It runs a HKS GT3037s with a 1.12 rear, and a 60mm External gate. All thats missing was the injectors, fuel pump, and engine management. I got it, and stashed it in the garage. I couldn't fit it right away, even though I wanted to. It was like Christmas opening gall those boxes!

Haha, we were the same! So many beautiful items!!

Looking forward to where this ends up Alex (and what mods you do to the HKS piping and end up doing to fit the sump in particular).

Nice, will be very interested how this build goes, I personally always wondered how easy the APS Twin turbo kit for a 350z would go in a PNM35 Stag as I wouldn't mind getting another one. . .

http://www.airpowersystems.com/350z/350z.htm

Does anyone know if the dimensions in a PNM35 and 350Z engine bay are similar. . .

Does anyone know if the dimensions in a PNM35 and 350Z engine bay are similar. . .

They are very similar, hence buying the HKS kit! The differences I know of is two places. One, the front driveshaft/diff, and two, the 350Z has a hole in the front composite brace thing. Thats where it ducts cold air to the air filter. This is something that I have to work around as the intercooler outlet travels back through that hole on my kit.

In the APS kit, its where that blue hose would sit. I also except the divers side turbo outlet would have to be modified, as the diff sits where that oil filter/pipe goes.

Edited by PN-Mad

Any plans to open the motor?

Reading the classified ad I see HKS say the internals wont cope with too much boost, but they have a kit available... :whistling:

Project looks good. Look forward to updates!

3.5 litre turbo should make the 300kw easily. Stock bottom end should handle it if tuned correctly. Beefed up auto would be the priority. Car looks good - would almost be happy for it to replace my C34 when its finished!

Fantastic Post! I will be picking my Stagea SII 350 Rx this week from North Shore Prestige. These are things which have crossed my mind, and your post has answered all my questions. Can't wait to see your finished product. I'll have to keep an eye out for you!

Thanks guys. Somebody has to stand up for the NA guys out there....whistling.gif

Iamhe77 is right, the HKS kit on the stock boost they set the WG at looks to produce about 260kw on a 350Z. From all the searching around I have done, I think the stock bottom end is ok for 300kw when your running a Manual rwd G35/Z33/V35. Now I have to convert that power figure into something relative to my drive train- AWD/5AT. And we know that the Yanks are a bit dyno happy too...

One from fitting the R32 Sumitomo Brakes- the stone shields are a bitch if you don't have the right tools...pinch.gif

6232222580_19a125b74f.jpg

Stock dyno sheet- was done in 3rd gear, as 4th would be in the speed limiter.

6231780609_c90f537837.jpg

A Shot from the SAU NSW Stagea15th Anniversary Cruise:

6232302952_54fefa719c.jpg

Edited by PN-Mad

Are you planning on doing any work on the auto box to strengthen it up a bit before putting the turbo on, or just gonna see what happens?

Nice car too, it was looking really good on the 15th Anniversary cruise.

Are you planning on doing any work on the auto box to strengthen it up a bit before putting the turbo on, or just gonna see what happens?

Nice car too, it was looking really good on the 15th Anniversary cruise.

I think he's put in the Transgo shift kit...

I think he's put in the Transgo shift kit...

Will that have any effect apart from speeding up the shifts? I was thinking more in terms of protecting the gearbox from any problems caused by the increased power levels, if that is even going to be an issue.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
    • OK, so regardless of whether you did Step 1 - Spill Step 2 - Trans pan removal Step 3 - TCM removal we are on to the clean and refill. First, have a good look at the oil pan. While you might see dirty oil and some carbony build up (I did), what you don't want to see is any metal particles on the magnets, or sparkles in the oil (thankfully not). Give it all a good clean, particularly the magnets, and put the new gasket on if you have one (or, just cross your fingers) Replacement of the Valve body (if you removed it) is the "reverse of assembly". Thread the electrical socket back up through the trans case, hold the valve body up and put in the bolts you removed, with the correct lengths in the correct locations Torque for the bolts in 8Nm only so I hope you have that torque wrench handy (it feels really loose). Plug the output speed sensor back in and clip the wiring into the 2 clips, replace the spring clip on the TCM socket and plug it back into the car loom. For the pan, the workshop manual states the following order: Again, the torque is 8Nm only.
×
×
  • Create New...