Jump to content
SAU Community

Recommended Posts

out of a van at 3am nothing comes close

I guess you can rest assured that this environment would be unlikely to house rodents

As for the lygon lamb i've heard some mice/kitchen stories on it a while ago and haven't been in there since

Ooph, I hope not, haven't been there in a while. There's also a place directly opposite that does some nice things.

If you want a bad kitchen story, my mother bought a restaurant in 2001 which we renovated. While doing so we found that the septic drain from the male toilets was higher than the inlet for the bar dishwasher and had been filtering dirty water through there since the original place had opened...... Ew.

I overpay, I think it's courtesy to avoid that shit. Expecting others to pick up your shit is fked. If you end up $15 over from overpaying then leave it as a tip or buy beers at a bar.

+1 for Stalactites being shit. My friend loves them, told me he prefers to Lambs, that shit cray.

I'm with u always over pay.. But I get annoyed people want to divide by 4 (example) but my partner and I don't drink alcohol which as we all know costs alot more so it's really unfair for an even split and particularly as it happens every time so works out to be paying heaps more over the course of a year.

Yeh yeh call me tight but i think it's a bit bs.

Nah it's not tight Alex, it's called not letting money come between friends and the best way to do that is to show some brains and consideration when the bill comes round. Not talking about a dollar or two, but $60 down is ridiculous. And it's different to buying mates a beer, that shit usually balances itself out.

My deadshit friends are for most part Asian or have yellow fever and are obsessed with the idea of buying several dishes, then sharing, like a lazy susan, only we're not in a Chinese restaurant. So then they want to average the bill at the end desipite significant differences in consumption and ordering of drinks or desserts...f**k that, I know what I ordered and I know what I need to pay for!

/rant

Can u get higher than 99.95?

I hear ya brother

I hate stingy mother fkrs..

No you can't, cbf reading link. Cliffs plz?

Agreed on tight people. I'm fairly generous when people deserve it, but if you are shit with money, don't expect me/others to pay your way

Student taking the Board of studies to Tribunal because she isn't happy with her 99.95 Enter

http://www.smh.com.a...0703-21flw.html

lol @ had the option of a dictator and didn't use it. Writing fast was my biggest problem in exams, I didn't get no dictator for it. Ungrateful bitch, she'll never be happy in life.

Ric:

- student with no social life unhappy with finishing in the top 0.05% of the state

- hands get sore from writing too much, gets rests during exams and the option of someone else doing her exam for her

- got into uni course she wanted to do, still unhappy

- surprisingly learned despite unawareness of Darwinian theory

Cliffs essentially:

AFTER achieving a university entry rank of 99.95, winning fifth place in the state for chemistry and a place at the University of Sydney studying medicine, the former Abbotsleigh student Sarah Hui Xin Wong believed she could have done better in the HSC.

Sarah's mother, Eileen, lodged complaint after complaint to the school and to the Board of Studies since Sarah completed the HSC in 2008, arguing her daughter was discriminated against.

Says she could have done better, so not sure if 99.95 is the highest?

Ric aware we as you probably got 99.95

Glad I'm replacing this today. There's supposed to be organic lining between those paddles, which have <1mm left in them. 400-500 launches, several DECAs and 3 years of daily driving will do that :D

Flywheel taking forever to machine.

YeMcYm+V_original.png

I guess you can rest assured that this environment would be unlikely to house rodents

Ooph, I hope not, haven't been there in a while. There's also a place directly opposite that does some nice things.

If you want a bad kitchen story, my mother bought a restaurant in 2001 which we renovated. While doing so we found that the septic drain from the male toilets was higher than the inlet for the bar dishwasher and had been filtering dirty water through there since the original place had opened...... Ew.

omfg.. thats terrible

No you can't, cbf reading link. Cliffs plz?

Agreed on tight people. I'm fairly generous when people deserve it, but if you are shit with money, don't expect me/others to pay your way

+1 got a mate who would order his shit and then ask if you could spot him....

I'm with u always over pay.. But I get annoyed people want to divide by 4 (example) but my partner and I don't drink alcohol which as we all know costs alot more so it's really unfair for an even split and particularly as it happens every time so works out to be paying heaps more over the course of a year.

Yeh yeh call me tight but i think it's a bit bs.

I have the exact same problem! I barely ever drink, and nearly always order an entree for a main or a main at max. Peeps will buy a bottle to 'share' then split the bill evenly. Very frustrating because they don't notice the difference and if you bring it up at the end you look like a tight arse.

Usually just try to always bring notes and lots of change for the times that aren't like the above. Unless the service is terrible or it's a take away joint I'm generally adding 10-20% on top for the bill, with that margin underpaid bills rarely come about.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...