Jump to content
SAU Community

Recommended Posts

Its going to be hard to find a direct stock replacement.

You are better off picking up some larger denso/sard injectors off ebay (which are low imp) and buy a nistune board for his ecu.

I picked up some Sard 550cc GTR injectors for like $500. Throw in another $200 for the nistune board. $700 all up and opened the door for future tuning :)

His got a power fc at the moment but not yet installed. I told him to fit some ID1000/Bosch injectors as he will be looking for big power down the track.

Money is the issue at the moment, but I say do it once do it right.

His got a power fc at the moment but not yet installed. I told him to fit some ID1000/Bosch injectors as he will be looking for big power down the track.

Money is the issue at the moment, but I say do it once do it right.

Sell the PowerFC and use it to pay for injectors + nistune.

Sell the PowerFC and use it to pay for injectors + nistune.

You guys should chat, his name is Justin from the beach cruise and AGM if you remember.

How come you went the Sard's and not the ID/Bosch injectors as they are only about $100 per injector?

His got a power fc at the moment but not yet installed. I told him to fit some ID1000/Bosch injectors as he will be looking for big power down the track.

Money is the issue at the moment, but I say do it once do it right.

You say it wrong bruvva... gotta say: do it phaggot.

You guys should chat, his name is Justin from the beach cruise and AGM if you remember.

How come you went the Sard's and not the ID/Bosch injectors as they are only about $100 per injector?

ah yeah i remember. With the clean r32 GTR.

SARD's were the cheapest on ebay at the time, reputable brand and it was a direct replacement for GTR. (i had gtr stock injectors wired in which failed, so easier to replace with sard gtr's)

It's also good to replace the injector plugs as they will no doubt be coroded/rusted. Mine were green, no idea how any voltage went through it...

I failed E*P*A because the inspector told me my injectors should be red and not purple, so whatever he gets make sure to paint them to stock colour. However, he wont pass EPA with a powerfc whereas with a nistune and tuned to pass emissions will ;)

Used to dominate zombie horde! 200-3 and shit...

Mad fun playing the zombies, humans didn't stand a chance against zombie me, people actually stopped playing on the server :D

ah yeah i remember. With the clean r32 GTR.

SARD's were the cheapest on ebay at the time, reputable brand and it was a direct replacement for GTR. (i had gtr stock injectors wired in which failed, so easier to replace with sard gtr's)

It's also good to replace the injector plugs as they will no doubt be coroded/rusted. Mine were green, no idea how any voltage went through it...

I failed E*P*A because the inspector told me my injectors should be red and not purple, so whatever he gets make sure to paint them to stock colour. However, he wont pass EPA with a powerfc whereas with a nistune and tuned to pass emissions will ;)

I'll pass it on to him :thumbsup:

I was going to get 550's in and hop around with that for a while untill I get the power fc in and tuned. Now im just thinking I'll get the 750's slap em in got new pod filters waiting to go in, get a adjustable FPR and I'll put my power fc in and change oils untill I can get it booked in for a tune and most likely strap it to the back or a trailer and tow it down.i dears??

Me and a coworker just smashed Nandos $21 full chicken, seriously large chips and 1.5L coke meal for 7th consecutive day.

I think I'm gonna start sweating hot & bbq sauce.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
    • Does that German restaurant still exist in the old place out the NW end of Goulburn? When I say "out the NW end of"...I am really being vague. It was 1997 when I was last there, and the only point of reference I can recall is that it was on the opposite side of the main drag from the big merino. And when I say "opposite side of the main drag", I don't mean "on the main drag". It was either a couple of streets back from there, or might have even been out in the sticks a bit further. Was an old farm building or mill or somesuch. And when I say "the big merino" I might actually be thinking of a completely different part of town, because I just looked on maps and the big bugger is not where I remembered him to be! The food was good, consisting largely of various German mystery-meat sausage/loaf things and kartofflen.
×
×
  • Create New...