Jump to content
SAU Community

Recommended Posts

anyone seen an OP6 rear GTT turbo on a 20 with a steel wheel (not highflowed as such) and 20 odd pounds rammed down it's throat?

wanna see how far I can go on a 20 without increasing lag

Stock R33 gtst turbo will get close to 200kw

I've got a hks2530 with 20psi. Gets around 230kw

Stock R33 gtst turbo will get close to 200kw

I've got a hks2530 with 20psi. Gets around 230kw

seeing as a 33 turbo cant get 200 legitimately on a 2.5 I cant see it making it on a 2.0

hence why I was wondering about the OP6 rear w steel wheel and lots of booooost

seeing as a 33 turbo cant get 200 legitimately on a 2.5 I cant see it making it on a 2.0

hence why I was wondering about the OP6 rear w steel wheel and lots of booooost

IMG_5379.jpg

uwotm8? Boss wouldn't print me out the higher run, just wanted me to suffer so I couldn't brag of 200 wattz out of a stocker.

  • Like 1

Need someone to go out and look at it.. mudgee is 4 hours from Sydney

5k, treat yourself with another 33.

Just force your kid to crawl into back* and according to insurers it's still worth more than you'll pay for it.

*applicable to coupes.

don't want a cop magnet... we have discussed this

and 4 dr is MUCH easier

Lately, I've seen cops ignoring me at rbt's, driving thru cop hot spots, slightly speeding. Dunno if it's just me or cops aren't targeting at all (at least in north and east).

*shurgs*

Parts are accessible and cheap as f**k...1jzs are cheap as f**k...I have a fresh painted shell here in deep red if you want to build one...beautiful color...come have a look , get those creative juices flowing...onky f**k around is putting a manual in it..and its 92 model so won't get club reg for a few years....you can get 89 ,90 models tho

There was an jz engineered cressy in Brighton a few weeks back...under 4k..was.mint as ...

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • oh they were with that motor, you need to remove the engine to change the spark plugs (don't have to, but it does make it easier)
    • I certainly fall into the annoyed camp, but glad to hear that if it's happening at low boost then I'm not likely going to blow a turbo and end up with metal shards in my oil. Just feels like it prevents me from really driving it without hesitation and "peak" performance. Wonder if it's the VCAM, it did an impressive job of shifting the torque curve and faster spool, but maybe now it's "too fast" and there's too much air for how open the throttle is.  Based on some other threads, will also do some reading on synchronizing the actuators. They are the default actuators that come on the Garrett's and I would think they would be set the same coming from the factory, but if the turbos don't actually work exactly the same way at the same time as previously mentioned, it would be worth making sure the actuators are actuating together properly
    • I went down this rabbit hole before, ended up sourcing a motor from the UK (I'm in Japan) which also didn't function correctly. With the original motor, I disassembled it and reassembled it and it works somewhat, sometimes. What I could deduce from all my screwing around is that there is calibration of the gears on the inside of the motor and two ramps on the main gear which activate switches that operate the motor and move the sunroof either to retract into the roof or tilt. Where I got stuck was that, it seemed in my case that one or both of the switches that are activated by the ramp on the gear did not always activate and thus the motor did not move, causing it to sometimes not retract or tilt (apologies, I've forgotten which way it didn't work.).  Of course this part is discontinued at Nissan now, it's the same part in the S15 but no other models. I also contacted the manufacturer of the component for schematics - forgot the name, they're based in Gifu - but they declined to share the information due to being bound by an NDA, sadly. Looking through my pictures now, it seems I last had a crack at this in 2022. See, I so kindly wrote "open" and "close" next to the switches. If you figure it out, please do tell me. Those little switches, with the red buttons may need to be replaced.
    • It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
×
×
  • Create New...