Jump to content
SAU Community

Recommended Posts

Damn now I want to eat some chicken rice.

Oh also on the topic of restaurants, night be heading to mamacita tomorrow. Anyone rate? :S

yeah went there a few weeks ago

food and drink were very good.

was on a work ebays expense account tho so that made it better ;)

Send me routine birds I are interested feeling like on a plateau at present

What are your lifting figures like? Wanna PM me with what you usually do at the gym, how often you go etc.? As detailed as possible.

Isn't there a poofy lifting thread already? If you don't lift in multiples of gearboxes, I don't want to read about it phags.

:P

They keep talking about Suppliments...

I can only assume that they'll make your gearbox seep from the rear welsh plug...

Isn't there a poofy lifting thread already? If you don't lift in multiples of gearboxes, I don't want to read about it phags.

:P

GQ Patrol gearbox with transfer case? If you can lift one you're doing well lol

There's also a homos only Stagea section for people like you :P

yeah went there a few weeks ago

food and drink were very good.

was on a work ebays expense account tho so that made it better ;)

oooh nice! haha work account? very jelly.

"what would you like this evening sir?"

-"well, to start off... 11ty tequila shots.... pls"

oooh nice! haha work account? very jelly.

"what would you like this evening sir?"

-"well, to start off... 11ty tequila shots.... pls"

Was actually would you gents like a chefs selection?

Yes

Ok we will bring matching tequilas and some jugs of margaritas

Was actually would you gents like a chefs selection?

Yes

Ok we will bring matching tequilas and some jugs of margaritas

this is how i eat at pretty much any decent restaurant i go to..

it's ALWAYS the best way to go

Congrats Tob!

When i was home gyming I was taking a mass gainer for a bit, and just ate lots of anything really I probably didn't gain that much muscle (mainly because I wasn't working out hard enough / often enough) but at least gained a bit of mass and newbie gains.

I always have a protein shake after gym but TRY to have it twice a day sometimes I forget though / don't get a chance.

The problem with me is that i think i need a gym buddy, used to have one until i changed gym. Find it harder to push myself further going solo.
Protein shake twice a day? Is this like everyday?
Aren't no body got money like that!

Yep I've got the BN chocolate :)
Birds made me do it

Currently trying Gold Standard- double rich chocolate. Not bad imo.

No secret recipe to it, though I do think I'm a good coach of technique and stepping up weight in a smart manner.

Can send you our workout, but there's a hundred ways to achieve the same thing.

Pm me? There might be hundred ways but I'm curious of the Bird's way. :)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...